DIN 7339 One piece tubular rivet drawn from strip by Material, Finish and Size

Tubular Rivets are similar to Semi-Tubular Rivets: the difference being in the depth of the hollow shank. A full-tubular rivet has a much deeper hollow shank. Like all rivets, the purpose is to clamp two materials tightly together, and to achieve this, the length of the rivet shank and the depth of the tubular portion of the shank must be such that it can pass through the thickness of the parts to be clamped. Installation requires an anvil that bends the shank of the rivet outwards, locking the pieces in place.

Search thousands of Metric fasteners by DIN specification, including DIN 7339 Tubular Rivets , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

DIN 7339 Tubular Rivets by Metric Sizes

Tubular Rivets are available on the FCH Network with metric diameters that range from M2 to M2, and with metric lengths that range from 3mm to 3mm.

Click on the metric diameters or lengths below to view, or
Shop All DIN 7339 Tubular Rivets
Metric Diameters
Metric Lengths
DIN 7339 Tubular Rivets by Materials

DIN 7339 Tubular Rivets are available on the FCH Network in materials that range from Brass to Brass.

Click on the materials below to view or Shop All DIN 7339 Tubular Rivets
DIN 7339 Tubular Rivets by Coatings/Finishes

DIN 7339 Tubular Rivets are available on the FCH Network in finishes or coatings that range from Plain to Plain.

Click on the finishes below to view or Shop All DIN 7339 Tubular Rivets