FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| AIH | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M4 x 6 | m4 x 6 pan head torx stl t/f/s zinc | 4287 |
|
| AIH | AZ | Cable Clamps & Ties | Steel | Black Oxide | mini locking cable tie nylon black heat stabilized | 1239 |
| |
| AIH | AZ | clamp tie 6.1l (155mm) #8 (m4) screw | 984 |
| ||||
| AIH | AZ | Grommets & Eyelets | grommet | 225 |
| |||
| AIH | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | .50 x 1.00 x .05 | spring bellevillle washer .50 id x 1.00 od x .05 thk | 718 |
|
| AIH | AZ | Swage Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-.188 x 1/2 | 1/4in-.18-8 304 s/sx1/2in swage standoff al | 18435 |
|
| AIH | AZ | Set Screw (Socket Head) | Steel | Plain | #6-32 x 1/8 | socset nylon tip-1/32 | 100 |
|
| AIH | AZ | Flat Washer | Steel | Zinc/Clear | #4 | type-b flat | 7000 |
|
| AIH | AZ | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1/8 (#10-32) | soc shoulder set screw s/s | 200 |
|
| AIH | AZ | Fully Threaded Stud (All Thread) | Brass | Plain | baby stud | 7631 |
| |
| AIH | AZ | Wood Screw | Steel | Galvanized | .375 x 2 1/20 | wood l stl | 1700 |
|
| AIH | AZ | Square Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 | square nut s/s | 100 |
|
| AIH | AZ | Swage Standoff | Brass | Plain | 1/4 | round swage standoff w/solder plate | 109 |
|
| AIH | AZ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M10-1.50 x 45 | hex c/s 316 s/s | 103 |
|
| AIH | AZ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 12 | hex c/s s/s | 300 |
|
| AIH | AZ | External Push-On Shaft Retainer | Steel | Zinc/Clear | push ring 3/16 id st znc | 1000 |
| |
| AIH | AZ | Round Spacer | Nylon (Polyamide) | Plain | tube spacer 2mm l 2.2mm od | 10272 |
| |
| AIH | AZ | Swage Standoff | Aluminum | Plain | 1/4 | swage round standoff | 517 |
|
| AIH | AZ | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/4 | hex m/f standoff s/s | 136 |
|
| AIH | AZ | Curved/Wave Spring Washer | Steel | Plain | 1/4 x 0.269 x 0.423 | 1/4x0.269 id 0.423 od wave wash st | 199 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #8 | EXTERNAL TOOTH COUNTERSUNK | 1,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #10 | EXTERNAL TOOTH COUNTERSUNK | 2,700 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #8 | EXTERNAL TOOTH | 5,030 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #10 | EXTERNAL TOOTH | 1,100 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1/4 | EXTERNAL TOOTH COUNTERSUNK | 4,000 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4 | EXTERNAL TOOTH | 1,000 |
|
| GUIDON | NJ | Flat Washer | Brass | Plain | #6 ID x 3/8 OD x .032 THK | 6L | 5,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1/4 | EXTERNAL TOOTH | 7,000 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 7/16 | EXTERNAL TOOTH | 300 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1 | EXTERNAL TOOTH | 1,000 |
|
| GUIDON | NJ | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | .990 ID x 2 OD x .093 THK | edpm flat washer | 450 |
|
| GUIDON | NJ | Flat Washer | Fiber | Plain | #10 ID x 1/2 OD x .062 THK | black fibre washer | 700 |
|
| GUIDON | NJ | Countersunk Finishing Washer | Steel | Nickel Plated | #12 | 100 |
| |
| GUIDON | NJ | Countersunk Finishing Washer | Steel | Nickel Plated | 1/4 | 2,896 |
| |
| GUIDON | NJ | Fender Washer | Steel | Zinc/Clear | #8 x 7/8 | 862 |
| |
| GUIDON | NJ | Flat Washer | Brass | Plain | #10 ID x 7/16 OD x .036 THK | 10S | 17,695 |
|
| GUIDON | NJ | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 11/16 | 100 |
| |
| GUIDON | NJ | Flat Washer | Brass | Nickel Plated | #10 x 7/16 x .032 THK | 10S | 280 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
