FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| MESAFAST | CA | F436 Round Structural Washer | Steel | Galvanized | 2 | 2 sae f436 flat washer hardened steel hdg usa | 3.0 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 16 | soc c/s patch 360 18-8 ss | 122 |
|
| MAINSOURC | NH | F436 Round Structural Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 | 1 flt wshr f436 xylan 1424 stl | 42 |
|
| MAINSOURC | NH | Flat Washer | Brass | Plain | #10 x 10 | #10 flt wshr 10s (.200x.437x.036) | 886 |
|
| MAINSOURC | NH | F436 Round Structural Washer | Steel | Galvanized | 3/8 | flt wshr astm f436 stl hdg | 6165 |
|
| MAINSOURC | NH | F436 Round Structural Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4 | flt wshr f436 xylan 1424 stl | 27 |
|
| MTP | CA | Flat Washer | Steel | Zinc/Clear | M36 | m36 din 125-stl zn flat washers | 102 |
|
| MTP | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M36 | m36 din 125a2 s.s flat washers | 550 |
|
| MTP | CA | Split Lock Washer | Steel | Plain | M36 | m36 din 127-stl plain split l/washers | 3,083 |
|
| MTP | CA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M36 | m36 din 127a2 s.s split l/washers | 177 |
|
| MTP | CA | Grooved Pin | Steel | Plain | M4 x 36 | m4 x 36 din 1472-stl pln groove taper pins | stock |
|
| MTP | CA | Hex Jam Nut | Steel | Zinc/Clear | M6 | m6 din 936-4 zn hex jamnuts | 126,375 |
|
| MTP | CA | Hex Jam Nut | Steel | Plain | M42 | m42 din 936-4 plain hex jam nuts | 6 |
|
| MTP | CA | Hex Jam Nut | Steel | Zinc/Clear | M24-2.00 | m24-2.00 din 936-4 zn hex jam nuts | 669 |
|
| MTP | CA | Hex Jam Nut | Steel | Zinc/Clear | M22 | m22 din 936-4 zn hex jam nuts | 335 |
|
| MTP | CA | Hex Jam Nut | Steel | Zinc/Clear | M24-1.50 | m24-1.50 din 936-4 zn hex jam nuts | 3,313 |
|
| MTP | CA | Hex Jam Nut | Steel | Zinc/Clear | M27 | m27 din 936-4 zn hex jam nuts | stock |
|
| MTP | CA | Hex Jam Nut | Steel | Plain | M36--2.00 | m36 -2.00 din 439-4 plain hex jam nuts | 1,491 |
|
| MTP | CA | Hex Jam Nut | Steel | Zinc/Clear | M30 | m30 din 936-4 zn hex jam nuts | 69 |
|
| FasSpcMfg | FL | Flange Screw w/o serr. (Frame Bolt) | Ni-Cu Alloy (Monel, K-Monel, etc.) | Nickel Plated | #10-32 x 5/8 | 10-32 x 5/8 special hex head flange bolt nickel 200 dwg no markings dwg# 300653621 afi#102139240 | 1 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | ASTM A574 | Plain | #10-36 x 1/2 | 10-36 x 1/2 socket set flat point alloy rc 45-53 | 50 |
|
| FasSpcMfg | FL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 1/4-20 x 3/8 | (revision 93386a436) 1/4-20 x 3/8 socket set cup point ni-cu 400 2a fit | 2 |
| |
