FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| SunPack | FL | Gaskets | 8 | # 1/8 teadit 1001 non-asbestos ring gasket | 1 |
| ||
| Cal Fastenrs | CA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | 568-112 1/2 x 3/32 | 568-112 1/2 id x 3/32 thick o-ring buna 70 | 1,375 |
| |
| Cal Fastenrs | CA | Flat Washer | Plastic | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | .376 x .625 x .015 | flat teflon | 4,200 |
|
| Cal Fastenrs | CA | Panel Nut | Steel | Zinc/Clear | #10-32 | u-nut .60 - .70 panel range | 2,300 |
|
| Cal Fastenrs | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .143 x .267 x .032 | s.s f/w see nas620-c6 | 3,705 |
|
| Cal Fastenrs | CA | Carriage Bolt | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | c/b Cr3+ | 400 |
|
| Cal Fastenrs | CA | Machine Screw | Grade 5 | Zinc/Clear | 1/4-20 x 5/8 | unslotted hwh m/s w/ serrations -trivalant | 6,099 |
|
| Cal Fastenrs | CA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 1 1/2 | hex c/s , cr3 | 1,685 |
|
| Cal Fastenrs | CA | Carriage Bolt | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | c/b Cr3+ | 991 |
|
| Cal Fastenrs | CA | Fender Washer | Steel | Zinc/Clear | 3/8 x 1 1/2 | fender - Cr3+ | 840 |
|
| Cal Fastenrs | CA | Machine Screw | Steel | Zinc/Yellow | #6-32 x 1 1/4 | slotted binder m/s - yellow | 4,000 |
|
| Cal Fastenrs | CA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-16 x 4 1/2 | hex c/s | 35 |
|
| Cal Fastenrs | CA | Bonded EPDM Sealing Washer | Steel | Plain | #8 | seal 5/8 od w/ metal backing | 955 |
|
| Cal Fastenrs | CA | Set Screw (Socket Head) | Steel | Black Oxide | M2-0.40 x 2.5 | M2-.4 x 2.5 socket set flat pt 45h | 170 |
|
| Cal Fastenrs | CA | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Zinc/Clear | M5-0.80 x 12 | M5-.8 x 12 torx button tamper resistant cap - / Cr3+ & wax | 3,319 |
|
| AIH | AZ | Machine Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #6-32 x 5/16 | NAS1102E06-5 | 222 |
|
| AIH | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M4 x 6 | m4 x 6 pan head torx stl t/f/s zinc | 1930 |
|
| MESAFAST | CA | Slotted Round Nut (Shaft Nut) | Steel | Zinc/Black | 1/4-20 | 1/4-20 spanner nut diecast zinc black oxide | 6.0 |
|
| MESAFAST | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-15 x 3/4 | #8-15x3/4 square pan tapping type-a 18-8 s/s | 200.0 |
|
| MESAFAST | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-24 x 5/8 | 10-24x5/8 phil flat undercut tcs type-f 410 stainless | 200.0 |
|
| MESAFAST | CA | Dowel Pin | Steel | Plain | M6 x 36 | M6x36 dowel pin alloy hardened din 6325 | 68.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 1/4-20 x 1 | 1/4-20x1 hex cap screw gr2 steel hot dip galvanized | 85.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #8 x 1 1/4 | #8x1-1/4 torx flat particle board type-17 w/nibs steel yellow zinc t-20 drive (184/#) | 16.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #8 x 1 3/4 | #8x1-3/4 6-lobe flat particle board type-17 steel yellow zinc t-20 drive (143/#) | 5.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 3/4-10 x 2 3/4 | 3/4-10x2-3/4 hex cap screw gr2 steel hot dip galvanized | 46.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #9 x 3 | #9x3 6-lobe flat particle board type-17 t-20 steel yellow zinc (72/#) | 4.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/2-13 x 9 | 1/2-13x9 hex cap screw gr2 steel zinc | 35.0 |
|
| MESAFAST | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #5 x 1/2 | #5x1/2 phil pan tapping type-a steel zinc | 8,100.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade A | Zinc/Clear | 1-8 x 14 | 1-8x14 hex cap screw a307 steel zinc | 4.0 |
