DIN 671 Turned, Ground & Polished Round Shafting by Material, Finish and Size
Ground & Polished Shafting is a round shaft or rod, ground and polished to a specified diameter. The purpose of the shaft is usually to allow a pulley or sprocket or gear to be locked in place on the shaft (by welding, screwing, etc.) so that mechanical power can be transmitted to another mechanical device. However, a ground shaft may also be used as an axle for a wheel or other rotating device.
Search thousands of Metric fasteners by DIN specification, including DIN 671 Ground & Polished Shafting, in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.
A ground shaft may also be used as an axle for a wheel or other rotating device, or it may be used with a sprocket or pulley to transmit mechanical power from one device to another.
Common applications of Ground & Polished Shafting are:
- • Bicycles
- • Motorcycles
- • Combustion Engines
- • Turbines
- •
DIN 671 Ground & Polished Shafting by Metric Sizes
Ground & Polished Shafting are available on the FCH Network with metric diameters that range from M3 to M70, and with metric lengths that range from 12mm to 16mm.
DIN 671 Ground & Polished Shafting by Imperial/ Sizes
Ground & Polished Shafting are available on the FCH Network with imperial diameters that range from 1 to 1 1/4, and with lengths that range from 10 to 10.
DIN 671 Ground & Polished Shafting by Materials
DIN 671 Ground & Polished Shafting are available on the FCH Network in materials that range from Steel to Brass.
DIN 671 Ground & Polished Shafting by Coatings/Finishes
DIN 671 Ground & Polished Shafting are available on the FCH Network in finishes or coatings that range from Plain to Plain.