FCH Member Advertisement
FCH News
| Buy End Mills from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/32 x 1/8 | 3/32x1/8 ca 4f reg spect bn | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/32 x 1/8 | 3/32x1/8 ca 4f reg s-cc-fb | 5 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/16 x 3/8 | 3/16 x 3/16 x 3/8 x 2 ca 3f zrn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/16 | 3/16x3/16 ca 4f reg s-cc-f | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 1/4 | s/e corner rnd end mill | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 7/32 x 1/4 | 7/32x1/4 ca 4f reg spector | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 7/32 x 1/4 | 7/32x1/4 ca 4f reg s-cc-f | 2 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 4 flute single end carbide end mill | 3 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | end mill double end 2 flute | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 9/32 x 3/8 | 9/32 x 3/8 2 flute end mill | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 13/32 x 3/8 | 13/32 x 3/8 2 flute end mill | 1 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/8 | 3/16 x 3/8 end mill 2 flute | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 ca 6f reg ticn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 ant ca 4f s-cc-f | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/8 | 3/16x3/8 hs 4f reg d-nc-f | 21 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 co 4f s-cc-r | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 co 3f reg hh s-cc-r | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 co 4f lon s- | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 co 4f lon s-cc-r | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 ca 4f reg s-cc-fb | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 11/32 x 3/8 | 11/32x3/8 ca 2f reg s-cc-f | 1 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 x 2 1/2 | oal 4 fl square end carbide end mill 1/box | 10 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 x 3/4 | 3/8x3/8x3/4 hss 2-flute single end mill weldon tool | 11 |
| ||
| Hayes | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8 x 3/8 dble end center end mill hss | 2 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 x 4 | oal 4fl square carbide end mill 1/box | 2 |
| ||
| ISSCO | MO | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 9/32 x 9/16 x 3 1/8 | end mill two flute center cut high speed steel double end center cut 9/32 x 9/16 flute x 3 1/8 oal | 5 |
|
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 5/8 x 1 5/8 | cobalt multi-flute roughing end mill 1/box | 2 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 5 1/4 | roughing endmill# 714a148l | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 5 1/4 | s.e. 4 fl endmill# 525a148d | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 3 | 3/4 x 3/4 x 3 (6 long) carbide end mill se 4fl altin domestic | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/4 | 3/8x3/4 co 4f reg s- | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 | 3/4 x 3/4 hss end mill multi flute | 7 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 | 3/4 x 3/4 hs 2 flute | 5 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 1 1/2 | 3/4x3/4x1 1/2 carbide bright finish 4-flute centered single end mill yg-1 tool | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 2 1/2 | cobalt multi-flute roughing end mill 1/box | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 | h.s. 4 flute single end endmill 1/box | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 6 1/4 | h.s. 4 flute single end endmill 1/box | 3 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 1 3/4 x 1 | 1-3/4x1 indexable end mill (tri-dex) | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 1 3/4 | cat40 ad/b end mill holder 3/4x1-3/4 | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 2 | 3/8 2 flute reg. length 45deg. helix sq end carb.end mil zrn ctd | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 2 | 3/4 ca 2f 1 loc 3 oal | 6 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/32 x 2 | 1/32 ca 2f reg | 2 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | 1/2-13 x 2 | double end mill stud | 100 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Zinc/Clear | 1/2-13 x 2 | double end mill stud stud | 20 |
|
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 543 x 20 | tnmg 543 g pt20c | 7 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/2-13 x 2 1/4 | double end mill stud 18-8 304 | 10 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3 | 3/16 ca 3f reg tin s-cc-f | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3 | 3/8 ca 3f reg enduro accele | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3 | 3/4 ca 3f 1-3/4 loc 4 oal sq | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3 | 3/8 ca 3f alu-power ticn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3 | 3/8 ca 3f 5/8 loc 2-1/2 oal zrn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3 | 3/4 ca 3f 2-1/2 loc 5 oal 30d helix coated | 2 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 3/8-16 x 3 | double end mill stud stud | 300 |
|
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 4 | 3/16 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 4 | 3/8 4 flute reg. length 30deg.helix carb.end mil | 1 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 4 | 3/8 4fl crb end mill | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/32 x 4 | 3/32 ca 4f stb s-cc-f | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 4 | 3/8 ca 4f reg s-cc-f specto | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 4t3 x 7 | snmg 643a-4t s3x7 | 30 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 532 x 757 | oect 532 sw757 | 30 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 634 x 826 | spu 634 826 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 434 x 826 | sngn 434 826 | 30 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 431 x 826 | tpg 431 826 | 19 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/32 | 3/32 2-flt reg lgth sq-end 30deg helix end mill | 2 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 5/32 | 5/32 2 flute reg lgth sq-end 30 deg helix end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | 3/16 2-flt reg lgth sq-end 30 deg helix end mill | 4 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/32 | 3/32 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/32 | 5/32 4 flute reg. length 30deg.helix carb.end mill | | 2 |