|
| MESAFAST | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10-16 x 2 1/2 | #10-16x2-1/2 phil mod truss self-drilling steel zinc | 100.0 |
|
| MESAFAST | CA | Split Lock Washer | Steel | Galvanized | 1 | 1 med split lock steel hot dip galvanized | 45.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 12 | M8-1.25x12 hex cap screw 10.9 zinc din 933 | 20.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M10-1.50 x 20 | M10-1.50x20 hex cap screw 10.9 steel zinc din 933 | 30.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 8 | Plain | 1-8 x 2 | 1-8x2 hex cap screw gr8 steel plain | 61.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M8-1.25 x 35 | M8-1.25x35 hex cap screw 8.8 steel zinc | 62.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M6-1.00 x 35 | M6-1.00x35 hex cap screw 10.9 steel yellow zinc | 388.0 |
|
| MESAFAST | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Black | 1/4-20 x 3/4 | 1/4-20x3/4 hex flange bolt 7/16 af serrated gr5 black zinc | 63,981.0 |
|
| Catalina | AZ | Latches & Catches | 568-013 | o-ring 568-013 silcone red rev.r02 | 505,550 |
| ||
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 | # 1/8 teflon ring gasket | 18 |
| |
| MESAFAST | CA | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Zinc/Clear | 1/2 x 12 | 1/2x12 hwh titen threaded anchor steel zinc | 10.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 5/8-11 x 2 | 5/8-11x2 hex cap screw gr2 steel hot dip galvanized | 20.0 |
|
| MESAFAST | CA | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/2-6 | 1 1/2-6 2h heavy hex nut a194 steel hot dip galvanized | 200.0 |
|
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1-8 x 4 1/2 | 1-8x4-1/2 heavy hex bolt a325 type-1 hdg usa | 110.0 |
|
| MESAFAST | CA | Round Malleable Washer (Timber Washer) | Iron | Galvanized | 1 1/8 | 1-1/8 square malleable bevel steel cast iron galvanized | 10.0 |
|
| MESAFAST | CA | F436 Round Structural Washer | Steel | Galvanized | 1 1/8 | 1-1/8 sae f436 flat hardened steel hot dip galvanized | 21.0 |
|
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1 1/8-7 x 3 3/4 | 1 1/8-7x3-3/4 heavy hex bolt a325 steel hot dip galvanized | 21.0 |
|
| MESAFAST | CA | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/8-7 | 1 1/8-7 2h a194 2h heavy hex nut steel hot dip galvanized | 19.0 |
|
| SunPack | FL | Gaskets | 3 1/2 | # 1/8 teadit 1001 non-asbestos ring gasket | 34 |
| ||
| SunPack | FL | Gaskets | 4 | # 1/16 garlock 3200 ring gasket | 2 |
| ||
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #9 x 3 | #9x3 6-lobe flat particle board type-17 t-20 steel yellow zinc | 5,415.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #8 x 1 3/4 | #8x1-3/4 6-lobe flat particle board type-17 steel yellow zinc t-20 drive | 2,860.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M6-1.00 x 20 | M6-1.00x20 hex cap screw 10.9 zinc din 933 | 4.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 20 | M8-1.25x20 hex cap screw a2 18-8 304 din 933 | 200.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 3/4-10 x 5 1/2 | 3/4-10x5-1/2 hex cap screw gr2 hot dipped galvanized | 20.0 |
|
| MESAFAST | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | t-handle slip-release torque wrench 1/4 sq drive preset to 80 inch lbs | 5.0 |
| |||
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1-8 x 4 1/2 | 1-8x4-1/2 heavy hex bolt a325 type-1 hdg usa | 101.0 |
|
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 5/8-11 x 2 1/4 | 5/8-11x2-1/4 heavy hex bolt a325 steel hdg | 135.0 |
|
| SunPack | FL | Gaskets | 2 | # 1/8 gortex full face gasket | 8 |
| ||
