FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| MAINSOURC | NH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | #10 x 1 1/2 | phil pan t/s type-a stl z/clr | 1300 |
|
| Century | FL | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | .25 x .50 | fastex# 2601-00-2099 xmas tree clip blk .25x.50 | 200 |
| ||
| Century | FL | Wire Rope Clamps, U-Bolt Clamps | Cadmium/Yellow | 743-12 | an743-12 | 1 |
| |
| Century | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #6-32 | 6-32 hex nut a/f-.188 thk-.063 stst per astm a582 cond a passivate mil-f-14072 | 4 |
|
| Century | FL | Socket Head Cap Screw | null | Plain | 1-8 x 5 | 1-8 x 5 socket cap alloy stl | 10 |
|
| Century | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 1/2 | #8 x 1/2 phillips truss type-a steel zinc | 3580 |
|
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | .504 x .364 x .070 | 1057pt-012 .504 x .364 x .070 o-ring buna n 70 a7a | 852 |
|
| Century | FL | Blind Rivet | Plain | 3/16 (.251-.375) | cherry 4173-6-08 vechecr4173-6-08 | 200 |
| |
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | asm # w114054-ss-12 washer | 329 |
| |
| Century | FL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | pop #jnt1100 jack nut friction wrench | 825 |
| ||
| Century | FL | parker hannifin 2073442-101 rev.-seal(face)-fsi | 150 |
| ||||
| Century | FL | Pipe Plugs (Socket) | Steel | Plain | 2 | ms27769c2 q2c | 4 |
|
| Century | FL | Blind Rivet | Steel | Zinc/Clear | 3/16 (.251-.375) | cherry cr3214-6-06 vechecr3214-6-06 | 300 |
|
| Century | FL | Flat Head Socket Cap Screw | ASTM A574 | Plain | #6-32 x 1/2 | 6-32 x 1/2 flat hd soc cap alloy stl | 665 |
|
| Century | FL | Hex Male/Female Standoff | Plain | nas1829c4c16 | 5 |
| ||
| SWACO | OH | Installation & Setting Tools | Steel | #1-64 | 7551-01 spec heli-coil tool | 19 |
| |
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3591-6cn750 heli-coil insert | 7310 |
| ||
| SWACO | OH | Socket Head Cap Screw | ASTM A574 | Plain | M8-1.25 x 65 | m8-1.25x65 shcs alloy 8.8 stl blk p/t din 912 | 100 |
|
| SWACO | OH | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | f4-m5-2 pem flush nut 400 ss | 2398 |
| |
| SWACO | OH | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/8 | 6-32 x 3/8 phillips flat m/s zi w/patch | 4152 |
|
| SWACO | OH | Dowel Pin | Steel | Plain | M6 x 35 | M6x35 dowel pins stl din 6325 | 160 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 1/4-20 x 3/4 | 1/4-20 x 3/4 socket set cup point 316 stainless | 2 |
| |
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | #10-24 x 6 1/4 | 10-24 x 6-1/4 socket cap alloy | 2 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | M4.2-1.41-1.41 x 25 | m4.2-1.41 x 25mm torx pan hd sems tap screw 12mm o.d. | 1 |
|
| OneMonroe | MA | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | 2 x 1/4 | 2x1/4 round hd u-drive st z rohs | 9000 |
|
| Alma Bolt | MI | Metal Drill Bits | Steel | k xl5 | champion drill bit brute platinum | 11 |
| ||
| Alma Bolt | MI | Set Screw (Socket Head) | Plain | M6-1.00 x 50 | m6 x 1.0 x 50 | socket set screw cup pt din 916 | 68 |
| |
| Alma Bolt | MI | Finished Hex Nut | Plain | 1/4-28 | 1/4-28 sae | left hand hex nut | 94 |
| |
| Alma Bolt | MI | Threaded Rod | Grade B16 | Plain | 3/4-8 | 1 3/4-8 astm | b16 full thread rod | 12 |
|
| Alma Bolt | MI | Carriage Bolt | Grade 5 | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 | carriage bolt grade 5 | 1002 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Plain | 5/8-18 x 2 3/4 | 5/8-18 x 2 3/4 | grade 8 ally hcs sae | 13 |
|
