FCH Member Advertisement
FCH News
Turned, Ground & Polished Shafting
Ground & Polished Shafting is a round shaft or rod, ground and polished to a specified diameter. The purpose of the shaft is usually to allow a pulley or sprocket or gear to be locked in place on the shaft (by welding, screwing, etc.) so that mechanical power can be transmitted to another mechanical device. However, a ground shaft may also be used as an axle for a wheel or other rotating device.
0 Turned, Ground & Polished Shafting (din 671), showing 200, (click on any line for more information)
| Buy Ground & Polished Shafting from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Turned, Ground & Polished Shafting | Aluminum | Plain / Furnace Black | 1 1/2 x 1 | 1-1/2 x1 flap wheel 60g aluminum oxide 1/4 round shaft | 10 |
|
| OneMonroe | NC | Turned, Ground & Polished Shafting | Aluminum | Plain / Furnace Black | 2 1/2 x 1 | 2-1/2 x 1 flap wheel 80g aluminum oxide 1/4 round shaft | 28 |
|
| OneMonroe | NC | Turned, Ground & Polished Shafting | Aluminum | Plain / Furnace Black | 3 x 2 | 3 x2 flap wheel 120g aluminum oxide 1/4 round shaft | 8 |
|
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | #10-24 | drive shaft #10-24 & #10-32 | 1 |
| |
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | M4 | drive shaft m4 | 29 |
| |
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | M5 | drive shaft m5 | 8 |
| |
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | 1/4 | 2 type r med backer 1/4 shaft | 5 |
| |
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | M6 | m6 drive shaft | 4 |
| |
| OneMonroe | NC | Turned, Ground & Polished Shafting | Plastic | Plain / Furnace Black | non-adjustble plastic w/shaft | 85 |
| |
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | 1 x 1 x 1/4 | 1 x 1 x 1/4 shaft 80 grit flap wheel | 6 |
| |
| RePneu To | MI | Turned, Ground & Polished Shafting | Plain / Furnace Black | 3/8 x 3/8 x 1/8 | 3/8 x 3/8 x 1/8 shaft 120 grit flap wheel | 14 |
| |
| Century | FL | Turned, Ground & Polished Shafting | Plain / Furnace Black | 3 1/2 | 1000 3 1/2 shaft proj.(standard)keyed same w/key q2a | 99 |
| |
| Century | FL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | .1875 x 1.7 x .38 x .06 | 21250 headed roller shaft stl rohs compl zinc clr per print .1875 x 1.7x.38x.06 | 1600 |
|
| Century | FL | Turned, Ground & Polished Shafting | Plain / Furnace Black | M6 | myonic washer-6 circlip external 6mm shaft | 700 |
| |
| Century | FL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/4 | external e ring 1/4 shaft steel zinc (rohs) | 83 |
|
| Century | FL | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 3/8-16 x 4.75 | 3/8-16 x 4.75 double end curved shaft steel(see print) zinc/yel rev-a q5b parker parker | 804 |
|
| Global | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 0.250 x 4.75 | a3-47 pic shaft 18-8 304 steel 0.250 odx4.75 l | 6 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Plain / Furnace Black | rk4500-041-ks cap shaft mcs (industrial only) | 11 |
| ||
| IndexFast | CA | Turned, Ground & Polished Shafting | 6941583801 shaft-heater air vent door acetal/natural | inquire |
| |||
| NAPPCO | TX | Turned, Ground & Polished Shafting | M3 | 3 self locking external push-on shaft | 855 |
| ||
| NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | 1/4 | 1/4 shaft dia ext gripping ret.ring stl | 1800 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 225 | 225 hair pin cotter zinc (5/16 shaft x 1-3/32) | 750 |
|
| Active | TN | Turned, Ground & Polished Shafting | Plain / Furnace Black | mb-04 bearing lock washer m20 dia shaft | 25 |
| ||
| Active | TN | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 7/16-1/2 | bow-120 bowtie cotter for 7/16-1/2 shaft zinc | 193 |
|
| Active | TN | Turned, Ground & Polished Shafting | Plain / Furnace Black | M16 | m16 shaft push on nut plain finish | 50 |
| |
| Active | TN | Turned, Ground & Polished Shafting | Plain / Furnace Black | M17 | m17 shaft push on nut plain finish | 50 |
| |
| Active | TN | Turned, Ground & Polished Shafting | Plain / Furnace Black | 3.1 | 3.125-16 special shaft lock nut | 2 |
| |
| Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 | 1/4 shaft dia-crescent ret ring stainless c-25ss/see/ret510325ss | c-25ss/see/ret510325ss | c-25ss/see/ret510325ss | c-25ss/see/ret510325ss | 300 |
|
| Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | .174 | .174 shaft size #8x.031 washer-18-8 304 steel z4-8 | 930 |
