FCH News

Buy from one of our FCH Network Members
SupplierLocTypeMaterialFinishSizeDescriptionQty 
CenturyFLCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)SteelM1-12 x 801 x 12 x 80 grit a/o belt2492
    Contact_Supplier
CenturyFLMachine TapsSteelZinc/Clear3/8-16 x 6 1/23/8-16 x 6 1/2 hx tap full thread gr5 zinc50
    Contact_Supplier
CenturyFLCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel1/2 x 1214-1358 1/2 x 12 sand belt rev 3 14-1358 1/2 x 12 sand belt resin bond alum oxide bias joint or butt joint 180 grit rev 3834
    Contact_Supplier
CenturyFLCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel1/2 x 2414-1378 1/2 x 24 sand belt rev 3 14-1378 1/2 x 24 sand belt resin bond alum oxide bias joint or butt joint 180 grit rev 3140
    Contact_Supplier
CenturyFLMachine TapsSteel4scotch 4dyw4 splicing tap24
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteelNickel Plated#2#2 phillips hex driver bit 6 length steel/nickel platedinquire
    Contact_Supplier
BrikksenFLMachine TapsSteel1 1/81/2 flat washer 1-1/8 od .1875 thk med carb stl heat treat/lt oil tap w 1/2-13 thread per printinquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteelT27t-27 torx security driver bitinquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel5/325/32 hex security driver bit2000
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel#2#2 phillips hex driver bit 6 length steel 1150p2ainquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel#3#3 (5/16 diameter) frearson (r&p) power bit 2.75 long 1/4 hex drive 10 per bag-generic brandinquire
    Contact_Supplier
BrikksenFLMetal Drill BitsSteel1/21/2 black & gold hss jobber drill bit 206us3264inquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteelNickel Plated1 7/8#1 phillips hex driver bit 1-7/8 length steel/nickel platedinquire
    Contact_Supplier
BrikksenFLMetal Drill BitsSteel3/163/16 black & gold hss jobber drill bitinquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel#2#2 phil pwr bit 2 oalinquire
    Contact_Supplier
BrikksenFLMetal Drill BitsSteel3/163/16 jobber drill bit 135 deg split pt (206sp1264)inquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel2 3/4#2 phil pwr bit 2-3/4inquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel2 3/4#3 square driver bit (long) 2-3/4 long 1/4 hex drive 10 per small bag 5 small bags per master pack-generic brandinquire
    Contact_Supplier
BrikksenFLMachine TapsSteel1/4-201/4-20 weld nut tap proj ss part # snz2113inquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteelNickel Plated#3#3 phillips hex driver bit 6 length steel/nickel platedinquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel#1#1 phillips hex driver bit 6 length steelinquire
    Contact_Supplier
BrikksenFLMetal Drill BitsSteel7/167/16 black & gold hss jobber drill bitinquire
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel2 3/4#2 phil pwr bit 2-3/4400
    Contact_Supplier
Marshall nullHole Saws66l hole saw arbor3
    Contact_Supplier
SWACOOHCountersink CuttersSteelbolt protruding head512
    Contact_Supplier
SWACOOHCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel37 x 6069957329019 37 x60 belt 80 grit r8236
    Contact_Supplier
GLFOHMetal Drill BitsSteel0.196#9 split pt nitro drill bit hss brz/blk1
    Contact_Supplier
GLFOHMetal Drill BitsSteel5/645/64 135 split pt nitro drill bit hss brz/blk36
    Contact_Supplier
GLFOHMetal Drill BitsSteel7/327/32 heavy duty-jobber drill6
    Contact_Supplier
GLFOHCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel1/2-20 x 13/161/2-20 x 13/16 60-deg rh hex wheel nut stl zc370
    Contact_Supplier
GLFOHMetal Drill BitsSteel15/6415/64 135 split pt nitro drill bit hss brz/blk65
    Contact_Supplier
GLFOHMetal Drill BitsSteel13/1613/16 118 split pt reduced shank drill bit hss blk/gold4
    Contact_Supplier
GLFOHMetal Drill BitsSteelM1.501.50mm kobalt-jobber drill1
    Contact_Supplier
GLFOHBattery PacksSteelbatteries aaa48
    Contact_Supplier
BossardAZAdapters, Arbors, & MandrelsM4M4 mandrel for riv790 tool6
    Contact_Supplier
BossardAZCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steeldisc 2 80 grit norzon r821 norton abrasives50