| SunPack | FL | Gaskets | 5 | # 1/8 garlock-gylon 3510 off white ring gasket | 4 |
| ||
| SunPack | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-9 | 304 ss fin hex nut domestic | 4 |
|
| SunPack | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 | 304 ss nylon insert lock nut | 22 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-9 x 4 | 304 ss fin h/b domestic | 12 |
|
| SunPack | FL | SAE Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 | 304 ss SAE flat | 28 |
|
| SunPack | FL | Hex Machine Bolt | Grade A | Zinc/Clear | 1 1/4-7 x 9 | a307a fin h/b | 4 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 1 1/2-6 x 4 1/2 | 1-1/2-6x4-1/2 a307b heavy h/b | 12 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 1-8 x 3 1/4 | a307b heavy h/b | 37 |
|
| SunPack | FL | SAE Flat Washer | 316, 317, A4 Stainless | Plain | 7/16 | 316 ss SAE flat | 25 |
|
| SunPack | FL | F436 Beveled Structural Washer | Steel | Plain | 1 | 1 f436 bevel | 20 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.50 x 35 | h/b din 933 | 25 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Galvanized | 3/4-10 x 3 1/2 | a193 b7 heavy h/b hdg | 9 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 5/8-11 x 1 3/4 | 5/8-11x1 3/4 a193 b7 heavy h/b -taiwan | 28 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 35 | h/b din 933 | 5 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 70 | h/b | 250 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M20-2.50 x 80 | h/b f/t din 933 | 22 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1-8 x 7 1/2 | o/a a193 b8m ss class 2 all thread stud | 4 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 1/2-13 x 1 1/2 | a193 b7 heavy h/b domestic | 7 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Zinc/Clear | 1 1/8-8 x 4 1/2 | a193 b7 hvy h/b | 11 |
|
| OneMonroe | MI | Self-Clinching Nut | 400 Stainless (405, 410,416,420,430 etc.) | Plain | M3-0.50 x 10 | pem alternative bso4-m3-10 captive cf4-bsom3-10 blind s/o 410 ss thread m3x0.5 / length-10 | 800 |
|
| OneMonroe | MI | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x .375 | pem alternative csos-632-6 captive cfcsos632-6 concealed head s/o ss thread-6-32 / length-.375 | 40 |
|
| OneMonroe | MI | Self-Clinching Nut | Steel | Plain | #4-40 | pem alternative fex-440 captive cfex440 miniture nut non-locking ss thread - 4-40 cfex440 M004402C | 525 |
|
| OneMonroe | MI | Self-Clinching Stud | Steel | Zinc/Clear | M6-1.00 x 8 | pem alternative fh-m6-8 captive chm6-8 self-clhing stud crs thread-m6x1.0 / length-8 | 900 |
|
| OneMonroe | MI | Self-Clinching Stud | Steel | Painted | 1/4-20 x 1.00 | pem alternative hfhb-0420-16 captive hchb420-16 high torque stud bronze plain thread-1 / 4-20 / length-1.00 | 300 |
|
| OneMonroe | MI | Self-Clinching Stud | Steel | Painted | 3/8-16 x 1.00 | pem alternative hfhb-0616-16 captive hchb616-16 high torque stud bronze plain thread-3 / 8-16 / length-1.00 | 200 |
|
| OneMonroe | MI | Self-Clinching Nut | Steel | Zinc/Clear | pem alternative sl-m3.5-2 captive sl-m3.5-2 self-locking/self-clhing nut thread m3.5-crs | 700 |
| |
| OneMonroe | MI | Self-Clinching Standoff | Steel | Zinc/Clear | M14 | pem alternative sss-4-14 captive cfsss4-14 spring top s/o crs panel #2 hole dia-4 / length -14 | 380 |
|
| OneMonroe | MI | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 6 | pem alternative fhls-m3-6 captive chesm3-6 self-clhing stud ss-thread-m3 / length-6 | 920 |
|
| OneMonroe | MI | Self-Clinching Standoff | Aluminum | Plain | #8-32 x .625 | pem alternative soa-832-20 captive cfsoa832-20 thru s/o alum thread-8-32 / length-.625 | 60 |
|
