FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| IPC | VA | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | Steel | Zinc/Clear | nordlock 12 inner 13 0(mm) outer 19 5(mm) 2 5 thickness zinc | 6 |
| |
| IPC | VA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1 | 5/16-18x1 f.h. soc c/s 18-8 ss | 5,000 |
|
| IPC | VA | Heavy Hex Nut | Brass | Plain | 1/2-13 | 1/2-13 heavy hex nut brass | 3,925 |
|
| IPC | VA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | o-ring silicone 70 duro material certs required [e-3918-90] (buckeye rubber only) cure date required | 90 |
| |
| IPC | VA | Machine Screw Nut | Steel | Zinc/Yellow | #8-32 | 8-32 hex machine screw nut steel zinc yellow | 3,657 |
|
| IPC | VA | Metal Drill Bits | Steel | Black Oxide | 15/32 | 15/32 black oxide fractional drill bit | 11 |
|
| IPC | VA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #10-24 x 3/8 | 10-24x3/8 pan phil t/c type-f zinc | 485 |
|
| IPC | VA | Slotted Round Nut (Shaft Nut) | Steel | Plain | n-04 bearing locknut steel | 585 |
| |
| IPC | VA | CD Weld Stud | Copper | Plain | 5/16-18 x 1 1/4 | 5/16-18x1 1/4 steel capacitor discharge weld stud copper flash with flange | 9,987 |
|
| IPC | VA | Slotted Spring Pin (Roll Pin) | Steel | Plain | M3 x 30 | M3x30 roll pins lindstrom only iso 8752 | 1,000 |
|
| IPC | VA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 2 | #8x2 f.h. phil t/s 18-8 s/s steel type-a | 600 |
|
| IPC | VA | Pipe Bushing | Steel | Plain | 3/8 | 3/8-nptx1/8 hex bushing steel | 131 |
|
| IPC | VA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1 1/4-7 x 4 | 1 1/4-7x4 a325 hvy structural bolt steel partial thread hot dip galvanized mtr required | 55 |
|
| IPC | VA | Electrical Lugs & Terminals | nylakrimp butt splice for 8 awg wire molex | 200 |
| |||
| IPC | VA | Machine Screw | Steel | Zinc/Clear | #10-32 x 1/2 | 10-32x1/2 f.h. phil m/s steel cr3 zinc-rohs | 9,400 |
|
| IPC | VA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 | 1/4-28 finished hex nut 18-8 s/s steel | 5,122 |
|
| IPC | VA | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 3/4 | 1/4-20x3/4 r.h. slotted. m/s zinc | 2,975 |
|
| IPC | VA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 | #10 f.w. 18-8 s/s id .218xod .437xthk .036/.065 | 1,570 |
|
| IPC | VA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 3/4 | #8x3/4 pan head phillips tapping screw type-b steel .0003 minimum thick cr3 zinc-rohs | 2,550 |
|
| IPC | VA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M20-2.50 x 50 | M20-2.5x50 hex cap screw class 8.8 steel zinc din 933 | 479 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
