1 Countersink Cutters
A Countersink Cutter, or Countersink Bit is used to cut or enlarge a conical edge to a pre-drilled hole, usually in metal. A fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
122 results, (click on any line for more information)
Buy Countersink Cutters from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
THRDFAST | FL | Countersink Cutters | 5 7/16 x 3/16 x 2 3/4 | combined drill & countersink bit | 3 |
| ||
All Size | TX | Countersink Cutters | 1/2 x 1/4 | 1/2 x 1/4 82 degree countersink single flute keo | 12 |
| ||
All Size | TX | Countersink Cutters | 1/4 x 1/4 | 1/4 x 1/4 82 degree countersink single flute | 12 |
| ||
Komar | AR | Countersink Cutters | Steel | 1/2 dia countersink bit w/1/4 shank | 2 |
| ||
Wurth | IN | Countersink Cutters | 1 3/8 x 1/4 | 1 ea 3/8 x 1/4 hss 82deg 3fl countersink std pack1 | 50 |
| ||
Set Screw | IL | Countersink Cutters | Steel | #10-32 x .320 5n plier bolt not hard | inquire |
| ||
QFC | TX | Countersink Cutters | 1/8 x 5/16 x 4 | 1/8x5/16x4 drill/countersink | 3 |
| ||
All Size | TX | Countersink Cutters | 1/2 x 3/8 | 1/2 x 3/8 82 degree countersink 3 flute | 5 |
| ||
Bostwick | IN | Countersink Cutters | 1/2 x 3/8 | 1/2 x 3/8 82 deg 3 flute countersink | 3 |
| ||
All Size | TX | Countersink Cutters | 1 x 1/2 | 1 x 1/2 82 degree countersink 6 flute | 1 |
| ||
All Size | TX | Countersink Cutters | 1 x 1/2 | 1 x 1/2 90 degree countersink single flute keo | 10 |
| ||
All Size | TX | Countersink Cutters | 1 1/4 x 1/2 | 1 1/4 x 1/2 countersink single flute 90 degree | 3 |
| ||
IPC | VA | Countersink Cutters | 1 x 1/2 | 1 diax1/2 shank 82 hss sincle flute countersink bit | 7 |
| ||
Century | NY | Countersink Cutters | Steel | Zinc/Clear | 1/2-13 x 5/8 bolt zinc | 50 |
| |
Mansco | MI | Countersink Cutters | Steel | ASTM F1941-10 Fe/Zn-Ni | 1/4-20 x 3/4 slot bolt hardened black gmw4205 | 20500 |
| |
Mansco | MI | Countersink Cutters | Steel | ASTM F1941-10 Fe/Zn-Ni | 5/16-18 x 3/4 slot bolt hardened steel gmw 4205 blk | 1088 |
| |
Century | NY | Countersink Cutters | Steel | 5/16 x 3/4 shoudler bolt 1/4-20 thread alloy b18.3 | 200 |
| ||
METRO IND | OH | Countersink Cutters | Steel | M14 x 50 | M14x50 counterbore thick flange 12 point cap screw alloy 170 000 psi | 7 |
| |
Century | NY | Countersink Cutters | Steel | Plain | ohio nut & bolt hw2114 ohio nut & bolt hw2114 1/4-20 x 7/8 steel plain | 1909 |
| |
BIG BOLT | IL | Countersink Cutters | Class 10.9 | Plain | M16-2.00 x 60 | bolts & cap screws12 point flange screw (counterbore) | 8350 |
|
Jackson | MS | Countersink Cutters | Steel | 1/2-13 x 1nc left hand grade 8 bolt custom order | 6 |
| ||
GLF | OH | Countersink Cutters | 1/2 x 1 | 1/2 1-flute 82 deg countersink hss () () | 15 |
| ||
Northern | MN | Countersink Cutters | 1/2-13 x 1 | pt counterbore capscrew | 21 |
| ||
Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 1/4-20 x 1 special rectangular head bolt triv znc | 29600 |
| |
Komar | OH | Countersink Cutters | Steel | 5/16-18 x 1 1/4 bolt-rib(.354x.435)neck hdrpt 18-8 | 1920 |
| ||
OSSCO | RI | Countersink Cutters | #1 1/8 x 1 1/4 | #1 1/8x1-1/4 center drill & countersink | 10 |
