FCH Member Advertisement
FCH News
| Buy End Mills from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| TownCountry | AR | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | hss 2-flute end mill single end shank | 1 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 2 flute 1/4 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | end mill 2 flute 1/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | end mill 2 flute 3/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | end mill 3 flute 1/2 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 3 flute 1/4 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | end mill 3 flute 1/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | end mill 3 flute 3/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | end mill 2 flute 1/2 square | 1 |
| ||
| Jay-Cee | MI | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 1/4 dia. 3/8 shank 5/8 doc 2-7/16 oal hssco uncoated 4 flute plain external center cutting solid end mill series | inquire |
| |
| Jay-Cee | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 3/4 1 1/2 4 5 flute single end carbide hpe high performance end mill center cutting end mill-altin | inquire |
| |||
| Jay-Cee | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 3/4 1 1/2 4 4 flute single end carbide hpe high performance end mill center cutting end mill-altin series | inquire |
| |||
| MESAFAST | CA | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/16 4-flute finishing end mill 1-5/8 cut 4 overall lgth-solid carbide | 4 overall lgth-solid carbide | 4 overall lgth-solid carbide | 4 overall lgth-solid carbide | 2.0 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 2 | 1/8 2-flt reg lgth sq-end 30 deg helix end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 4 | 1/8 4 flute reg. length 30deg.helix carb.end mil | 7 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 4 | 3/16 4 flute reg. length 30deg.helix carb.end mil | 6 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 4 flute reg. length 30deg.helix carb.end mil | 5 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 4 | 3/8 4 flute reg. length 30deg.helix carb.end mil | 6 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 4 | 1/2 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1 x 4 | 1 4 flute rougher 30 deg carbide end mil uncoat | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2 flute reg. length 45deg. helix carb.end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 2 | 3/8 2 flute reg. length 45deg. helix sq end carb.end mil zrn ctd | 2 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 2 flute long length 45deg. helix s.e. carb.end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/32 | 3/32 2-flt reg lgth sq-end 30deg helix end mill | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 5/32 | 5/32 2 flute reg lgth sq-end 30 deg helix end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | 3/16 2-flt reg lgth sq-end 30 deg helix end mill | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/16 | 1/16 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/32 | 3/32 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | 1/8 2 flute reg. length 45deg. helix carb.end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | 1/8 2 flute long length 45deg. helix carb.end mil | 1 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 98 3/8 | 98193 3/8 2 flute spoon cutter endmill zrn | 7 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2fl crb end mill | 2 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 4 | 3/8 4fl crb end mill | 3 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | e375sf4 3/8 carbide center cut endmill | 13 |
| |||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | dpc560 3/16x3/8 cob 4fl end mill | 4 |
| |||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | hm90 e90a-d1.25-5-w1.00 heli2000 endmill (iscar) | 8 |
| |||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | dpc560 3/8x3/8 cob 4fl end mill | 4 |
| |||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | dpc560 1/2x1/2 cob 4fl end mill | 2 |
| |||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | dp530 3/4x3/4 cob 2fl end mill | 1 |
| |||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | fl ball nose carbide end mill 1/box | 8 |
| |||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | fl ball nose carbide end mill 1/box | 2 |
| |||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 x 1 x 3 | cobalt multi-flute end mill 1/box | 1 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 x 3/4 x 4 1/4 | cobalt 5 flute roughing endmill 1/box | 2 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 x 1 1/4 | cobalt multi-flute roughing end mill 1/box | 2 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 5 1/4 | roughing endmill# 714a148l | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 5 1/4 | s.e. 4 fl endmill# 525a148d | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 5/8 x 1 5/8 | cobalt multi-flute roughing end mill 1/box | 2 |
| ||
| METRO IND | OH | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 3 3/8 | center-cut 4-flute single end 1/2 shank rh end mill hss | 5 |
| ||
| METRO IND | OH | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 2 1/4 | center-cut 2-flute single end rh end mill solid carbide | 1 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | 3/8x3/8 4 flute single end carbide end mill | 3 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2x1/2 4 flute single end carbide end mill | 3 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 4 | 5/8 4 flute regular length hss end mill) | 4 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 7/8 x 7/8 | 7/8x7/8 usa hss 4 flute end mill) | 2 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 7/8 x 3/4 | 7/8x3/4 usa end mill) | 1 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 4 flute single end carbide end mill | 7 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | kremlin seal s/s-carbide insert (10/pack) | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 5/8 2 | -flute s/e c/c end mill | 4 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 7/8 x 3/4 | multi flute s/e end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 x 3/4 2 | -flute s/e c/c end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 2 | -flute d/e c/c end mill | 5 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 7/32 x 1/4 4 | -flute s/e carbide end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 1/4 | s/e corner rnd end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | end mill 1/2x1/2x1-1/4x3-1/4 2 f | 2 |
| |||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 5/8 2 | -flute s/e c/c end mill | 2 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 1/2 | multi flute s/e end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/2 x 3/4 2 | -flute s/e c/c end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 5/8 2 | -flute d/e c/c end mill | 1 |
| ||
| Purchase | MO | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/8 | 5/8 two flute single end end mill 1/2 shank hi-speed steel | 1 |
| |
| Northern | MN | Milling Cutters (End Mills, Face Mills etc.) | s/o 5/16x3/8 4fl sq endmill cham | 1 |
| |||
