FCH Member Advertisement
FCH News
1/2 inch length Pipe Tees
Pipe Tees, or Pipe Tee Fittings are usually used to provide a right angle (or 90 degree) connection to a new run of pipe. The threads on each end of the Tee need not be the same: they can all be different or all the same, but the main purpose is to provide a 90 degree connection.
11 results, (click on any line for more information)
| Buy Pipe Tees from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| METRO IND | OH | Pipe Tee | Steel | Galvanized | 1 1/2 x 1/2 | reducing tee leg-last pt . | 11 |
|
| MidStates | MI | Pipe Tee | Steel | Plain | 3/4 x 1/2 | 3/4 x 1/2 steel reducing coupling | 184 |
|
| All Size | TX | Pipe Tee | Steel | Plain | 3/8 x 1/2 | 3/8 x 1/2 pipe run tee composite | 10 |
|
| All Size | TX | Pipe Tee | Steel | Plain | 1/2 x 1/2 | 1/2 x 1/2 pipe branch tee composite | 15 |
|
| All Size | TX | Pipe Tee | Steel | Plain | 3/8 x 1/2 | 3/8 x 1/2 pipe branch tee composite | 12 |
|
| All Size | TX | Pipe Tee | Steel | Plain | 1/4 x 1/2 | 1/4 x 1/2 pipe branch tee composite | 1 |
|
| All Size | TX | Pipe Tee | Steel | Nickel | 3/8t x 1/2 | 3/8t x 1/2mpt branch tee nickel plated | 10 |
|
| All Size | TX | Pipe Tee | Steel | Plain | 1/2t x 1/2 | 1/2t x 1/2 mpt dot comp male run tee | 3 |
|
| Wurth | IN | Pipe Tee | Iron | Zinc/Clear | 2 1/2 x 1/2 x 2 1/2 | 2 1/2 x 1/2 x 2 1/2 tee red mal iron 150 psi zinc trivalent clear | 19 |
|
| Valley Nu | WA | Pipe Tee | Brass | Plain | 1/2-t x 1/2 | -mpt SAE flr male run tee | 5 |
|
| Valley Nu | WA | Pipe Tee | Steel | Plain | 0.065 x 1/2 x 1/2 | square tube | 374 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
