DIN 7337A Domed Head Blind Rivet by Material, Finish and Size

Blind Rivets, also known as Break Stem Rivets or POP™ Rivets, are two-material tubular fasteners consisting of a tubular body with a head made of a softer material, and a mandrel made of a harder material. Blind Rivets are used to clamp two materials together, without needing access to both sides of the clamped joint. For installation, the two-material assembly is inserted into a pre-drilled hole, and the mandrel is drawn back through the rivet body, deforming it, and clamping the two materials together. On completion of the assembly, the mandrel breaks off, leaving just the head of the mandrel hidden in the body of the blind rivet.

Search thousands of Metric fasteners by DIN specification, including DIN 7337a Blind Rivets , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

DIN 7337a Blind Rivets by Metric Sizes

Blind Rivets are available on the FCH Network with metric diameters that range from M5 to M6, and with metric lengths that range from 8mm to 20mm.

Click on the lengths below to view or Shop All DIN 7337a Blind Rivets
Metric Diameters
Metric Lengths
DIN 7337a Blind Rivets by Materials

DIN 7337a Blind Rivets are available on the FCH Network in materials that range from Steel to Aluminum.

Click on the materials below to view or Shop All DIN 7337a Blind Rivets
DIN 7337a Blind Rivets by Coatings/Finishes

DIN 7337a Blind Rivets are available on the FCH Network in finishes or coatings that range from Zinc/Clear to Zinc/Clear.

Click on the finishes below to view or Shop All DIN 7337a Blind Rivets