DIN 662 Mushroom Head Solid Rivet by Material, Finish and Size

Solid Rivets are the oldest and simplest type of rivet, their use going back to Ancient Egyptian times. Like all rivets, their purpose is to tightly clamp two pieces of material together. A solid rivet consists of a smooth cylindrical shaft, with a flat or rounded head on one end. Unlike a blind rivet, free access to both sides of the joint is required. The rivet is placed in a pre-drilled hole, and the tail end of the rivet is deformed by pressure until the pieces are tightly clamped together. Blind rivets are extensively used in steel construction, ship building, aeroplane construction.

Search thousands of Metric fasteners by DIN specification, including DIN 662 Solid Rivets , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

DIN 662 Solid Rivets by Metric Sizes

Solid Rivets are available on the FCH Network with metric diameters that range from M4 to M4, and with metric lengths that range from 10mm to 10mm.

Click on the metric diameters or lengths below to view, or
Shop All DIN 662 Solid Rivets
Metric Diameters
Metric Lengths
DIN 662 Solid Rivets by Materials

DIN 662 Solid Rivets are available on the FCH Network in materials that range from Steel to Steel.

Click on the materials below to view or Shop All DIN 662 Solid Rivets
DIN 662 Solid Rivets by Coatings/Finishes

DIN 662 Solid Rivets are available on the FCH Network in finishes or coatings that range from Plain to Plain.

Click on the finishes below to view or Shop All DIN 662 Solid Rivets