| OneMonroe | MI | Self-Clinching Standoff | Steel | Zinc/Clear | #4-40 x .625 | pem alternative so-6440-20 captive cfso6440-20 thru s/o crs thread-4-40 / length-.625 | 1000 |
|
| OneMonroe | MI | Self-Clinching Standoff | Steel | Zinc/Clear | #10-32 x .750 | pem alternative so-032-24 captive cfso1032-24 thru s/o crs thread-10-32 / length-.750 | 900 |
|
| ASFCORP | MI | restocking charge | 9,999,998 |
| ||||
| ASFCORP | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 butt hd soc cap screw ss pkg | 65 |
|
| ASFCORP | MI | carrier instruction booklet-40rm-24si | 3 |
| ||||
| ASFCORP | MI | icp #509 06 2601 02 | 81 |
| ||||
| ASFCORP | MI | aprilaire filter alum 14 5/8 x 19 5/8 1 thk | 72 |
| ||||
| ASFCORP | MI | tooling charge | 999 |
| ||||
| ASFCORP | MI | 3 in x 5 in x 2 mil poly resealable bag | 2,000 |
| ||||
| ASFCORP | MI | temperature sensor | 100 |
| ||||
| ASFCORP | MI | steel surcharge | 9,999,999 |
| ||||
| ASFCORP | MI | expediting charge | 9,999,996 |
| ||||
| ASFCORP | MI | Steel | 1/2 x 100 | 1/2 in x 100 ft flexible non-metallic liquid tight conduit black | 13 |
| ||
| ASFCORP | MI | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 1/4 | 1/4 in bore dia x 1/16 in grv wd x 7/16 in grv dia x 5/8 in od x 3/16 in thk blk rub grom | 7 |
|
| ASFCORP | MI | Steel | 1/4 | 1/4 in tip 1/2 in wide x 6-1/2 in lgth steel round tapered start punch | 1 |
| ||
| ASFCORP | MI | 187 series piggyback str receptacle non-insul | 55 |
| ||||
| ASFCORP | MI | Nylon (Polyamide) | Plain | M6.5 | m6.5 push pin 6/6 nylon black per blue print mio-6013 rev-1 | 67,200 |
| |
| ASFCORP | MI | 1/2 x 3/4 x 1 85d epdm setting block | 500 |
| ||||
| GUIDON | NJ | Flat Washer | Brass | Plain | #4 x .281 OD x .025 THK | 2,000 |
| |
| GUIDON | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 3/8 | slotted indented hex washer head type-a | 3,580 |
|
| GUIDON | TX | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 3/8 | slotted indented hex washer head type-a | 8,000 |
|
| GUIDON | NJ | Flat Washer | Brass | Nickel Plated | 1/4 ID x 11/16 OD x .051 | 1/4 L | 2,150 |
|
| GUIDON | NJ | Flat Washer | Brass | Plain | .228 ID x .562 OD x .040 THK | 12 L | 48 |
|
| GUIDON | NJ | Flat Washer | Brass | Plain | 1 1/2 ID x 3 1/2 OD x .156 THK | 3 |
| |
| GUIDON | NJ | Flat Washer | Brass | Plain | .281 ID x 3/4 OD x .062 THK | 16 L | 1,056 |
|
| GUIDON | NJ | Beveled Washer (Round & Square) | Steel | Plain | 3/4 | SQUARE BEVELED | 250 |
|
| GUIDON | NJ | Beveled Washer (Round & Square) | Steel | Plain | 7/8 | SQUARE BEVELED | 90 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 3,000 | EXTERNAL TOOTH COUNTERSUNK | 3,000 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #4 | EXTERNAL TOOTH | 30,735 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #5 | EXTERNAL TOOTH | 250 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #6 | EXTERNAL TOOTH COUNTERSUNK | 9,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | %236 | EXTERNAL TOOTH | 20,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #8 | EXTERNAL TOOTH COUNTERSUNK | 1,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #10 | EXTERNAL TOOTH COUNTERSUNK | 2,700 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #8 | EXTERNAL TOOTH | 5,030 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #10 | EXTERNAL TOOTH | 1,100 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1/4 | EXTERNAL TOOTH COUNTERSUNK | 4,000 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4 | EXTERNAL TOOTH | 1,000 |
|
| JFI | CA | Thumb Screw (Shoulder) | Steel | Zinc/Clear | 8-32 x 1/2 | shouldered thumb screw | 590 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
