FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 20 | slotted cheese head machine screw a2 m3-.50 x 20 din 84 | inquire |
|
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #7 x 1 1/4 | 7 x 1-1/4 torx trim deck screw type-17 305ss | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | M42 | flat washer a4 m42 din 125a | inquire |
|
| Brikksen | FL | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 | 5/16-18 x 2 weld bolt .775 od head ss head diameter .775 od (+.000/- | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3 1/2 | 10-32 x 3-1/2 phillips pan head m/s 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | 5000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 1/2 | #6 x 1/2 phillips pan head sms type-a bp 18-8 ss 100pk 100 per clam 5 clams per box-fasco brand | 90 |
|
| Brikksen | FL | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 | 8-32 x 1 flush head self clinching stud ss | inquire |
|
| Brikksen | FL | Split Lock Washer | Silicon Bronze | Plain | 5/16 | 5/16 lock washer silicon bronze 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 | split lock washer-100 per bag a2 (1.4310) m10 din 127b | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.50 x 180 | hex head cap screw partial thread m10-1.5 x 180 class 8.8 steel zinc din 931 | inquire |
|
| Brikksen | FL | Signs & Labels | 7/16x.031 | #10 flat washer 7/16 od .031 thick 18-8 ss-100 per bag heat sealed poly bag w/mmc label | inquire |
| ||
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-18 | 5/8-18 hex nut 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 8 x 1/2 | 8 x 1/2 phillips truss a ss | 31000 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M39 | flat washer a2 m39 din 125a | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 5 1/2 | 1/2-13 x 5-1/2 hex hd cs ss f593c | 12000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 120 | hex head cap screw partial thread a2 m10-1.5 x 120 din 931 | 100 |
|
| Brikksen | FL | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | M12-1.75 x 20 | socket set screw cone point a4 m12-1.75 x 20 din 914 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 | 10-24 x 2 slottedround m/s ss | 4000 |
|
| Brikksen | FL | Metal Drill Bits | Steel | 0.1405 | #28 jobber drill bit 135 deg split pt | inquire |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 1/2 | 1/4-20 x 1-1/2 phillips flat m/s ss/chrome plate- | 70000 |
|
| BEACON | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 5/16-18 x 2 1/2 | 5/16-18 x 2-1/2 6-lobe (t40) pan head type f thread cutting screw case hardened steel trivalent zinc & bake rohs compliant | 1000 |
|
| Century | FL | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 | 8-32 x 1 phillips truss m/s stl zinc | 300 |
|
| Century | FL | Self-Sealing Screw | Plain | parker 722031304 seal screw per print rev e | 10 |
| ||
| Century | FL | Solid Rivet | Plain | 2017-t4 | ms20426d6-7 | 125 |
| |
| Century | FL | Self-Tapping Thread Rolling Screw | Plain | ms51862-56c | 13 |
| ||
| Century | FL | Blind Rivet | Plain | 1/8 x .251-.312 | ms20601ad4w5 | 200 |
| |
| Century | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M24 x 55 | m24.0 x 55.0mm grade 8.8 zi hex cap screws full thread w/patch din 933 | 350 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Black Oxide | #4 x 3/8 | #4 x 3/8 phillips round hd-sh plastite steel black ox | 35000 |
|
| Century | FL | Storage Bins | akro-mils 30250-blue | 18 |
| |||
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Green | #8-32 x 3/8 | 8-32 x 3/8 slotted ind hex wash taptite stl zinc green | 6394 |
|
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Plain | 2-024 | parker n0674 2-024 parker n0674 2-024 o-ring | 2750 |
| |
| Century | FL | Solid Rivet | ms20470a3-3 | 19744 |
| |||