|
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | tx-75stpa 3/4 ext push-on shaft ring stl | 4000 |
| |
| SWACO | OH | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5100-125h ret. ring for shaft 1.25 s/s | 609 |
| |
| SWACO | OH | Turned, Ground & Polished Shafting | 07430-01110 avdel drive shaft | 6 |
| |||
| SWACO | OH | Turned, Ground & Polished Shafting | 07555-00748 avdel 1/4 drive shaft | 1 |
| |||
| SWACO | OH | Turned, Ground & Polished Shafting | 10 | 07555-00750 avdel drive shaft #10 | 2 |
| ||
| SWACO | OH | Turned, Ground & Polished Shafting | 07555-01003 avdel 3mm drive shaft | 2 |
| |||
| SWACO | OH | Turned, Ground & Polished Shafting | 07555-01008 avdel 8mm drive shaft | 1 |
| |||
| SWACO | OH | Turned, Ground & Polished Shafting | aas-a1-25 precision ground shaft | 52 |
| |||
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Phosphate | .781 | .781 ret ring for shaft sprst phos (sh-78st pa) | 2000 |
|
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Phosphate | .551 | .551 ret ring for shaft sprst phos (sh-55st pa) | 9550 |
|
| SWACO | OH | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 0.375 | sh-37ss external retaining ring 0.375 shaft ss | 645 |
|
| Jay-Cee | MI | Turned, Ground & Polished Shafting | #22 | #22 shaft for bp-60 tool | inquire |
| ||
| S+S Faste | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1 3/16 | .080 wire 1-3/16 overall lg hair pin zn 3/32 drill hole 1/4 minimum shaft 3/8 maximum shaft 1/4 inside eye | 196 |
|
| OneMonroe | MN | Turned, Ground & Polished Shafting | Plain / Furnace Black | axle shaft for steer wheels | 3 |
| ||
| Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M17 | 17mm external shaft ring stainless dsh-15ss | dsh-15ss | dsh-15ss | 15,000 |
|
| Liberty | IL | Turned, Ground & Polished Shafting | Steel | Phosphate | c rectangular push on nut for 1/2 shaft phos | 16,000 |
| |
| QFC | TX | Turned, Ground & Polished Shafting | flap wheel 1 1/2 x1 60 grit 1/4 round shaft 10/pkg | 10 |
| |||
| METRO IND | OH | Turned, Ground & Polished Shafting | Plain / Furnace Black | 1/4-20 | 1/4-20 3m roloc disc pad mandrel/arbor shaft 1/4 | 293 |
| |
| METRO IND | OH | Turned, Ground & Polished Shafting | Plain / Furnace Black | 3/8 | 3/8 hole 1/4 shaft mandrel | 3 |
| |
| METRO IND | OH | Turned, Ground & Polished Shafting | Plain / Furnace Black | 1/4 | 1/4 & 3/8 hole bell mandrel 1/4 shaft | 10 |
| |
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/2 | 1/2 shaft surelock ring zinc | 14000 |
|
| MtrcSpec | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M7 | M7 shafting a-2 ss | stock |
|
| MtrcSpec | CA | Turned, Ground & Polished Shafting | M30 | M30 shaft lock washer | stock |
| ||
| MtrcSpec | CA | Turned, Ground & Polished Shafting | M14-10 | M14-10. shaft nut din 1804 din 1804 | stock |
| ||
| FastWare | Sask | Turned, Ground & Polished Shafting | gear box shaft | 8 |
| |||
| Endries | WI | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3.402 x 3.543 | 3.402 id x 3.543 shaft diam ret. ring 302ss | 100 |
|
| Endries | WI | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3.023 x 3.149 | 3.023 id x 3.149 shaft diam .061 thk ret rng 302ss | 100 |
|
| Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .0625 x 1 | .0625 x 1 knurled shaft 300 series stainless steel parts to be made per drawing | parts to be made per drawing | parts to be made per drawing | 26,000 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Phosphate | 2.375 | ret ring ext bev 2.375 shaft stl/phos | 275 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Plain / Furnace Black | 1/4 | 4l1-ff-642 nyliner bearing snap-in for 1/4 shaft | 223 |
| |
| CNB | IL | Turned, Ground & Polished Shafting | Steel | ASTM F1941-10 Fe/Zn | 1/2 | 1/2 shaft retention washer spring steel electroplated per astm f1941 fe/zn 5c per print 11812 0 | 1086 |
|
| METRO IND | OH | Turned, Ground & Polished Shafting | Plain / Furnace Black | 1/2 x 24 | 1 1/2 x 24 flex shaft lighted pick up | 1 |
| |
| OneMonroe | MN | Turned, Ground & Polished Shafting | Plain / Furnace Black | axle shaft for steer wheels | 3 |
| ||
| OneMonroe | MN | Turned, Ground & Polished Shafting | Plain / Furnace Black | barrel nut & shaft retainer asst | 1 |
| ||
| Endries | WI | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 | ss1-113 10mm stainless steel inner race shaft spacer (berg) | 4120 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 216 1/2in shaft x1-15/16 hair pin cotter trivalent clear zinc | 790 |
