7/8 inch length Bent Bolts
Bent Bolts can have any of a “U”, “V” or “J” shape and are usually used to keep piping or round shaft or conduit in place against the bend of the bolt. Each end of the bent bolts has a machine thread, and a nut washer combination is used to tighten the shaft against a flat surface.
5 results, (click on any line for more information)
Search Results Sponsored by Dale Fastener Supply, your source for Bent Bolts U,V,J. For more results, visit dalecompany.com | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
Buy Bent Bolts from one of our FCH Network Members | ||||||||
Jackson | MS | Bent Bolt (U, V, J) | Steel | Zinc/Clear | 1/4 x 7/8 x 2 15/16 1/2 | 1/4x7/8x2 15/16 u-bolt 1/2 pipe #ltb | 33 |
|
Jackson | MS | Bent Bolt (U, V, J) | Steel | Galvanized | 1/4-20 x 7/8 x 2 15/16 | u-bolt hot dip 1/2 pipe #ltbhg | 210 |
|
Hayes | CA | Bent Bolt (U, V, J) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 7/8 | 10-24 x 7/8 (pipe) u bolt 18-8ss (1-1/2 inside depth) | 13 |
|
NAPPCO | TX | Bent Bolt (U, V, J) | Steel | Plain | 3/8-16 x 7/8 | u-bolt fullcirclew/saddleclamp3/8-16x7/8 (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) (50-BOLTS) | 144 |
|
NAPPCO | TX | Bent Bolt (U, V, J) | Steel | Plain | 3/8-16 x 7/8 | u-bolt fullcirclew/saddleclamp3/8-16x7/8 | 144 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.