| SWACO | OH | Solid Rivet | Aluminum | Plain | 100 | solid rivet 100 precision head | 160 |
|
| SWACO | OH | Hex Machine Bolt | Grade A | Plain | 1/2-13 x 8 | 1/2-13x8 6 hx bolt a307 gr a low stl | 70 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 1/4-28 x 3/4 | 1/4-28 x 3/4 socket set cup point 316l stainless | 38 |
| |
| FasSpcMfg | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 1 1/4 | (revision c) 5/16 x 1-1/4 special pin no threads special cone point 304 stainless dimensions per drawing e-68530 rev c (less hole-no drilling) | 1 |
|
| Alma Bolt | MI | External Type SH Retaining Ring | Plain | 1/16 | 1 1/16 | ext retain ring sh | 94 |
| |
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | 1/2 x 1 1/2 | 1/2 x 1 1/2 | alloy dowel pin | 116 |
|
| Alma Bolt | MI | Hex Machine Bolt | Grade 2 | Zinc/Clear | 5/8-11 x 3 3/4 | 5/8-11 x 3 3/4 | hex hd bolt gr2 zp | 60 |
|
| Alma Bolt | MI | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8 x 1 1/4 (1/2-13) | 5/8 x 1 1/4 (1/2-13 thread) | st. st. stripper bolt | 3 |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 | 3/8-16 x 2 soc hd c/s 316 ss | inquire |
|
| OneMonroe | MA | Socket Head Cap Screw | Steel | Plain | 5/16-24 x 2 | 5/16-24 x 2 socket cap screw | 108 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/4 | 6-32 x 3/4 slottedround m/s plated | 8850 |
|
| American | WI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 7/8 | #10-24x7/8 nc phil flat hd m/s #18-8 ss | 10100 |
|
| Bossard | AZ | Flat Washer | Nylon (Polyamide) | Plain | flat nylon washer | 5000 |
| |
| Bossard | AZ | Machine Screw | Steel | Plain | screw phillips pan had | 2313 |
| |
| Bossard | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 3/16 phillips flat hd m/s s/s | 331 |
| |
| Bossard | AZ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | insert 1/2-13x1.5 dia non locking heli-coil heli-coil | 12718 |
| ||
| Bossard | AZ | Solid Rivet | Aluminum | Plain | rivet ms20426ad4-6 | 9827 |
| |
| Century | FL | Hex Head Cap Screw | Cadmium/Yellow | 5/16-24 x 3/4 | ms90726-32 | 1550 |
| |
| Empire | WA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-24 x 1 1/4 | 3/8-24 x 1-1/4 nf gr5 c/s zp | 100 |
|
| Empire | WA | Finished Hex Nut | Steel | Plain | 1/2-13 | 1/2-13 finished hex nuts | 2400 |
|
| Longhorn | TX | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 1/2-13 x 2 1/2 | 1/2-13 x 2-1/2 a325 structural bolt plain | 178 |
| |
| Longhorn | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-16 x 3 1/2 | 3/4-16 x 3-1/2 hex cap screw gr 5 z | 39 |
|
| Optimas | IL | Curved/Wave Spring Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 | #10 curved spring washer 301 ss .200x.370x.006 tmpi quick clean (sl) | 600 |
|
| Optimas | IL | Pipe Reducer | 316, 317, A4 Stainless | Zinc/Clear | 1/4 | 1/4 tubex1/8 tubex1.52lg straight reducing union 316ss .015orf etch sz (sl) | 40 |
|
| Raw Produ | NJ | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 1/4 | spanner pan head ms 304 ss #10-24 x 1-1/4 | 100 |
|
| Raw Produ | NJ | Cushioned Pipe & Tube Loop Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 12 | pipe clamps 304 ss 12 | 500 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | hex machine bolt class 8.8 zinc/yellow | 40 |
| |
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 20 | metric torx pan head ms a2 ss m6 x 1.0 x 20m | 72 |
|
| Raw Produ | NJ | Wedge Stud Anchor | Steel | Galvanized | 5/8-11 x 8 1/2 | wedge anchor hdg 5/8-11 x 8-1/2 | 500 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 1/4 | slotted pan head ms 304 ss #10-24 x 1-1/4 | 500 |
|
| Raw Produ | NJ | Machine Dies | Steel | hex dies hss 33e136c-9/16-12 unc | 2 |
| ||
| Coburn Myers Fastening Systems | PA | F436 Round Structural Washer | Steel | Plain | f436 round structural washer f436 plain | 486 |
