FCH Member Advertisement
FCH News
1/4 End Mills
45 results, (click on any line for more information)
| Buy End Mills from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 4 flute single end carbide end mill | 7 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 x 1 1/2 | 1/4 x 1/4 x 1 1/2 carbide end mill se 4fl | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 ca 6f reg ticn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/4 x 1/4 x 3/8 3 | 1/4 x 1/4 x 3/8 3fl 21/2 oal alum | 65 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 ca 4f xl tialn cc | 6 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 x 3/4 | 1/4x1/4x3/4 general purpose centered 4-flute single end mill tiain coated(c430-.0.250-d3-s.0-z4) | 7 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | flute sqr end solid carbide end mill 1/box | 14 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | end mill double end 2 flute | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 x 3/8 end mill 2 flute | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4x3/8 co 4f reg s-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4x3/8 ca 4f reg d-cc-f | 3 |
| ||
| IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 x 5/8 | 1/4x3/8x5/8 general purpose non-center 4-flute single end mill niagara cutter | 13 |
| ||
| Hayes | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 x 3/8 dble end 4-flute end mill | 3 |
| ||
| Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 dia x 3/8 shank hss double end 3 flute cc end mill | 1 |
| ||
| Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 dia x 3/8 shank hss single end 3 flute cc end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 x 1 1/4 | 1 1/4 x 1 1/4 4 flute s/e c/c end mill | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2 flute reg. length 45deg. helix carb.end mil | 1 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2fl crb end mill | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 ca 2f reg de | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f reg tin | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 3/4loc zrn w/flat | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 45d helix yg | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 1-1/4 loc 3 oal zrn coated | 25 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 3/8 loc 2-1/2 oal | 65 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 1 loc zrn w/flat | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 4 flute reg. length 30deg.helix carb.end mil | 5 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 ca 4f reg rghr wf tin | 1 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | fl square carbide end mill 1/box | 2 |
| ||
| Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 x 1/4 | 1/4 dia x 4 x 1/4 shank hss (shxl-4-8) long reach 4 flute solid carbide end mill | 1 |
| ||
| B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 2 flute | 11 |
| ||
| B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 4 flute | 5 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 2 flute 1/4 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 3 flute 1/4 square | 2 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | de 4fl center cut endmill | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/4 | aluma endmill sq 3 flute single end | 1 |
| |
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | flute de end mill 72214 72214 | 2 |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | single end 4fl sol carb end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | sq end cen cut 2fl sol carb end mill | - |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 x 3/4 2 | -flute s/e c/c end mill | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 | 1-1/4 hs 2f reg | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 hs 2f 3/8 shank | 5 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | dia ball end end mill, 2 fl. cc | 1 |
| ||
| THRDFAST | MS | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | double end mill | 12 |
| ||
| THRDFAST | MS | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | single end mill 4fl carbide | 2 |
| ||
| THRDFAST | MS | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | single end mill 2fl carbide | 12 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