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 socket cap invar 36 | 2 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | ASTM A574 | Plain | 5/16-18 x 5 1/4 | 5/16-18 x 5 1/4 hex cap full thread alloy rc 36-43 | 2 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 5/8 | 5/16-24 x 5/8 1936 series soc cap 18-8 stainless | 4390 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | 5/8-11 x 2 1/4 | 5/8-11 x 2-1/4 1936 series socket cap alloy | 6 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/16 x 3/8 | 1/16 x 3/8 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/16 x 1/2 | 1/16 x 1/2 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/32 x 3/8 | 3/32 x 3/8 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/32 x 1/2 | 3/32 x 1/2 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/32 x 1 | 3/32 x 1 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/32 x 3/4 | 3/32 x 3/4 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/8 x 3/8 | 1/8 x 3/8 dowel pin 416 stn rc 36-42 | 90 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/16 x 5/8 | 3/16 x 5/8 dowel pin 416 stainless ms pins rc 36-40 | 111 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/16 x 3/4 | 3/16 x 3/4 dowel pin 416 stn rc 36-42 | 100 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/16 x 1 | 3/16 x 1 dowel pin 416 stainless rc 36-42 | 90 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4 x 2 | 1/4 x 2 dowel pin 416 stn rc 36-42 (diam .2501/.2503) | 49 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4 x 1 1/2 | 1/4 x 1 1/2 dowel pin 416 stn rc 36-42 | 175 |
|
| FasSpcMfg | FL | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 5/16 x 1 | 5/16 x 1 dowel pin 416 stainless rc 36-40 | 663 |
|
| Alma Bolt | MI | Flat Washer | Steel | Zinc/Clear | .320 x .562 x .036 | .320 idx.562 odx.036 tk zi flat (specials only) | 22500 |
|
| Alma Bolt | MI | Round Male/Female Standoff | Nylon (Polyamide) | Plain | 36832mf200 #8-32 male/female threaded s/o | 290 |
| |
| Alma Bolt | MI | Machine Bushings | Steel | Plain | #36-02 15/16 x 9/16 x 14 | #36-02 15/16 odx9/16 id 14gg regular machinery bushing | 98 |
|
| Alma Bolt | MI | F436 Round Structural Washer | Steel | Plain | 3/8 | a325 flat (f436) | 72 |
|
| Alma Bolt | MI | Steel | .300 hd 1-3/4 #50036 rawl powder actuated pins | 2101 |
| |||
| MESAFAST | CA | F436 Round Structural Washer | Steel | Galvanized | 2 | 2 sae f436 flat washer hardened steel hdg usa | 3.0 |
|
| BIG BOLT | IL | Hex Head Cap Screw | Class 10.9 | Plain | bolt & c/s c/s m36x200blanks | 380 |
| |
| BIG BOLT | IL | Hex Head Cap Screw | Grade A | Plain | x 36 | bolt & c/s c/s 2x36 | 25 |
|
| BIG BOLT | IL | Fully Threaded Stud (All Thread) | Steel | Plain | studs & threaded rodfully threaded stud (all thread)5/8-8x36fulthr | 250 |
| |
| BIG BOLT | IL | Hex Head Cap Screw | Class 8.8 | Plain | bolt & c/s c/s m36x400blanks | 600 |
| |
| BIG BOLT | IL | Fully Threaded Stud (All Thread) | Steel | Plain | studs & threaded rodfully threaded stud (all thread)3/4-6x36fulthr | 250 |
| |
| BIG BOLT | IL | Hex Head Cap Screw | Class 10.9 | Plain | bolt & c/s c/s m36x150fulthr | 1500 |
| |
| BIG BOLT | IL | Hex Head Cap Screw | Class 10.9 | Plain | bolt & c/s c/s m36x450blanks | 430 |
| |
| SJS Prod | CA | Foam Tape | Steel | Zinc/Clear | 1/2 wide 36yds foam tape ul 746c rohs | 24 |
| |
| SJS Prod | CA | Foam Tape | Steel | Zinc/Clear | 1/2 wide 36yds foam tape ul 746c rohs | 2 |