| |
| Raw Produ | NJ | Blind Rivet | Aluminum | Black Oxide | 1/8 x .400 (.188-.250) | pop rivet aluminum black 4-4 1/8 x .400 rvt000156 | 29002 |
|
| Raw Produ | NJ | Eye Bolt | Steel | Zinc/Clear | 1/2-13 x 3 | eye bolts shld-zinc 1/2-13 x 3 | 200 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #12-11 x 1 1/4 | slotted hex washer head sms zinc type-a #12-11 x 1-1/4 | 2820 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Steel | Plain | #12 x 1 1/4 | metalgrip sell driller roofing screws-slottedate-#12 x 1-1/4 | 500 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/2 | phillips flat head ms 304 ss #2-56 x 1/2 | 1646 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 | hex cap screws 304 ss 3/8-16 x 3 | 1490 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Steel | Plain | #10-16 x 1 1/2 | hex head roofing screws #10-16 x 1-1/2 | 7316 |
|
| Raw Produ | NJ | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/4 | phillips pan head ms zinc #6-32 x 3/4 | 6523 |
|
| QCS | OR | Socket Head Cap Screw | ASTM A574 | Plain | 7/16-14 x 3/4 | 7/16-14x3/4 soc cap screw alloy | 100 |
|
| QCS | OR | Flat Head Socket Cap Screw | Steel | Plain | #8-32 x 1 | 8-32x1 flat soc cap screw alloy | 2975 |
|
| AEROSPCE | MN | Hex Male/Female Standoff | Steel | Plain | 1/8 | 1/8 hex m/f standoff with patch | 250 |
|
| AEROSPCE | MN | so-032-4zi pem .125longref#nas1129-3-4z thru-hole | 49 |
| ||||
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Cadmium | #6-32 | ms21209c0615p 6-32 1-1/2dia selflock 304ss cadmium | 3700 |
|
| AEROSPCE | MN | Self-Clinching Standoff | Steel | Plain | bsos-440-16 .500long pem blindsee-07 standoff | 5350 |
| |
| Fastener | OH | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 20 | hex head cap screw m12-1.75x20 class 10.9 plain | 32 |
|
| Fastener | OH | Hex Tap Bolt (Fully Threaded) | Grade A | Plain | 1/2-13 x 2 | hex tap bolt 1/2-13x2 a307 plain | 150 |
|
| Fastener | OH | Machine Taps | Steel | 4-40 | tap spiral point 4-40 | | 12 |
| |
| Wurth Ind | IN | Cable Clamps & Ties | Plastic | Plain | M2.5 x 200 | cable tie plalatch nat 2.5x200mm plastic | 16930 |
|
| Century | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M20 | m20 nylon insert locknut 18.8 (rev-) din 985 | 94 |
|
| National | Ont | Split Lock Washer | Steel | Zinc/Clear | 3/8 | 3/8 split lockwasher sz | 500 |
|
| WINA | MN | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 3/4 | phillips flat 82 countersunk head type-f thread cutting screw st zn ph 1/4-20x3/4 | 6424 |
|
| WINA | MN | External Type E Retaining Ring (E-Clip) | Steel | Plain | 1 1/2 | internal retaining ring type-na2 st phr 1 1/2 rotor clip | 1329 |
|
| WINA | MN | Socket Head Cap Screw | Class 12.9 | Non-Electrolytic Zinc & Aluminum Flakes + Matrix | M10 x 35 | socket head cap screw 12.9 hs8 zfshr m10x35 iso 4762 | 10521 |
|
| Mansco | MI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10-24x1 pan phil type-f metal tc scr 18-8 s/s | 4400 |
| |
| Hodell | OH | Machine Screw | Steel | Zinc/Clear | #10-32 x 1/2 | 10-32x1/2 phil round ms trivalent zinc | 2000 |
|
| Fastener | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M3-0.50 x 6 | button head torx socket screw m3-.5x6 18.8 ss black oxide | 100 |
|
| Mansco | MI | Flat Head Socket Cap Screw | Class 10.9 | Zinc/Black | m6-1.0 x 30mm flat hd soc cap scr cl10.9 triv blk znc | 12848 |
| |
| AFI | FL | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | 1/4-20x1/2 cd flange weld stud ss () | 3614 |
|
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 3/8 | 1-72x3/8 phil pan ms ss () () | 8500 |
|
| AFI | FL | silicone pull plug 600o () | 4000 |
| ||||
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 x 18 | m4x18 phil pan ms ss din 7985a () | 755 |
|