| Alma Bolt | MI | Carriage Bolt | Steel | Galvanized | 3/8-16 x 6 | 3/8-16 x 6 | hdg carriage bolt | 58 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.25 x 75 | m12 x 1.25 x 75 x-fine | hex cap screw 8.8 zinc din 960 | 1 |
|
| Alma Bolt | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/4 | #14 x 1 1/4 | st. st. flat square drive sms | 500 |
|
| Alma Bolt | MI | Machine Screw Style Anchor, Caulk-In Anchor | Plain | 3/8 | 3/8 set tool #9231 | rawl calk-in anchor | 1 |
| |
| Alma Bolt | MI | L-Wrenches, Allen Wrenches & Torx Wrenches | M9 | 66990 9 pc metric magic ring s | wiha brand tools | 2 |
| ||
| Alma Bolt | MI | Electrical Connectors & Plugs | 11 | 66861 pigtail 11 | long 3 wire plug in | 12 |
| ||
| Alma Bolt | MI | Conical Ribbed Safety Washer (Schnorr) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4 | s4 stainless steel | schnorr washer bolting series | 375 |
|
| Alma Bolt | MI | Internal Type HO Retaining Ring | Plain | 5/8 | 2 5/8 | internal ret ring ho | 6 |
| |
| Alma Bolt | MI | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 1 1/8 | 3/16 x 1 1/8 | st. st. spring roll pin | 300 |
|
| Alma Bolt | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/2 | st st flat phillips self-drill | 1120 |
|
| Alma Bolt | MI | Machine Screw | Steel | Plain | #6-32 x 3/4 | 6-32x3/4 pan head machine | 30 |
|
| Alma Bolt | MI | Dowel Pin | Steel | Plain | 5/16 x 2 1/2 | 72 |
| |
| Alma Bolt | MI | Machine Screw | Steel | Zinc/Black | #6-32 x 3/4 | black flat torx (6-lobe) m/s | 174566 |
|
| Century | FL | Service & Repair Kits | bf64 kit rev c | 10 |
| |||
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M10-1.50 x 40 | M10-1.5x40 cl.10.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Black Oxide | M8-1.25 x 30 | M8-1.25x30 cl.10.9 frame bolt-non-indented-non-serrated-furnace black iso 4162 | 10000 |
|
| OneMonroe | MA | Finished Hex Nut | Grade 8 | Zinc/Yellow | 5/8-11 | 5/8-11 hex finish nut domestic gr 8 yellow zn | 468 |
|
| OneMonroe | MA | Set Screw (Socket Head) | Steel | Plain | 3/4-10 x 3/4 | 3/4-10 x 3/4 soc set-cup pt | 66 |
|
| OneMonroe | MA | U-Bolt | Steel | Plain | 2 | u bolt with 2 nuts | 15 |
|
| OneMonroe | MA | Sems Machine Screw | Steel | Zinc/Clear | M3-.5-0.50 x 8 | m3-.5 x 8 pan phillips ext sem screw pkg plated | 2100 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 2 | Plain | 1/2-13 x 2 1/4 | 1/2-13 x 2 1/4 hex cap screw grade 2 | 12 |
|
| OneMonroe | MA | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4 | #4 external tooth lockwasher stainless steel | 3900 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 gr.8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| American | WI | Pull-Out Dowel Pin (Threaded Pin) | Plain | M20 x 70 | m20x70 pull dowel pin din 7979d | 25 |
| |
| American | WI | Straight Anchor Bolt | Steel | Plain | 3/4-10 x 13 | 3/4-10x13 anchor bolt f1554-36 | 116 |
|
| American | WI | Machine Screw | Steel | Plain | #16 | 16 oz crc contact cleaner 2000 13 oz fill amount precison cleaner | 22 |
|
| American | WI | USS Flat Washer | Steel | Zinc/Yellow | 3/4 | 3/4 uss flat washer zinc yellow | 984 |
|
| Bossard | AZ | Conical Ribbed Safety Washer (Schnorr) | Steel | Plain | washer rip lock nfe25-511m bn2332 | 250 |
| |
| Bossard | AZ | flush mount-low displace.studs penn engineering | 10120 |
| ||||
| Empire | WA | Set Screw (Square Head) | Steel | Plain | M12 x 80 | m12 x 80 sq hd set screw | 170 |
|
| Empire | WA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 5/16 x 2 | 5/16 x 2 gr2 hex cap screw zp | 70 |
|
| Field Fas | IL | SAE Flat Washer | Steel | ASTM F1941-10 Fe/Zn | 3/8 | 3/8 sae flat washer stl zc w/yellow trivalent per astm f1941 fe/zn 5ct 96 hours to white rust | 20 |
|