| |
| Olander | CA | Hex Male/Female Standoff | Steel | Plain | #4-40 x .636 x 3/16 1/4 | 4-40 x .636 x 3/16 hex m/f 1/4 thd lgth s () () | 1720 |
|
| Olander | CA | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | associated spring ext spring sst () () | 85 |
| ||
| Olander | CA | Flat Washer | Nylon (Polyamide) | Plain | f/w nyl .096-.136-.040 () () | 292 |
| |
| Global | CA | Hex Male/Female Standoff | Plastic | Plain | 36m30mf016 microplastics m/f standoff 6 mm hex x 16 mm l m3-.5 thd ny | 729 |
| |
| SJS Prod | CA | fastex p/n 220-636300-00-0101 |
| |||||
| SJS Prod | CA | Duct Tape | conductive adh.trans.tape 1/2 x36 yds |
| ||||
| SZS | MI | F436 Round Structural Washer | Steel | Galvanized | 5/8 | 5/8 f436 flat washer hot dip galvanized domestic | 85297 |
|
| FastWare | Sask | Hex Head Cap Screw | Grade 5 | Plain | 1 1/8-7 x 2 3/8 | nc c/s f/t c/w nylon locking patch (8 threads 360 degrees ) rev a | 1,012 |
|
| FastWare | Sask | Hex Jam Nut | Class 4.8 | Zinc/Clear | M10-1.50-/6 | M10-1.50 hex jam nut class 4/6 din 936 | 4,674 |
|
| FastWare | Sask | Hex Jam Nut | Class 4.8 | Plain | M20-1.50-/6 | M20-1.50 hex jam nut class 4/6 din 936 | 90 |
|
| FastWare | Sask | Hex Jam Nut | Class 4.8 | Plain | M14-1.50-/6 | M14-1.50 hex jam nut class 4/6 din 936 | 84 |
|
| FastWare | Sask | Carriage Bolt | Class 8.8 | Zinc/Yellow | M12-1.75 x 150 | c/b short neck 36 tl iso 8678 | 3,060 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | M13 x 35 | 13 idx35 odx5 thick hardened flat 1040-1065 36-42 hrc mechanical | 12,210 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | 17.5 | mm idx30mm odx4mm thick hardened flat c1040-c1065 rc 36-42 | 85,088 |
|
| FastWare | Sask | Flat Washer | Steel | Phosphate | 25 | .8mm idx56.5mm odx6mm thick hardened flat c1045 36-42 hrc coated | 9,367 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | M31 x 56 x 4 | 31 idx56 odx4 thick flat c1045 thru-hardened rc36-42 | 4,050 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | 11.4 | mm idx22.9mm odx3.05mm thick hardened flat astm a684 1050-1065 hrc 36-42 rev a | 2,970 |
|
| FastWare | Sask | Flat Washer | Steel | Phosphate | 15.3 | mm idx28.5mm odx3mm thick hardened flat c1045 36-42 hrc coated | 1,595 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | M17 x 50 | 17 idx50 odx8 thick flat astm a576 1045 thru-hardened 36-42 hrc rev c | 1,698 |
|
| FastWare | Sask | Flat Washer | Steel | Plain | 18.25 | mm idx38.1mm odx2.65mm thick hardened flat 1040-1065 36-42 hrc rev a | 484 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | M17 x 70 | 17 idx70 odx6 thick flat thru-hardened hrc36-42 c1045 | 280 |
|
| FastWare | Sask | Flat Washer | Class 8.8 | Phosphate | M38.8 | idx78.5 odx7 thick hardened flat 1040-1065 36-42 hrc coated | 319 |
|
| FastWare | Sask | Flat Washer | Steel | Phosphate | 32 | .8mm idx56.5mm odx5mm thick hardened flat 1040-1065 36-42 hrc coated | 554 |
|
| FastWare | Sask | Flat Washer | Steel | Zinc/Yellow | 22.4 | mm idx50mm odx9mm thick hardened flat 1040-1065 36-42 hrc mechanical | 17 |