| ||
Century | NY | Countersink Cutters | Steel | an7-12a 7/16-20 x 1.34 bolt | 27 |
| ||
Century | NY | Countersink Cutters | Steel | Nickel | 1/4-20x1.375 conn bolt nickel plate stafast# ba142035uhd-ni | 1500 |
| |
GLF | OH | Countersink Cutters | Steel | m12-1.25 x 35 bolt w/washer per dwg 10-10724 () () | 6084 |
| ||
ACF | CA | Countersink Cutters | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18 x 1 3/4 | 5/16-18x1-3/4 s/s 12 point counterbore capscrew | 3953 |
| |
ACF | CA | Countersink Cutters | 1/2-13 x 1 3/4 | 1/2-13x1-3/4 12 point counterbore cap screw thermal black | 215 |
| ||
Wurth | IN | Countersink Cutters | Steel | Black Oxide | 1 3/8 x 2 x 1/4 | 1ea 3/8 x 2 l x 1/4 shank x 82 single flute black finish countersink | 14 |
|
IPC | VA | Countersink Cutters | Steel | Phosphate | 5/16-18 x 2 1/2 | 5/16-18x2 1/2 12 pt. counterbore screw gmw-3179h phos & oil 170m tensile must gauge 3a after plating | 1,693 |
|
Mansco | MI | Countersink Cutters | Steel | Plain | 1/2 x 3 | oal 6 flute 82 degree carbide countersink 1/box | 2 |
|
BIG BOLT | IL | Countersink Cutters | Steel | Plain | M12 x 3512 | bolts & cap screws12 point flange screw (counterbore)pt | 823 |
|
B & K FAST | PA | Countersink Cutters | 1/2 x 6 | 1/2 x 82 deg 6 flute countersink | 2 |
| ||
B & K FAST | PA | Countersink Cutters | 1 x 6 | 1 x 82 deg 6 flute countersink | 1 |
| ||
SRF | AL | Countersink Cutters | Steel | Plain | #1 x 82 | deg hss 5/32x13/32 countersink | - |
|
NutsBolts | NE | Countersink Cutters | 1/4 x 82 | 1/4 82 countersink bit | 3 |
| ||
NutsBolts | NE | Countersink Cutters | 1/2 x 82 | 1/2 82 countersink bit | 18 |
| ||
ISSCO | MO | Countersink Cutters | Steel | Plain | 1 x 82 degree x 1/2 shank | high speed steel single flute 82 degree 1 x 2 3/4 od with 1/2 shank | 1 |
|
BIG BOLT | IL | Countersink Cutters | Steel | Plain | M12 x 7012 | bolts & cap screws12 point flange screw (counterbore)pt | 5000 |
|
Jay-Cee | MI | Countersink Cutters | Steel | bolt m12 for bp60 riveter | inquire |
| ||
Jay-Cee | MI | Countersink Cutters | Steel | w14020 bolt 1/4-20 | inquire |
| ||
Jay-Cee | MI | Countersink Cutters | Steel | w51618 bolt 5/16-18 | inquire |
| ||
Ababa | CA | Countersink Cutters | 1-3/64 1/8 | 1 (3/64) 1/8 body x 1-1/4 oal drill/countersink hss | 3 |
| ||
Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 oal drill/countersink hss | 13 |
| ||
Ababa | CA | Countersink Cutters | 4-1/8 5/16 | 4 (1/8) 5/16 body x 2-1/8 oal drill/countersink hss | 3 |
| ||
Ababa | CA | Countersink Cutters | 4-1/8 5/16 | 4 (1/8) 5/16 body x 2-1/8 oal drill/countersink hss | 3 |
| ||
Ababa | CA | Countersink Cutters | 5-3/16 7/16 | 5 (3/16) 7/16 body x 2-3/4 oal drill/countersink hss | 3 |
| ||
Ababa | CA | Countersink Cutters | 5-3/16 7/16 | 5 (3/16) 7/16 body x 2-3/4 oal drill/countersink hss | 2 |
| ||
Ababa | CA | Countersink Cutters | 6-7/32 1/2 | 6 (7/32) 1/2 body x 3 oal drill/countersink hss | 2 |
| ||
Ababa | CA | Countersink Cutters | 0-1/32 1/8 | 0 (1/32) 1/8 body x 1-1/4 oal drill/countersink hss | 12 |
| ||
Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 o.a.l carbide drill/countersink | 1 |