| |
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | Steel | 3/16 | 3/16 2 flute reg. length 45deg.helix carb.end mil | | 1 |
| |
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | Steel | 3/16 | 3/16 2 flute reg. length sq end 45deg.helix carb.end mil zrn ctd | 3 |
| |
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | end mill 2 flute 3/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | end mill 3 flute 3/8 square | 2 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | cyl end cut fast mill 3/4lof | 2 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Titanium | 9/32 | endmill 4 fl ctr cut se carbonitrite | 1 |
| |
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | de 4 fl center cut endmill | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 3/8 | aluma endmill sq 3 flute single end | 1 |
| |
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 98 3/8 | 98193 3/8 2 flute spoon cutter endmill zrn | 7 |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13 | single end mill din 327ba hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13.5 | single end mill din 327ba hss xs | 1 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13 | end mill din 327bm hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M3 | end mill din 844m hss xs | 21 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M3.5 | end mill din 844m hss xs | 15 |
|
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 11/32 | sq end cen cut 2fl sol carb end mi | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | cen cut dbl end 4fl m42 end mill | 1 |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 3/8 | se 4fl hss roughing end mill tin | - |
|
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 5/8 2 | -flute s/e c/c end mill | 4 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 2 | -flute d/e c/c end mill | 5 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 7/32 x 1/4 4 | -flute s/e carbide end mill | 1 |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M3 | single end mill hss xs | 2 |
|
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 | ccmt 432a-73 nl300 (120408) | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 | ccmt 09t304a-73 nl300 (32.51) | 90 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 | cnmg 543a-4t nl300 | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 | wnmg432a-2n nl300 | 17 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 432 | cnmg 432 ss ph6215 | 6 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 431 | cnmg 431 ss ph 5125 | 10 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6325 | ccmt 21.51 fm ph6325 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | 3/8 hss 2f | 5 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 | wave mill indexable end mill 3/4 | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/32 x 1/8 3/8 | 3/32x1/8 shank 3/8 loc ca 4f reg tialn cc | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | .030 | cobra e 9/16 ca 4f rad.030 | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 | tnma 222 pc-300 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M9235 | cnmg 432-nm 9235 | 26 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 12-3 | s-sclcr 12-3 | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 100-3 | segr 100-3 | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 433 | tpu 433 6640 | 40 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6630 | cnmg 432-wm 6630 | 8 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M8030 | wcmt 06t308-um 8030 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6630 | snmg 644-m 6630 | 75 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6630 | cnmg 433-m 6630 (new grade 9230) | 40 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | 3/16 se 2fl end mill s/c microgain | 7 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 3 | 3 flute 35 deg helix end mills for alum 3/8x3/8x1 1/2 | 1 |
| |
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 7/32 | 7/32 4fl sq end mill sgs 36410 | 16 |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3.5 | m3.5mm single end mill din 327ba hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3 | m3mm single end mill din 27ba | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M36 | m36mm single end mill din 327ba hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3.5 | m3.5mm 2 flute end mill din 327bc | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3 | m3mm 2 flute end mill din 27bc | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3 | m3mm end mill din 27bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3.5 | m3.5mm end mill din 844c | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M30 | m30mm end mill din 844m hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M35 | m35mm end mill din 844m hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M32 | m32mm end mill din 844m hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M38 | m38mm end mill din 844m hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3 | m3mm end mill din 844m | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M23 | m23mm end mill din 327bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M30 | m30mm end mill din 327bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M35 | m35mm end mill din 327bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M36 | m36mm end mill din 327bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M34 | m34mm end mill din 327bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3 | m3mm end mill din 27bm | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M38 | m38mm end mill din 327bm hss | inquire |
| ||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M3 | m3mm double end mill din 27b2 hss | inquire |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
