DIN 705 Shaft Collar, form A by Material, Finish and Size

A shaft collar is a simple, ring-shaped mechanical component that fits around a shaft. Its main purposes are to hold, position, or locate other components on the shaft, such as bearings, sprockets, or gears, and to act as a mechanical stop. Shaft collars are commonly used in power transmission, automation, and machinery. They can be secured to the shaft using set screws, clamps, or other mechanisms. An adjusting ring (in mechanical contexts, sometimes called an adjustment ring or grade adjustment ring) is a ring-shaped component used to fine-tune the position or spacing of parts.

Search thousands of Metric fasteners by DIN specification, including DIN 705 Shaft Collars, in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

DIN 705 Shaft Collars by Metric Sizes

Shaft Collars are available on the FCH Network with metric diameters that range from M4 to M70, and with metric lengths that range from M4mm to mm.

Click on the metric diameters or lengths below to view, or
Shop All DIN 705 Shaft Collars
Metric Lengths
    DIN 705 Shaft Collars by Materials

    DIN 705 Shaft Collars are available on the FCH Network in materials that range from Steel to 300 Stainless (A1,A2, 18-8,304,310 etc.).

    Click on the materials below to view or Shop All DIN 705 Shaft Collars
    DIN 705 Shaft Collars by Coatings/Finishes

    DIN 705 Shaft Collars are available on the FCH Network in finishes or coatings that range from Plain to Zinc/Clear.

    Click on the finishes below to view or Shop All DIN 705 Shaft Collars