    Contact_Supplier
NAPPCOTXStep Drill Bits (Unibit etc.)Steel#3#3 1/4 to 3/4 ti coated step drill4
    Contact_Supplier
NAPPCOTXAdapters, Arbors, & MandrelsSteelmaleadaptermnpt 1/2 thread polypropylene 10
    Contact_Supplier
NAPPCOTXMasonry & Concrete Drill BitsSteel3/16 x 4 5/83/16x4-5/8 oal sds masonry drill delta4
    Contact_Supplier
NAPPCOTXSaw BladesSteel3/4hybrid x 1 x .035 3/4tpi blade 14 63
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel#1#1 square driver bit 2 long 1/4 hex drive 1 per bag 5 bags per masterpack-generic brandinquire
    Contact_Supplier
OptimasILMachine Diesflux die-attach 10cc syringe single release light amber clear gel sold per 10cc syringe25
    Contact_Supplier
American WICountersink CuttersSteel1 1/8-7 x 61-1/8-7x6 nc coupling bolt gr 2 (80 finish)9
    Contact_Supplier
American WICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel9 x 1/8 x 7/89 x 1/8 x 7/8 bore ultimate pipeline wheel type-27 aluminum oxide25
    Contact_Supplier
American WIMetal Drill BitsSteel1/21/2 hose x 1/2 male npt straight bitelock 1-pc crimp fitting16
    Contact_Supplier
American WIMetal Drill BitsSteel3/83/8 hose x 3/4-16 jic fem 90 deg bitelok 1-pc crimp fitting w/swivel64
    Contact_Supplier
American WIImpact Socket DriversSteelidh wireless charging kit-18v brushless socket ready impact driver w/wireless battery charger & frame in carrying bag2
    Contact_Supplier
American WIHole SawsSteel1 3/41-3/4 lenox bi-metal hole saw boxed 28l10
    Contact_Supplier
Empower HILMachine DiesSteelNickel Plated2np73402nickel plated steel snap bodiesopening size 1/4 overall length 249950
    Contact_Supplier
Empower HILMetal Drill Bits300 Stainless (A1,A2, 18-8,304,310 etc.)2 1/2ssbs424212stainless steel bit snapsize 5/16 length 2-1/2500
    Contact_Supplier
UNEEDANJNut Driving Bits, Nutsetters1/41/4 magnetic bit holder47
    Contact_Supplier
AFT FasteTXMetal Drill Bits1/21/2 jobber general purpose bit24
    Contact_Supplier
AFT FasteTXMetal Drill Bits23/6423/64 jobber bit 118 degree general purpose30
    Contact_Supplier
AFT FasteTXCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)M10silicon carbide waterproof discs-psa with tabs-5xno dust holes grit 1000c mercer abrasives 522m10 (100/pkg.)1
    Contact_Supplier
AFT FasteTXBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)33m silver cut-off wheel 60 grit 87458 t1 3 inx.035 inx3/8 in (qty. 50)3
    Contact_Supplier
AFT FasteTXCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)sanding disc 5 80g100/box 23-332-08016
    Contact_Supplier
AFT FasteTXCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)sanding discs psa 180 grit gold 100/bx2
    Contact_Supplier
AFT FasteTXCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)multi-purpose emery cloth sandpaper sheets 9x15 grit 80 mercer abrasives 216080 (50/pkg)2
    Contact_Supplier
AFT FasteTXSaw BladesAluminum4 1/2 x 24-1/2x2mmx7/8 aluminum cutting tungsten carbide blade1
    Contact_Supplier
AFT FasteTXMachine DiesSteelM16 x 2.00M16x2.00 hi-carbon steel die type 790-hex norseman drill #ndt-842008
    Contact_Supplier
AFT FasteTXMetal Drill Bits11/3211/32 jobber bit 118 degree general purpose36
    Contact_Supplier
AFT FasteTXMetal Drill Bits1/41/4 solid carbide point straight flute drill bit usa2
    Contact_Supplier
AFT FasteTXMetal Drill Bits7/167/16 pilot point w/3/8 shank drill bit6
    Contact_Supplier
AFT FasteTXMachine TapsSteel#12 x 28#12x28 hi-carbon steel tap type 761-bottoming (3/pkg.) norseman drill 5622010
    Contact_Supplier
CIFILMachine TapsSteelM50-70m50 x 70 pivot pin with m16 x 2.0 x 48 drill and tap per print 6061 aluminum plain4047
    Contact_Supplier
Surpless,ILMetal Drill Bits1/4skt hex bit 1/2dr 1/4 (1 pc per box)1
    Contact_Supplier
AIHAZinsert screw-thread30
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteel#2 x 1#2 x 1 square driver bits 1/4 hexinquire
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteell xl5 | champion drill bit brute platinum12
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteel13/3213/32 champion 1705 | hss hd stub drill10