| Irwin Ind | Ont | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M1.6 x 6 | m1.6 x 6 socket cap st/st c/w nylon patch din 912 | 1000 |
|
| Optimas | IL | Round Spacer | Aluminum | Nickel Plated | M11 x 14.7 | 11x14.7x10 beam reducer spacer aluminum electroless nickel per drawing tmpi clean | 48 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4-20 x 1 3/4 | button head socket cap screws 304 ss 1/4-20 x 1-3/4-black oxide treatment | 500 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #2-56 x 3/8 | button head socket cap screws 316 ss #2-56 x 3/8 | 179 |
|
| Coburn Myers Fastening Systems | PA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain | heavy hex bolt (b7 b8 a307b etc.) a194 grade b7 plain | 9 |
| |
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Black | #12-14 x 1 | unslotted hex washer head self drilling screw-black zinc bake #12-14 x 1 | 500 |
|
| Raw Produ | NJ | Flat Washer | Aluminum | Plain | 8-8 1/4 dome head (recessed crown) aluminum supratite with washer | att06-8-8w | 1569 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Plain | hex machine bolt class 8.8 plain | 1 |
| |
| Coburn Myers Fastening Systems | PA | Heavy Hex Nut | Grade C | Plain | heavy hex nut a563 grade c plain | 20 |
| |
| Raw Produ | NJ | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 2 1/2 | button head socket cap screws 316 ss 5/16-18 x 2-1/2 | 637 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 10.9 | Plain | hex machine bolt class 10.9 plain | 3 |
| |
| Raw Produ | NJ | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6 (.126-.187) | pop rivet 6-6lf all_steel-3/16 x .525 rvt000212 | 474 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 8 | Plain | hex head cap screw grade 8 plain | 87 |
| |
| Raw Produ | NJ | Wood Screw | Steel | Galvanized | #14 x 1 | fastgrip sms mechanical galvanized type-17 #14 x 1 burgundy | 14 |
|
| Raw Produ | NJ | Cable Clamps & Ties | 12 | cable ties 12 120lb uv black 100/bag-11-120-uv-100 | 300 |
| ||
| Raw Produ | NJ | Machine Screw | Brass | Plain | #10-24 x 1 1/2 | brass slotted flat head ms #10-24 x 1-1/2 | 156 |
|
| Raw Produ | NJ | Cushioned Pipe & Tube Loop Clamp | Steel | Zinc/Clear | 3/4-10 | c clamps zinc 3/4-10 k8750 | 200 |
|
| QCS | OR | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/4 | 4-40x1/4 phil pan m/s stainless | 27100 |
|
| AEROSPCE | MN | Machine Screw Nut | Steel | Plain | ms21069l08 nutplate | 67 |
| |
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 440 | nas1130-04l10sf 440 1dia tangless locking strip feed | 4000 |
| |
| AEROSPCE | MN | bso-440-20zi pem .625longref#nas1129-04-b-20z blind | 2000 |
| ||||
| Fastener | OH | Socket Head Cap Screw | ASTM A574 | Plain | 1 1/2-6 x 3 | socket head cap screw 1-1/2-6x3 alloy steel | 8 |
|
| Fastener | OH | Carriage Bolt | Grade 5 | Plain | 3/8-16 x 2 1/2 | carriage bolt 3/8-16x2-1/2 gr5 plain | 78 |
|
| Fastener | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 6 | hex head cap screw 7/16-14x6 304 ss | 5 |
|
| Fastener | OH | Threaded Rod | Steel | Zinc/Clear | M12-1.75 x 1 | threaded rod m12-1.75x1 meter zinc plated | 3 |
|
| Bossard | AZ | bezel mounting strip | 6793 |
| ||||
| National | Ont | piston seal | 5 |
| ||||
| National | Ont | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/4 | 10 x 1 1/4 pan phil tyab ss | 273670 |
|
| National | Ont | Hex Head Cap Screw | Steel | Plain | M10-1.50 x 20 | m10x1.5x20 hex flan bolt | 1000 |
|
| Mansco | MI | Set Screw (Square Head) | Grade 2 | Plain | 1-8 x 2 1/2 | 1-8x2-1/2 square set scr cup pt gr2 pln case hard 10/box | 4 |
|
| Mansco | MI | Button Head Socket Cap Screw | Steel | Plain | #10-24 x 1/4 | 10-24x1/4 button hd soc cap scr pln | 117 |
