FCH Member Advertisement
FCH News
3/4 Rivet Nuts
Internal Threaded Inserts, also known as Rivet Nuts, RivNut®, Blind Rivet Nuts, are internally threaded bushings that are inserted into a pre-drilled hole and then fixed in place by tightening a screw in the thread, thus expanding the body of the insert against the back side of the hole. The first rivet nut was created by BF Goodrich in the 1930s, and sold under the trademark RIVNUT®.
11 results, (click on any line for more information)
| Search Results Sponsored by The Olander Company, your source for Internal Threaded Inserts. For more results, visit www.olander.com | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Buy Rivet Nuts from one of our FCH Network Members | ||||||||
| Optimas | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4-16 x 1-1/16-12 | 3/4-16 x 1-1/16-12 x 1.380 oal male hex mounting insert steel per drawing rohs (i) | 121 |
|
| MidStates | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | 3/4 x 3 | precast anchor insert | 200 |
| |
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 4 1/4 | wedge anchors with hex nut and flat washer | 70 |
|
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 4 3/4 | wedge anchors with hex nut and flat washer | 60 |
|
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 5 1/2 | wedge anchors with hex nut and flat washer | 60 |
|
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 6 1/4 | wedge anchors with hex nut and flat washer | 50 |
|
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 7 | wedge anchors with hex nut and flat washer | 40 |
|
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 8 1/2 | wedge anchors with hex nut and flat washer | 40 |
|
| XL Screw | GA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 3/4 x 10 | wedge anchors with hex nut and flat washer | 30 |
|
| YANKEE | NH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-16 | 3/4-16 nylon insert lock-nut 18-8 stainless steel | 50 |
|
| OneMonroe | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | ASTM F1941-10 Fe/Zn-Ni | 3/4-10 | 3/4-10 thick wall rivet nut 1.375 longgrip -.125-.300 steel/zinc nickel | 9 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