| ||
Ababa | CA | Countersink Cutters | 4-1/8 5/16 | 4 (1/8) 5/16 body x 2-1/8 o.a.l carbide drill/countersink | 1 |
| ||
Ababa | CA | Countersink Cutters | 6-7/32 1/2 | 6 (7/32) 1/2 body x 3 o.a.l carbide drill/countersink | 1 |
| ||
Ababa | CA | Countersink Cutters | 0-1/32 1/8 | 0 (1/32) 1/8 body x 1-1/2 o.a.l drill/countersink | 1 |
| ||
Ababa | CA | Countersink Cutters | 00 1/8 | 00 (.025) 1/8 body x 1-1/2 o.a.l drill/countersink | 1 |
| ||
Ababa | CA | Countersink Cutters | 1 | 1 three flute countersink 82 deg. | 3 |
| ||
Ababa | CA | Countersink Cutters | 1 | 1 three flute countersink 82 deg. | 1 |
| ||
Ababa | CA | Countersink Cutters | 1/2 | 1/2 three flute countersink 82 deg. | 3 |
| ||
Ababa | CA | Countersink Cutters | 1/2 | 1/2 three flute countersink 82 deg. | 1 |
| ||
Ababa | CA | Countersink Cutters | 1/2 | 1/2 three flute countersink 90 deg. | 2 |
| ||
Ababa | CA | Countersink Cutters | 1/4 | 1/4 three flute countersink 82 deg. | 3 |
| ||
Ababa | CA | Countersink Cutters | 1/4 | 1/4 three flute countersink 82 deg. | 1 |
| ||
YANKEE | NH | Countersink Cutters | 1/2 | 1/2 82deg 6-flute catterless countersink | 1 |
| ||
Jackson | MS | Countersink Cutters | 1/4 | 1/4 countersink 1 flute 82 degree | 1 |
| ||
Jackson | MS | Countersink Cutters | 5/16 | 5/16 countersink 1 flute 82 degree | 1 |
| ||
Jackson | MS | Countersink Cutters | Steel | Plain | 1 | 1 countersink 6 flute 82 degree hss | 1 |
|
HBBOLT | CA | Countersink Cutters | 5/16 | single-flute countersink [82] | 4 |
| ||
HBBOLT | CA | Countersink Cutters | 1/4 | single-flute countersink [82] | 9 |
| ||
HBBOLT | CA | Countersink Cutters | 1/2 | single-flute countersink [82] | 8 |
| ||
HBBOLT | CA | Countersink Cutters | #10 | zero-flute countersink [82] | 24 |
| ||
HBBOLT | CA | Countersink Cutters | 1 1/2 | single-flute countersink [82] | 1 |
| ||
HBBOLT | CA | Countersink Cutters | 1/8 | single-flute countersink [82 / carbide] | 2 |
| ||
HBBOLT | CA | Countersink Cutters | 1 1/4 | single-flute countersink [82] | 1 |
| ||
GLF | OH | Countersink Cutters | 1 | 1 1-flute 90 deg countersink hss () () | 2 |
| ||
GLF | OH | Countersink Cutters | 1/4 | 1/4 single flute countersink 82-deg | 4 |
| ||
THRDFAST | FL | Countersink Cutters | 5/16 | countersink bit | 1 |
| ||
THRDFAST | FL | Countersink Cutters | 3/16 | countersink bit | 1 |
| ||
NAPPCO | TX | Countersink Cutters | 1/2 | 1/2 hss countersink three flute 82 angle (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) (506-ALFA TOOLS) | 6 |
| ||
THRDFAST | OK | Countersink Cutters | 1/2 | countersink single flute 82deg | 1 |
| ||
THRDFAST | FL | Countersink Cutters | 1 | 1 countersink bit | 1 |
| ||
SRF | AL | Countersink Cutters | 1 | 1 sgl flute countersink 90 deg | - |
| ||
BoltCraft | NE | Countersink Cutters | 1-6 | 1-6 regular hss combined drill bit and countersink set | inquire |
| ||
BHAM | AL | Countersink Cutters | Steel | 1/2 x 6 screw bolt | 14 |
| ||
Wurth | IN | Countersink Cutters | .1910 | .1910 pilot 100deg 1/2 countersink | 36 |
| ||
Wurth | IN | Countersink Cutters | .1280 | .1280 pilot 100deg 3/8 countersink | 90 |
| ||