| |
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 213 | 213 hair pin cotter yellow zinc (1/4 shaftx1-3/16) | 2568 |
|
| F. Solutions | OH | Turned, Ground & Polished Shafting | 2ba | cgw 2 backing pad turn on style 1/4 shaft | 8 |
| ||
| Endries | WI | Turned, Ground & Polished Shafting | 3 x 1 | 3x1 flap wheel 60 grit 1/4 round shaft mounted | 15 |
| ||
| Endries | WI | Turned, Ground & Polished Shafting | 3 x 1 | 3x1 flap wheel 120 grit 1/4 round shaft mounted | 5 |
| ||
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | 1/4 shaft external retainig ring blk phos stacked | 8640 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Black Oxide | 1 x 1 | 1 double split shaft collar blk ox 1/box | 148 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | six-inch acid brushes tin shaft with natural or nylon bristles | 144 |
| |
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 24 | .2184 +0/-.0002 x 24 shaft 303sst () () | 481 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 316, 317, A4 Stainless | Plain / Furnace Black | x 6 | .2500 +.000/-.0002 x 6 shaft 316 sst () () | 136 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .24975 +0/-.0001 x 1.375 shaft 303sst () () | 299 |
| |
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 15.974 | 15.974mm +0/-.005 x 900mm shaft 303sst () () | 44 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 2.500 | .1247 +0/-.0002 x 2.500 shaft 303sst () () | 157 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 2.250 | .1247 +0/-.0002 x 2.250 shaft 303sst () () | 135 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 2.000 | .2497 +0/-.0002 x 2.000 shaft 303sst () () | 63 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 3.750 | .1247 +0/-.0002 x 3.750 shaft 303sst () () | 61 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 36 | .7497 +0/-.0004 x 36 shaft 303sst () () | 2 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 2.000 | .2497 +0/-.0002 x 2.000 shaft 303sst () () | 25 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3.993 | 3.993mm +0/-.005 x 40 prec shaft 303sst () () | 28 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | x 1.375 | .1247 +0/-.0002 x 1.375 shaft 303sst () () | 33 |
|
| Komar | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/64 x 1 3/16 | 5/64x1 3/16 oa. hairpin cotter-3/8 shaft zinc | 1100 |
|
| Olander | CA | Turned, Ground & Polished Shafting | 5.992 | 5.992mm 0.000+/-0.005 x 900mm shaft () | 8 |
| ||
| Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
| Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
| Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
| Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
| Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
| SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 36 for 8070 pkt door blk 10/bx | 14 |
| |
| SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 48 for 8090 pkt door blk 10/bx | 11 |
| |
| SII | IN | Turned, Ground & Polished Shafting | rev-a-shelf upper shaft f or 6072 6073 & 6272 post | 7 |
| |||
| SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 72 for 8090 pkt door blk 10/bx | 10 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .4997 x 2.0 | shafting prec ground .4997x2.0 303 s/s | 50 |
|
| OneMonroe | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | inner race shaft spacer 300 18-8 304 .250 idx.375 odx.010 thick | 100 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | Brass | Nickel Plated | panel bearing 1/4 shaft 3/8-32 thread. brass/nickel w/nut. | 1 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | Aluminum | Anodized | shaft hanger .500 shaft od cast alum blk anodized | 2 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .035 | e-ring shaft diameter .375 od .680 thickness .035 18-8 304 steel | 20 |
|
| IPC | VA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 2 3/8 | 18-8 304 steel hairpin cotter (for shaft 1/2-5/8 ) 2 3/8 long | 2,488 |
|
| OneMonroe | TX | Turned, Ground & Polished Shafting | Brass | Nickel Plated | panel bearing assembly 1/4 shaft 3/8-32 brass/nickel | 3 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair pin clip .125-.187 shaft dia mb spring wire plated | 4941 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | flange style 8mm shaft size | 18 |
| |||