| AFI | FL | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 center lock nut st zn () () | 6250 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #10-32 x 3/4 | 10-32x3/4 hex wash hd ms st zn rohs () () | 2720 |
|
| AFI | FL | Curved/Wave Spring Washer | Steel | Plain | wave shape spring washer () | 2400 |
| |
| Olander | CA | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 7/8 x 3/16 hex m/f standoff sst rohs | 6 |
| |
| Olander | CA | Handles | Brass | Chrome Plated | 1/4 rd x 4 l x 1 h handle brass chrome | 1 |
| |
| Olander | CA | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 1/2 (1/4-20) | 5/16 x 1/2 shoulder bolt sst | 99 |
|
| Olander | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 8-32 x 3/8 slot flat t-f stl zn non-rohs | 66 |
| |
| Olander | CA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4-12 hx nut sst rohs | 1 |
| |
| Olander | CA | Set Screw (Socket Head) | Steel | Plain | 1/4-28 x 3/8 soc set cone pt alloy | 52 |
| |
| Olander | CA | Flat Washer | Steel | Plain | .187 x 6 | 6 x .187 od x .125 thk f/w nyl () () | 1853 |
|
| Mansco | MI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/2 | flat phil m/s 18-8 s/s w/nylon patch | 3000 |
|
| Century | NY | aa52081-c-3-blk lacing tape lace fin c sz 3 blk ( 500 yd per roll) | 2 |
| ||||
| Century | NY | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | m5.0 x 50.0 grd 8.8 zi plt | 300 |
| |
| Century | NY | Set Screw (Socket Head) | Steel | Plain | 1/4-20 x 1/4 hex socket set screw cup pt alloy stl | 175 |
| |
| Century | NY | na0276m8l15d | 380 |
| ||||
| Century | NY | cherry cr2672-3-04 | 90 |
| ||||
| Century | NY | Sems Machine Screw | Steel | Plain | 6-32 x 1/2 phil pan hd ext l/w steel hex. chrom. free | 1500 |
| |
| Century | NY | Thumb Screw (Plain) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 618e006-202 thumb screw thumb screw per print rev b stainless steel | 8 |
| |
| Century | NY | Cushioned Pipe & Tube Loop Clamp | umpco s156wcg7 clamp loop type-cushioned 7/16in | 80 |
| |||
| Century | NY | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M3 x 16.0 | m 3.0x16.0 grd 12.9 socket hd cap screws zinc plated din 912 | 44900 |
|
| Century | NY | Self-Clinching Nut | Steel | Zinc/Clear | 1/4-20 | pem s-0420-3 s-0420-3 | 10000 |
|
| Century | NY | Springs (Extension) | century spring 80061s/dfars spc-129106 extension spring | 990 |
| |||
| Century | NY | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Plain | an505c4r22 bag qty=25 | 175 |
| |
| Century | NY | cherry cr3223pr-4-06 | 2900 |
| ||||
| Century | NY | Hex Head Cap Screw | Plain | ms35307-368 | 250 |
| ||
| Century | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6-32 x 1/2 phillips 100dg flat hd 18-8 | 2220 |
| |
| Century | NY | cherry cr4172pr-6-04 | 34 |
| ||||
| Century | NY | Finished Hex Nut | Brass | Plain | m 3.0 brass hex nuts | 297 |
| |
| Century | NY | Panel Nut | ms3116f16-26p | 4 |
| |||
| Century | NY | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | nas1130-4fl15 | 23 |
| ||
| Century | NY | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | pem hfhs-m6-25 heavy flush hd stud stnlss hchsm6-25 hfhs-m6-25 | 170 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M2.5-0.45 | m2.5-.45 f/r tangless kato ins () | 3410 |
| ||
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #8-15 x 1 7/8 | #8-15 x 1-7/8 self-piercing screws, modified truss head phillips , twin lead, full thread, sharp point, steel zinc pltd, head painted white | 4,450 |
|
| Scrooscoop | CA | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Painted | 1/8 | #43 blind open type rivet 18-8 304 rivet 18-8 304 mandrel painted brandywine button head diamond point grip range (.126-.187) diameter 1/8 length .337 | 43,898 |
|
| Rapid | NY | Blind Rivet | Steel | Black Oxide | 3/16 x .562-.625 | dome hd blind-steel/steel-black oxide 3/16x.562-.625 grip | 373 |