|
| Mansco | MI | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 | 8-32 hex m/s nylon insert locknut nm pattern 18-8 s/s 100/box | 450 |
|
| Hodell | OH | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 6 | 6 full face red rubber hydrant gasket () | 116 |
|
| Global Fa | TX | Latches & Catches | 22/18 | 22/18 wire #6 stud block spadeuninsulated keystone electronics 8218 | null |
| ||
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 1168 |
| |
| AFI | FL | Springs (Torsion) | spring torsion () | 1251 |
| |||
| AFI | FL | Electrical Lugs & Terminals | 22-18 | butt splice 22-18awg red () | 1000 |
| ||
| AFI | FL | Self-Clinching Stud | Steel | Plain | flush-head self-clinching stud () | 1380 |
| |
| AFI | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 5/8 | #8x5/8 phil pan type-b st zn () () | 6600 |
|
| Century | FL | keb#s1375-e-100-316-ps keb# s1375-e-100-316-ps .531 +/-.010 x 1.375+/-.010 x .027 +/-10% 316 ss passivated | 620 |
| ||||
| Global Fa | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x .312 | 5/16-24x.312 ss in heli-coilininsertfree-running heli-coil 1191-5cn-0312 | 15 |
|
| Global Fa | TX | Fender Washer | Steel | Cadmium/Yellow | M8 x 25 x 2 | m8 (8.4x25x2) steelflat/washer cadii | 98 |
|
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | m2.5-.45 x 3 but soc cap alloy | 245 |
| |
| Olander | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 6-19 x 5/16 phil pan plastite stl zn | 305 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M24-3.00 | 1084-24cn600 m24-3.0 f/r heli-coil ins () () | 825 |
| ||
| Olander | CA | Set Screw (Socket Head) | Steel | Zinc/Black | #10-32 x 3/8 | 10-32x3/8 socket set oval pt stl blk zn () | 147 |
|
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M12-1.25 x 4 | 5445-12 m12-1.25 4h5h heli-coil bottoming tap () () | 1 |
| ||
| Olander | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 1 | 3/4 x 1 dowel pin sst rohs () () | 52 |
|
| Century | NY | bf83 kit | 500 |
| ||||
| Century | NY | Machine Screw | Steel | Zinc/Yellow | 10-32 x 7/8 slotted flat hd steel zi & yel zinc/yellow | 2500 |
| |
| Century | NY | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | raf m4 x 16 standoff fm2151-4007-ss m2151-4007-ss | 273 |
| |
| Century | NY | Machine Screw | Plain | an500ad4-12 | 1000 |
| ||
| Century | NY | Socket Head Cap Screw | Steel | Plain | unbrako 110048 socket head cap screw 3/8-16 x 1 | 45 |
| |
| Century | NY | Machine Screw | Steel | Zinc/Yellow | #4-40 x 1/2 | 4-40x1/2 slotted pan hd-ms steel zi & yel | 17720 |
|
| Century | NY | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 button socket cap screw 18-8 stainless steel dfars compliant | 350 |
| |
| Century | NY | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | sp-188420s washer m8 belleville washer 0.331 0.709 0.078 cots | 6 |
| |
| Century | NY | cherry cr2262-5-02 | 318 |
| ||||
| Century | NY | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3.12-1.27 x 20 | M3.12-1.27x20 pozi pan thread rolling screw 48-2 18-8 s/s | 26129 |
|
| Century | NY | Flat Washer | Black Oxide | ms15795-814b | 8 |
| ||
| Century | NY | Protective Caps & Plugs | Steel | Plain | nas1580v3t8x screw close tol | 676 |
| |
| Century | NY | keystone 7624 | 401 |
| ||||
| Century | NY | Flat Washer | 316, 317, A4 Stainless | Passivated | nas620-c4 316 stainless steel passivated 2.92 id x 5.31 od x 0.81 th | 3689 |
| |
| Century | NY | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | sps 50faf-1011 5/8-11 flexloc nut stainless steel | 1 |
| |
| Century | NY | 8 x 11 1/2 self-seal bubble bags u-line u-line | 450 |