| Northern | MN | Milling Cutters (End Mills, Face Mills etc.) | s/o 1/8 x3/8 4fl sq endmill cham | 1 |
| |||
| Northern | MN | Milling Cutters (End Mills, Face Mills etc.) | s/o 3/8 x3/8 4fl sq endmill cham | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/8 | cyl end cut fast mill 3/4lof | 2 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute de end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 2 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mills | 2 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute de end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | fl se center cut endmill | 5 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 4 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute de end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 2 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flu se center cut endmill | 3 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute se end mill | 2 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Titanium | 9/32 | endmill 4 fl ctr cut se carbonitrite | 1 |
| |
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute de end mill | 1 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute de end mill | 2 |
| |||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | de 4fl center cut endmill | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | de 4 fl center cut endmill | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | flute de end mill | 1 |
| |||
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M14 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13 | single end mill din 327ba hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M15 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M10 | end mill din 327bm hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M10.5 | end mill din 327bm hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M12 | end mill din 844m hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M6 | single end mill din 327ba hss xs | 6 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M7 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M10 | single end mill din 327ba hss xs | 4 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13.5 | single end mill din 327ba hss xs | 1 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M21 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M4.5 | end mill din 327bm hss xs | 3 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M7 | end mill din 327bm hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M12 | end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13 | end mill din 327bm hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M16 | end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M8 | double end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M7 | end mill din 327r hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M9 | end mill din 327r hss xs | 20 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M5 | end mill din 844a hss xs | 4 |
|
| WDMB | IA | Milling Cutters (End Mills, Face Mills etc.) | tool cut end mill alfa sc60630 | 2 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 1 3/4 | cat40 ad/b end mill holder 3/4x1-3/4 | 1 |
| ||
| B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 2 flute | 11 |
| ||
| B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 4 flute | 5 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | wnmg 432-3j sp4019 | 10 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 250 | vnmg 332a-2n nl250 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cnmg 542 hr ph 5115 | 8 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 2 | 5/16 ca 2f reg. | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | router 1/2 ca 2f 1-3/4loc 4 oal | 2 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cobra e 1/16 ca 2f reg | 60 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cobra e 3/8 ca 3f alu zrn | 5 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cobra e 3/8 ca 4f reg | 36 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cobra e 3/8 x 7/8 x 3/8 x 2-1/2 ca 3f | 1 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cobra e 11/32 ca 4f reg | 1 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | cobra e 1/2 ca 4f long 6 oal tialn | 3 |
| |||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 4t3 x 7 | snmg 643a-4t s3x7 | 30 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 50 | tnmc 43nv gp50 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 20 | wnmg 433a-4t nl920 | 14 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | cnmg 432a-4e nl400 | 9 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | tnmg 432-4t nl400 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | cnmg 643-4t nl 400 | 11 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face M ills etc.) | 300 | ccmt 432a-73 nl300 (120408) | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 20 | dnmg 433a-4t nl920 | 12 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 250 | cnmg 432-1b nl250 | 17 |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 5/16 | cen cut dbl end 2fl m42 end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | single end 4fl sol carb end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | sq end cen cut 2fl sol carb end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 11/32 | sq end cen cut 2fl sol carb end mi | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | cen cut dbl end 4fl m42 end mill | 1 |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | fl carbide end mill se | - |
| |||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 3/8 | se 4fl hss roughing end mill tin | - |
|
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 3/32 x 1-1/2loc x 3/8 sh taper end mill | - |
| |||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 2fl .50loc se end mill | - |
| |||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 3/8 x 3/8 | end mill double end 2 flute | 2 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | end mill double end 2 flute | 2 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 3/8 | double end mill 2 flute | 2 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | end mill double end 2 flute | 1 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 5/8 | 5/8 x 5/8 end mill 2 flute | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 9/32 x 3/8 | 9/32 x 3/8 2 flute end mill | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 13/32 x 3/8 | 13/32 x 3/8 2 flute end mill | 1 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/8 x 5/8 | 5/8 x 5/8 hss 4 flute end mill | 6 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 3 | 3/4 x 3/4 x 3 (6 long) carbide end mill se 4fl altin domestic | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 x 3/8 end mill 2 flute | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2 x 1/2 end mill 2 flute | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/8 | 3/16 x 3/8 end mill 2 flute | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2 x 1/2 cobalt rougher end mill altin coated se 4fl | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 x 1 1/2 | 1/4 x 1/4 x 1 1/2 carbide end mill se 4fl | 2 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