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M6 | shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M5 | shafting din 671 steel plain | 7 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M13 | shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M12 | shafting din 671 steel plain | 5 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M15 | shafting din 671 steel plain | 76 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M20 | shafting din 671 steel plain | 115 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M25 | shafting din 671 steel plain | 89 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M40 | shafting din 671 steel plain | 24 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M45 | shafting din 671 steel plain | 1 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M65 | shafting steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6 | shafting din 671 a2 s/s steel plain | 50 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 | shafting din 671 a2 s/s steel plain | 56 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M11 | shafting din 671 a2 s/s steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M14 | shafting din 671 a2 s/s steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M15 | shafting din 671 a2 s/s steel plain | 9 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M19 | shafting din 671 a2 s/s steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M30 | shafting din 671 a2 s/s steel plain | 1 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Brass | Plain / Furnace Black | M5 | shafting din 671 brass plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Brass | Plain / Furnace Black | M7 | shafting din 61 brass plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Brass | Plain / Furnace Black | M14 | shafting din 671 brass plain | 9 |
|
| BoltCraft | NE | < td>Turned, Ground & Polished ShaftingGrade A36 | 5/8 x 11.75 | 5/8 x 11.75 shaft machined and drilled per dwg. 15161026 matl a36 | 24 |
| ||
| SIS | AZ | Turned, Ground & Polished Shafting | 1/8 | e-ring 1/8 shaft | 100 |
| ||
| SIS | AZ | Turned, Ground & Polished Shafting | Steel | Phosphate | 13/64 | 13/64 od push nut blk-phos steel for 1/16 shaft diam | 3000 |
|
| TSF | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .1872 x 24 | precision ground shafting 303 ss .1872 x 24 +0.0/-.0002 | 2 |
|
| General F | MI | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | .375 x 4.050 | adjustment guide | 4,019 |
|
| General F | MI | Turned, Ground & Polished Shafting | Steel | Plain / Furnace Black | M46.68 x 118.5 | M46.68 x 118.5 rod-push inter axle | 220 |
|
| IRF | NJ | Turned, Ground & Polished Shafting | trigger shaft | 23 |
| |||
| IRF | NJ | Turned, Ground & Polished Shafting | trigger shaft | 23 |
| |||
| IRF | NJ | Turned, Ground & Polished Shafting | centering shaft | 20 |
| |||
| IRF | NJ | Turned, Ground & Polished Shafting | centering shaft | 20 |
| |||
| IRF | NJ | Turned, Ground & Polished Shafting | drive shaft assembly | 8 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 13.25 long 1-1/4 1045 cr shaft | 150 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 10.375 long 1-1/4 1045 cr shaft with hole drilled | 150 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 11.75 long 1-1/4 1045 cr shaft | 125 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 8 long 1-1/4 1045 cr shaft with hole drilled zinc | 100 |
| |
| BoltCraft | NE | Turned, Ground & Polished Shafting | 9.25 long 1-1/4 1045 cr shaft | 50 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 6.25 long 1-1/4 1045 cr shaft | 50 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 10.63 long 1-1/2 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 7.75 long 1-1/4 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 5.375 long 1-1/4 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 7.5 long 1-1/2 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 2.875 long 5/8 1018 cr shaft with hole drilled | 1 |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 8 long 1-1/4 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 9.13 long 1-1/4 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 7.5 long 1-1/4 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 7.06 long 1-1/4 1045 cr shaft | inquire |
| |||
| BoltCraft | NE | Turned, Ground & Polished Shafting | 7.63 long 1-1/4 1045 cr shaft | inquire |
| |||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