| ||||
| Century | NY | Socket Head Cap Screw | ASTM A574 | Plain | 8-32 x 1/4 socket cap alloy stl | 273 |
| |
| Century | NY | cherry cr2673fa-4-02 | 500 |
| ||||
| Century | NY | Electrical Lugs & Terminals | amp 36158 ring terminal insulated amp products 36158 amp products 36158 amp products 36158 amp products 36158 | 488 |
| |||
| Century | NY | carr-lane p326.3160 | 10 |
| ||||
| Hodell | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | 1/4-20x1/2 phil truss m/s 18-8 ss () | 5025 |
|
| Komar | IL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 | 10-32x1 hex head cap screw 18-8 ss | 80 |
|
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #10-16 x 1 1/2 | #10-16 x 1-1/2 self-piercing screws, 1/4 tall indented hex wide washer(.400 od) head unslotted, fillet under head, twin lead, hi-lo thread, type 17 point, steel cer silver 1000hr, head painted madden dessert tan | 16,000 |
|
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Zinc/Clear | #10-12 x 1 | #10-12x1 self-piercing screw 1/4 indented hex washer head slotted twin lead full thread sharp point carbon steel zinc plated | 9,000 |
|
| Fastener | OH | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-16 x 3/4 | 6-lobe pan high low screw 10-16x3/4 ft zinc plated | 3900 |
|
| Fastener | OH | Machine Screw | Steel | Zinc/Clear | 3/8-16 x 1 1/2 | slotted flat machine screw 3/8-16x1-1/2 zinc | 600 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Black | #6-32 x 1/2 | 6-32 x 1/2 unslotted indented hex washer head trilobe thread forming screw steel case hardened trivalent black 96hr salt spray to white/120hr to red zinc/bake/wax rohs compliant | 10000 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 3/32 x 1 5/16 | 100 degree countersink 2117-t4 aluminum i/a/w rev 3 3/32 x 1-5/16 clear anodize/mil-a-8625 MS20426AD3-21A | 27.5 |
|
| Rapid | NY | Solid Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3/32 x 15/16 | 100deg.countersink inconel 600 per as7232 i/a/w rev c 3/32 x 15/16 annealed AN123681 | 8.6 |
|
| Rapid | NY | Drive Pin Rivet, Pin Grip Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 100 | NAS9302B-5-10 | 16214 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 1/8 x 5/16 | 100 degree countersink 5056-h32 alum. i/a/w rev 3 1/8 x 5/16 clear anodize/mil-a-8625 MS20426B4-5A | 1.81674097926644 |
|
| Rapid | NY | Blind Rivet | Aluminum | Anodized | avex bulbex lo-prof.blind rivet all-alum 3/16x.040-.354 grip-black anodized | 1454 |
| |
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 1/8 x 7/32 | universal head 2117-t4 aluminum i/a/w rev 2 1/8 x 7/32 clear anodize/mil-a-8625 MS20470AD4-3A5 | 131.5228 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 3/8 x 1 1/4 | universal head 5056-h32 aluminum i/a/w rev 2 3/8 x 1-1/4 gold chem film-mil-dtl-5541 MS20470B12-20 | 0.27 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 3/16 x 9/16 | 100 degree countersink 2117-t4 aluminum i/a/w rev 3 3/16 x 9/16 dichromate anod.-mil-a-8625 MS20426AD6-9D | 4.5774 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 82 | 82deg.mod.index hd.2117-t4 alum. rev.ae 3/16x13/16 finish anodize mil-a-8625 | 2.8657 |
|
| Rapid | NY | Blind Rivet | Aluminum | Plain | 1/8 x .563-.625 | 100countersink 5056 alum.blind self-plugging 1/8 x .563-.625 grip i/a/w rev 2 orange anod MS20601B4W10 | 100 |
|
| Rapid | NY | Solid Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Cadmium | 416 | 100deg.countersink.flush shear hd.monel i/a/w rev 12 3/32 x 3/8 qq-n-281 cadmium qq-p-416 NAS1200M3-6P | 9.9624 |
|
| Hodell | OH | External Type E Retaining Ring (E-Clip) | Steel | Plain | 1/2 | 1/2 e-ty ret ringtri/zi/clr to prt | 675 |
|