|
| Rapid | NY | Semi-Tubular Rivet | Brass | Plain | .089 x 9/32 | oval head brass semi-tubular .089x9/32 plain finish | 11800 |
|
| Rapid | NY | Semi-Tubular Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 281 | oval head monel semi-tubular i/a/w rev 1 .123 x 1/4 per qq-n-281 MS16535-176 | 31070 |
|
| Rapid | NY | Solid Rivet | Brass | Plain | 3/32 x 7/16 | 90 degree countersink brass 3/32x7/16 | 14.6029 |
|
| Rapid | NY | Semi-Tubular Rivet | Aluminum | Zinc/Clear | .061 x 5/16 | oval head 5056-h32 alum.semi-tub.i/a/w rev 1 .061 x 5/16 plated per spec. MS16535A28 | 74100 |
|
| Rapid | NY | Solid Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 281 | 100countersink flush shear monel rev.bh 1/8x15/32 per qq-n-281 | 20.9453 |
|
| Rapid | NY | Semi-Tubular Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .244/.252 x 5/16-.500 | truss head 300 18-8 304 steel semi-tubular .244/.252x5/16x.500 head diam. | 395 |
|
| Rapid | NY | Blind Rivet | Steel | Plain | 3/16 x .876 | 100deg. countersink hi-shear close-tolerance 3/16 x .876-.938 grip i/a/w rev 6 alloy steel NAS525-6-15 | 389 |
|
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #6-32 | countersink hd stain.rivet-nut closed end rev 12 6-32 thread x .106-.161 grip 304ss NAS1330C06B161 | 8 |
|
| Rapid | NY | Semi-Tubular Rivet | Aluminum | Plain | .061 x 5/8 | oval head 5056-h32 alum. semi-tubular .061x5/8 plain finish | 48775 |
|
| Rapid | NY | Drive Pin Rivet, Pin Grip Rivet | Aluminum | Plain | M. x .266-.359 | universal head drive rivet alum body/alum pin 1/4 diam.x.266-.359 grip (0.469 long) | 30570 |
|
| Delta | TX | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/2 | c/s 18-8 sst | 603 |
|
| FTS | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 | 304 ss | 1000 |
|
| Hodell | OH | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 7/16 | 7/16 internalxspl tlw 410 stainless alt 1722-01-00-4102 | 5000 |
|
| Hodell | OH | Hose/Tubing Connectors & Fittings | Brass | Plain | M6 | 6 tubex1/4 male br st compr fittingstraight | 15 |
|
| Hodell | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 3/4 | 12-24x3/4 phil flat m/s 18-8 sst | 225 |
|
| Hodell | OH | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 5/8-11 x 3 3 | 5/8-11x3 1/2(1/1) 3 3/4(e/e) a193 b16all thread studw/2 a194 grade 7 heavy hex nuts assembled plain | 12 |
|
| Arden | WI | Machine Screw | Steel | Zinc/Clear | #8-32 x 1/4 | 832x1/4 torx pn ms zc | inquire |
|
| Arden | WI | Flat Washer | Steel | Zinc/Clear | .343 x 1.25 x .134 | .343x1.25 x.134 fw zc | inquire |
|
| Arden | WI | Flat Head Socket Cap Screw | Steel | Black Oxide | 1220 x 1 3/4 | 1220x1 3/4 hxsoc flat cs blk | inquire |
|
| THRDFAST | OK | 12 Point Flange Screw (CounterBore) | Steel | Plain | 3/4 | nf-16x3 12 pt counterbore screw b18.2.1 | 110 |
|
| THRDFAST | MS | Machine Screw | Steel | Zinc/Clear | #10-24 x 2 1/2 | slotted round m/s b18.6.3 | 69 |
|
| Valley Nu | WA | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 1/2-20 x 2 1/2 | nf pfc-9 hex c/s zy | 34 |
|
| Valley Nu | WA | Socket Head Cap Screw | Class 12.9 | Plain | M30-3.50 x 240 | gr12.9 socket hd c/s pl | 3 |
|
| Valley Nu | WA | Hex Head Cap Screw | Grade 5 | Plain | 3/4-16 x 2 3/4 | nf gr5 hex c/s pl usa | 165 |
|
| Valley Nu | WA | Lock Nut, Nylon Insert | Grade 8 | Zinc/Yellow | 3/4-16 | nf gr8 nylon insert lock nut zy | 151 |
|
| Valley Nu | WA | Electrical Lugs & Terminals | Nylon (Polyamide) | Plain | 16-14 | awg ins fem quick connect | 86 |
|
| Valley Nu | WA | Machine Screw | Steel | Zinc/Black | #8-32 x 5/8 | nc pan slotted zb | 396 |
|
| Lightning | LA | Wedge Stud Anchor | Steel | Zinc/Clear | 3/4-10 x 4 3/4 | wedge anchor (20/bx) | 647 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