ZAL INDUS | CA | Countersink Cutters | #10 | #10 countersink drill bits | 3 |
| ||
Komar | OH | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 2 1/2 bolt(1/4hd)rib nk f/t gr5.1 zc | 1350 |
| |
IPC | VA | Countersink Cutters | Steel | 1/2 | 1/2 in. high-speed steel countersink 5 flute 82 deg 1 3/4 long .25 shank dia | 22 |
| |
Endries | WI | Countersink Cutters | Steel | 15656 1/2 tip 3/16 pilot 1-5/32 overall length 45 degree 4 flute countersink cutter | 15 |
| ||
MMCC | IL | Countersink Cutters | M10.4 | m10.4mm countersink bit mm volkel/67310 | 62 |
| ||
MMCC | IL | Countersink Cutters | 316, 317, A4 Stainless | M16.5 | m16.5mm countersink bit mm volkel/67316 | 237 |
| |
MMCC | IL | Countersink Cutters | M12.4 | m12.4mm countersink bit mm volkel/67312 | 94 |
| ||
Century | NY | Countersink Cutters | Steel | 10-1167 bolt .375-16unc-2a 1.50 lng m500 astm f468 parker 10-1167 | 7 |
| ||
GLF | OH | Countersink Cutters | Steel | Plain | m16-2.00 x 70mm special fit bolt 6g thread fit class 8.8 plain | () | 25 |
| |
Century | NY | Countersink Cutters | Steel | an4-30a bolt 1/4-28 x 3.03 | 20 |
| ||
Century | NY | Countersink Cutters | Steel | parker hannifin 5843106-104 bolt-fsi | 5 |
| ||
Mansco | MI | Countersink Cutters | Steel | Black Oxide | 1/2-13 x 9.87 leveling bolt blk ox w/charcoal base | 50650 |
| |
Century | NY | Countersink Cutters | Steel | 422911-2 bolt line up lt | 183 |
| ||
Century | NY | Countersink Cutters | Steel | 121501-8 bolt internal wrench | 261 |
| ||
Century | NY | Countersink Cutters | Steel | Plain | 1/2-13 x 3 special per print bolt w 3/8 dia.pilot steel plain | 1 |
| |
THRDFAST | AL | Countersink Cutters | 1/2 | countersink bit | 3 |
| ||
Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 1/2-13 x 4.937 glass leveler panel bolt triv znc | 2584 |
| |
Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | m18-2.5 x 170mm d-bolt triv znc | 23 |
| |
Century | NY | Countersink Cutters | Steel | an5-22a bolt aircraft 5/16-24 x 2-7/32 | 6 |
| ||
Mansco | MI | Countersink Cutters | Steel | Plain | 1/2-13 x 7 leveling bolt plain | 1300 |
| |
Century | NY | Countersink Cutters | Steel | an5-20a bolt .31-2 | 4 |
| ||
Century | NY | Countersink Cutters | Steel | 5/16-18 (2a) x 5 5/8 housing bolt per print 4140 steel | 100 |
| ||
Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 1/4-20 x 2.75 oal handle mounting bolt triv znc | 23 |
| |
Mansco | MI | Countersink Cutters | Steel | Passivated | 1/4-20 x 1-5/8 special bolt w/knurled portion 304 s.s. passivated (per print) | 10160 |
| |
Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 1/4-20 x 3.25 oal handle mounting bolt triv znc | 50 |
| |
Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 1/2-13 x 7 leveling bolt znc | 3950 |
| |
Century | FL | Countersink Cutters | Steel | 116165-1 bolt-tension spline () () | 398 |
| ||
Century | NY | Countersink Cutters | Steel | an5c13a bolt .31-2 | 5 |
| ||
Mansco | MI | Countersink Cutters | Steel | champion xl-801 1/2 x 82 degree 1 flute high hook countersink 1/box | 6 |
| ||
Century | FL | Countersink Cutters | Steel | 422911-2 bolt line up lt | 183 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.