DIN 32501 Weld Screws, Weld Studs with external thread by Material, Finish and Size

Resistance or Projection Weld Studs can come in a variety of shapes depending on the application, but the common factor is that the welding process is accomplished by passing a current through the weld stud into the base material. The current heats the stud and base, and usually pressure is applied. Many of these types of studs have small projections on the underside of the stud to concentrate the current.

Search thousands of Metric fasteners by DIN specification, including DIN 32501 Resistance Weld Studs, in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

DIN 32501 Resistance Weld Studs by Metric Sizes

Resistance Weld Studs are available on the FCH Network with metric diameters that range from M3 to M10, and with metric lengths that range from 8mm to 60mm.

Click on the metric diameters or lengths below to view, or
Shop All DIN 32501 Resistance Weld Studs
Metric Diameters
Metric Lengths
DIN 32501 Resistance Weld Studs by Materials

DIN 32501 Resistance Weld Studs are available on the FCH Network in materials that range from Steel to 300 Stainless (A1,A2, 18-8,304,310 etc.).

Click on the materials below to view or Shop All DIN 32501 Resistance Weld Studs
DIN 32501 Resistance Weld Studs by Coatings/Finishes

DIN 32501 Resistance Weld Studs are available on the FCH Network in finishes or coatings that range from Plain to Copper.

Click on the finishes below to view or Shop All DIN 32501 Resistance Weld Studs