Hex Machine Bolts are threaded bolts with a hexagonal head on one end, with no washer face on the bearing surface and a threaded shaft on the other end. Hex bolts are tightened with a wrench and are used to connect metal parts. The body tolerances of hex machine bolts are not as close as those of hex cap screws. Hex machine bolts are covered under ASME Standard B18.2.1
Hex Bolts Diameters
Hex Bolts are available on the FCH Network with Imperial/US diameters that range from #1 to 6 and with Metric diameters that range from M2 to M42. The length of Hex Bolts is usually measured from the point to the underside of the head.
Hex Bolts are available on the FCH Network in materials that range from Steel to Resin (Phenolic, etc.)
- Class 10.9
- 300 Stainless (A1,A2, 18-8,304,310 etc.)
- 316, 317, A4 Stainless
- 400 Stainless (405, 410,416,420,430 etc.)
- Duplex Stainless (2205, Ferralium etc.)
- Ni-Cu Alloy (Monel, K-Monel, etc.)
- Superalloy (Inconel, Hastelloy, Alloy 20)
- Silicon Bronze
- Rubber, Buna-N etc.
- Resin (Phenolic, etc.)
Hex Bolts Finishes
Hex Bolts are available on the FCH Network in finishes or coatings that range from Plain to Phosphate