ANSI B18.8.2 Grooved Pins by Material, Finish and Size

Grooved Pins, or just Groove Pins, are solid non-threaded press-fit pins that have grooves running axially along their surface. Since the grooves are swaged, material is displaced, increasing the diameter of the pin. As the pin is forced into a hole, the grooves close and the pin locks in place. Grooved pins have good anti-vibration performance.

Search thousands of US/Imperial fasteners by ANSI specification, including ANSI/ASME b18.8.2 Grooved Pins , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

ANSI/ASME b18.8.2 Grooved Pins by Imperial/ Sizes

Grooved Pins are available on the FCH Network with imperial diameters that range from 1/8 to 1 3/8, and with lengths that range from 7/16 to 1 3/4.

Click on the lengths below to view or Shop All ANSI/ASME b18.8.2 Grooved Pins
Imperial/US Diameters
Imperial/US Lengths
ANSI/ASME b18.8.2 Grooved Pins by Materials

ANSI/ASME b18.8.2 Grooved Pins are available on the FCH Network in materials that range from Steel to Aluminum.

Click on the materials below to view or Shop All ANSI/ASME b18.8.2 Grooved Pins
ANSI/ASME b18.8.2 Grooved Pins by Coatings/Finishes

ANSI/ASME b18.8.2 Grooved Pins are available on the FCH Network in finishes or coatings that range from Plain to Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.).

Click on the finishes below to view or Shop All ANSI/ASME b18.8.2 Grooved Pins