Socket Cap Screws
Socket Head Cap Screws are typically used in machine parts, die fixturing, and clamping. Socket head cap screws have a flat faced, circular raised head with an indented hex socket. They can be fully or part threaded, are usually manufactured from high grade alloy steel. Dimensionally, metric socket head cap screws are covered by the relevant DIN, ISO or JIS standards, but US/Imperial socket head cap screws are covered by the ASME B18.2.1 and B18.3 specifications.
Socket Cap Screws Diameters
Socket Cap Screws are available on the FCH Network with Imperial/US diameters that range from #00 to 6 and with Metric diameters that range from M1 to M80. The length of Socket Cap Screws is usually measured from the point to the underside of the head.
Socket Cap Screws Lengths
Socket Cap Screws are available on the FCH Network with lengths that range from 1/8 to 18.
Socket Cap Screws are available on the FCH Network in materials that range from Steel to Rubber, Buna-N, Neoprene etc.
- Class 9.8
- Class 10.9
- Class 12.9
- 300 Stainless (A1,A2, 18-8,304,310 etc.)
- 316, 317, A4 Stainless
- 400 Stainless (405, 410,416,420,430 etc.)
- Duplex Stainless (2205, Ferralium etc.)
- Ni-Cu Alloy (Monel, K-Monel, etc.)
- Superalloy (Inconel, Hastelloy, Alloy 20)
- Silicon Bronze
- Nylon (Polyamide)
- Rubber, Buna-N, Neoprene etc.
Socket Cap Screws Finishes
Socket Cap Screws are available on the FCH Network in finishes or coatings that range from Plain to Silver