DIN 705A Shaft Collar, form A by Material, Finish and Size
A shaft collar is a simple, ring-shaped mechanical component that fits around a shaft. Its main purposes are to hold, position, or locate other components on the shaft, such as bearings, sprockets, or gears, and to act as a mechanical stop. Shaft collars are commonly used in power transmission, automation, and machinery. They can be secured to the shaft using set screws, clamps, or other mechanisms. An adjusting ring (in mechanical contexts, sometimes called an adjustment ring or grade adjustment ring) is a ring-shaped component used to fine-tune the position or spacing of parts.
Search thousands of Metric fasteners by DIN specification, including DIN 705a Shaft Collars, in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.
DIN 705a Shaft Collars by Metric Sizes
Shaft Collars are available on the FCH Network with metric diameters that range from M2 to M100, and with metric lengths that range from M2mm to mm.
Shop All DIN 705a Shaft Collars
DIN 705a Shaft Collars by Materials
DIN 705a Shaft Collars are available on the FCH Network in materials that range from Steel to 300 Stainless (A1,A2, 18-8,304,310 etc.).
DIN 705a Shaft Collars by Coatings/Finishes
DIN 705a Shaft Collars are available on the FCH Network in finishes or coatings that range from Plain to Zinc/Clear.