"FCH works great when looking for that hard to find part. Use it all the time! "
Michael RicardU Turn Fastener
FCH Member Advertisement
Tap Bolts
Fully Threaded Hex Tap Bolts are fully threaded hex machine bolts regardless of their diameter. The dimensional specifications for hex tap bolts are covered by ASME B18.2.1 Standard.
Tap Bolts Diameters
Tap Bolts are available on the FCH Network with Imperial/US diameters that range from #1 to 4 The length of Tap Bolts is usually measured from the point to the underside of the head.
Click on the diameters below to view or Search All Tap Bolts
Tap Bolts Lengths
Tap Bolts are available on the FCH Network with lengths that range from 1/4 to 18.
Click on the lengths below to view or
Search All Tap Bolts
Search All Tap Bolts
Tap Bolts Materials
Tap Bolts are available on the FCH Network in materials that range from Steel to Rubber, Buna-N, Neoprene etc.
Click on the materials below to view or Search All Tap Bolts
- Class 10.9
- 300 Stainless (A1,A2, 18-8,304,310 etc.)
- 316, 317, A4 Stainless
- 400 Stainless (405, 410,416,420,430 etc.)
- Duplex Stainless (2205, Ferralium etc.)
- Ni-Cu Alloy (Monel, K-Monel, etc.)
- Superalloy (Inconel, Hastelloy, Alloy 20)
- Titanium
- Copper
- Aluminum
- Brass
- Silicon Bronze
- Nylon (Polyamide)
- Rubber, Buna-N, Neoprene etc.
Tap Bolts Finishes
Tap Bolts are available on the FCH Network in finishes or coatings that range from Plain / Furnace Black to Phosphate
Click on the finishes below to view or Search All Tap Bolts
- Copper Plated
- Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.)
- Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)
- Fluoropolymer-Based (Xylan, Fluorokote, Teflon)
- Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.)
- Nickel Plated
- Non-Electrolytic Zinc & Aluminum Flakes + Matrix
- Painted
- Passivated
- Phosphate