|
| FastWare | Sask | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Yellow | M8 x 36 | 8x36 slotted roll pin heavy duty iso 8752/ din 1481 | 45 |
|
| FastWare | Sask | Round Spacer | Steel | Plain | 0.364 x 0.540 x 1/2 | 0.364 idx0.540 odx1/2 long spacer | 1,478 |
|
| FastWare | Sask | Hex Jam Nut | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3/4-16 x 1 1/8 | afx1/4 thick nf lht hex jam nut SAE j463 copper uns c36000 | 27 |
|
| KBS | TN | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 7 x 1/4 x 7/8 | 7 x1/4 x7/8 a36m alum.metabo grind wheel | 1 |
| ||
| KBS | TN | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Fiber | Plain | 4 x 5/8 | 4 x5/8 alox 36g resinfibredisc | 50 |
|
| KBS | TN | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 7 x 1/4 x 5/8 11 | 7 x1/4 x5/8-11 a36o stain.metabo grind wheel | 8 |
| ||
| KBS | TN | Steel | #4 x 36 | 4x36ft checkerboard warn.tape black/white | 11 |
| ||
| KBS | TN | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Plain | 7/16-14 x 3/4 | 7/16-14 x 3/4 flange bolt w/360 degree patch gr 5 b18.2.1 | 2,300 |
|
| KBS | TN | Hex Head Cap Screw | Class 8.8 | Plain | M36-3.00 x 100 | m36-3.0 x 100 din hex c/s 8.8 | 15 |
|
| KBS | TN | Hex Head Cap Screw | Class 8.8 | Plain | M36-4.00 x 100 | m36-4.0 x 100 din hex c/s 8.8 fullthread! | 50 |
|
| KBS | TN | Hex Head Cap Screw | Class 8.8 | Plain | M36-4.00 x 100 | m36-4.0 x 100 din hex c/s 8.8 | 43 |
|
| KBS | TN | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .50-.91 | .50-.91 s/s mini hose clamp 36-08 | 460 |
|
| KBS | TN | Machine Taps | #4-36 | 4-36 carb.rethread bottom tap | 33 |
| ||
| KBS | TN | Machine Taps | #4-36 | 4-36 carb.rethread taper tap | 51 |
| ||
| KBS | TN | Double End Stud | Steel | Plain | 3/4-10 x 36 3/4 | 3/4-10 x 36.75 dbl end stud w/nutwelded b18.31.2 | 39 |
|
| KBS | TN | Finished Hex Nut | Steel | Plain | M36-4.0--10 | m36-4.0 metric hex nut class-10 | 12 |
|
| KBS | TN | Socket Head Cap Screw | Steel | Plain | 3/4-10 x 2 | 3/4-10 x 2 !!?1936 soc cap screw b18.2.1 b18.3 | 20 |
|
| KBS | TN | Bulbs, Lamps, LEDs | wilton b.a.s.h.14# 36 sledge hammer | 1 |
| |||
| KBS | TN | Eye Bolt | Steel | Zinc/Clear | .365 x 4 1/2 x 2.75 3/4 | .365 x4.5 x2.75 3/4id lag eyebolt zp | 1,428 |
|
| KBS | TN | Blind Rivet | Aluminum | Plain | .362 x 3.37-3/4 | closed end hook.362 x3.37 x3/4 x5/8 | 500 |
|
| KBS | TN | Internal Type HO Retaining Ring | Steel | Plain | M36 | m36 int.retaining ring | 35 |
|
| KBS | TN | Machine Taps | Steel | M36-4.00 | m36-4.0 hi speed stl plug tap | 1 |
| |
| KBS | TN | F436 Round Structural Washer | Grade 8 | Zinc/Yellow | 1/4 | 1/4 f436 sae extra thk gr 8 flat/w yellowznc b18.2.6 | 5,447 |
|
| MMF | MI | Hex Head Cap Screw | Ni-Cu Alloy (Monel, K-Monel, etc.) | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 7/16-14 x 2 1/4 | 7/16-14 x 2-1/4 hhcs mil-dtl-1222j ty 1 gr 500 k500 usa m1222rn7c236ncnn b18.2.1 | 2 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