| Delta | TX | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 1/4-20 x 3 1/2 | c/s | 1358 |
|
| Fastener | OH | Cable Clamps & Ties | Steel | Zinc/Clear | tie-cable non-locking 20.1 l blk polypro weath.res/hd [rohs] | 200 |
| |
| Hodell | OH | F436 Round Structural Washer | Steel | Plain | 1 1/2 | 1 1/2 f436 flat type-3 plain | 582 |
|
| Hodell | OH | Fully Threaded Stud (All Thread) | Steel | Plain | 1/2 x 6 1/8 | 1/2x6 1/8 neslon stud w/fer | 10 |
|
| Hodell | OH | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/4-20 | 1/4-20 u nut eco-guard | 390 |
|
| EFC | MO | Rivet Screw (Rivscrew etc.) | Aluminum | Plain | .125 | rivet chob .125d .063-.125gr lphillips al emhart teknologies llc 1162-0406 | 1500 |
|
| Pac Bolt | BC | Split Cotter Ring, Split Ring, Ring Cotter, Rue Ring | Steel | Plain | 4 | 4 split rings b/m | 7762 |
|
| Arden | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 | M4 fw a2ss din 433 | inquire |
|
| Arden | WI | Sems Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | Zinc/Clear | 1 x 5/8 | 1420x5/8 phillips pn ms intsems zc | inquire |
|
| Arden | WI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5811 x 5 | 5811x5 hxcs gr5 zc | inquire |
|
| Arden | WI | Hex Head Cap Screw | Grade 5 | Black Oxide | 1420 x 1/2 | 1420x1/2 hcs gr5 ext sems blk | inquire |
|
| BHAM | AL | Valves & Accessories | Steel | Plain | generant check valve | 4 |
| |
| FDL | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Zinc/Yellow | 1/2-13 | 1/2-13 prevailing lock nut grade b steel zinc yellow plated per drawing#006-125-00 1000pcs/ctn & 17kgs/ctn b18.2.2 | 12000 |
|
| THRDFAST | AL | Set Screw (Socket Head) | Steel | Plain | 3/8-16 x 2 | socket set cup pt b18.3 | 5 |
|
| THRDFAST | AL | Finished Hex Nut | Titanium | Plain | 5/16-18 | hex nut b18.2.2 | 8 |
|
| THRDFAST | FL | Heavy Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | 18-8 ss heavy hex jam nut b18.2.2 | 15 |
|
| THRDFAST | FL | Steel | Galvanized | 3/16 x 24 | wire rope hdg eye to stop | 12 |
| |
| THRDFAST | OK | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 1/2 | slotted round m/s b18.6.3 | 50 |
|
| Valley Nu | WA | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 3/4-10 x 48 | 316ss usa all thread stud | 20 |
|
| Valley Nu | WA | Finished Hex Nut | Grade 5 | Zinc/Black | 9/16-18 | nf gr5 hex nut zb import | 25 |
|
| Valley Nu | WA | Lag Screw | Steel | Plain | 5/8 x 6 | hex lag | 16 |
|
| Valley Nu | WA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 1/2 | nc 18-8 ss flat phil | 15 |
|
| Valley Nu | WA | Dowel Pin | Steel | Plain | M6 x 16 | 266 |
| |
| Valley Nu | WA | Hex Machine Bolt | Steel | Plain | 3/4-10 x 2 | nc h/b | 78 |
|
| Valley Nu | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Black | #10 x 1 1/4 | flat phil sms zb | 127 |
|
| Valley Nu | WA | Dowel Pin | Steel | Plain | M6 x 36 | 98 |
| |
| Valley Nu | WA | Machine Screw | Steel | Zinc/Black | 1/4-20 x 3 1/2 | nc round slotted zb | 5 |
|
| Valley Nu | WA | Hex Head Cap Screw | Grade 8 | Plain | 7/8-9 x 1 3/4 | nc gr8 hex c/s pl usa | 42 |
|
| Lightning | LA | Heavy Hex Nut | Grade 2H | Zinc/Yellow | 3/4-10 | astm a194 gr. 2h heavy hex nut | 10514 |
|
| Lightning | LA | F436 Round Structural Washer | Steel | Plain | 5/8 | f436 flat | 3205 |
|
| Lightning | LA | Heavy Hex Nut | Grade 2H | Plain | 5/8-11 | astm a194 2hm heavy hex nut | 1634 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 7/8-9 x 14 | astm a193 b7m all thread stud | 684 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/2-8 x 10 1/4 | 1-1/2-8x10-1/4 astm a320 l7 all thread stud tfe black | 343 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