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteel5/16 x 65/16 x 6 #0619 | rawl ind gr mas dril1
    Contact_Supplier
Alma BoltMIDeburring BitsSteel1/2sg-56 1/2 tree point end bur | carbide burs2
    Contact_Supplier
Alma BoltMINut Driving Bits, NutsettersSteel7/16 x 1 5/8#94172 7/16 x 1 5/8 magnetic | insert nutsetter15
    Contact_Supplier
Alma BoltMICountersink CuttersSteel1/21/2 inter counterbore ss |1
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteel0.199#8 champion 1705 | hd numbered stub drill4
    Contact_Supplier
Alma BoltMIScrewdriving Insert Bits & Power BitsSteel#1 x 2#93203 #1 x 2 sq. recess | power bit8
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteelj xgo champion | hss black & gold bit9
    Contact_Supplier
Alma BoltMIHole SawsSteel7/161 7/16 champion ct5 | carbide tip hole saw5
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteel#47#47 xgo champion | hss black & gold bit10
    Contact_Supplier
Alma BoltMIMachine TapsSteel7/8-147/8-14 champion 308 | high speed steel bottom tap2
    Contact_Supplier
Alma BoltMIMachine TapsSteel1/4-28#915550gf 1/4-28 taper hex hd | grease fitting plug50
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteel0.191#11 xgo champion | hss black & gold bit10
    Contact_Supplier
Alma BoltMIScrewdriving Insert Bits & Power BitsSteel3w3 tri wing | tamper proof bit10
    Contact_Supplier
Alma BoltMICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steelsait-lok-r 3 dia 50gt 3a | alum ox laminated disc23
    Contact_Supplier
Alma BoltMIMachine TapsSteel7/16-207/16-20 champion 308 | high speed steel bottom tap3
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteel#41#41 xgo champion | hss black & gold bit10
    Contact_Supplier
Alma BoltMICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel1/24 1/2 flap disc 60gt 5/8-11h | encore plus+2
    Contact_Supplier
Alma BoltMICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steelsait-lok-r 3 dia 80gt 3a | alum ox laminated disc25
    Contact_Supplier
NutsBoltsNEBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)Steela-9 alum cutting oil gal.4
    Contact_Supplier
EmpireWAScrewdriving Insert Bits & Power Bitst-27 vandlpf torx bit tip (1/41
    Contact_Supplier
EmpireWAMetal Drill Bits712 7/8#712 -7/8 s&d drill1
    Contact_Supplier
EmpireWAMetal Drill Bitsixl5 jobber drill display1
    Contact_Supplier
EmpireWA# x 5 9/32#xl5-9/32 brute 2 pc ipac1
    Contact_Supplier
EmpireWAReciprocating Saw Bladesrecip saw wall display1
    Contact_Supplier
EmpireWAReciprocating Saw Blades1212 straight 18t b/m recip3
    Contact_Supplier
EmpireWA# x 5 1/4#xl5-1/4 brute 2 pc ipac1
    Contact_Supplier
EmpireWAScrewdriving Insert Bits & Power Bits#8-18 x 1/28-18 x 1/2 pan sq drive drill3000
    Contact_Supplier
EmpireWAMetal Drill Bits7006 1/4 x 67006-1/4x6 aircraft ext.dril33
    Contact_Supplier
EmpireWABell Hanger Wood Drill Bits3/8 x 243/8 x 24 bellhanger drill3
    Contact_Supplier
EmpireWAScrewdriving Insert Bits & Power Bits#8-12#8-12 slotted insert bit 116
    Contact_Supplier
EmpireWAMasonry & Concrete Drill Bits3/8 x 4 x 63/8 x 4 x 6 sds plus hammr bit35
    Contact_Supplier
EmpireWA#302 1/2-13#302 -1/2-13t taper tap12
    Contact_Supplier
EmpireWAMetal Drill Bits#705-29#705 -29 h.s. jobber drill12
    Contact_Supplier
EmpireWAMetal Drill Bits#705 1/2#705 -1/2 h.s. jobber drill10
    Contact_Supplier
EmpireWA# x 5 11/32#xl5-11/32 brute 2 pc ipac1
    Contact_Supplier
EmpireWAMachine DiesSteel#330#330 10-32 carbon stl hex die1
    Contact_Supplier
EmpireWA# x 5 5/32#xl5-5/32 brute 2 pc ipac1
    Contact_Supplier
EmpireWAHole Sawshole saw wall display1
    Contact_Supplier
EmpireWAMetal Drill Bitsxl28-1/4 brute mech leng bit12
    Contact_Supplier
Raw ProduNJMachine TapsSteeltaper taps hss 20e156ct-7/8-9 unc ctd 550711
    Contact_Supplier
Raw ProduNJMachine TapsSteeltaper taps hss 20e136ct-9/16-12 unc ctd 550117
    Contact_Supplier
Raw ProduNJMachine TapsSteeltaper taps hss 20e003ct-#3-48 unc ctd 712515
    Contact_Supplier
Raw ProduNJMachine TapsSteeltaper taps hss 20e002ft-#2-64 unf ctd 717317
    Contact_Supplier
Raw ProduNJMetal Drill BitsSteelZinc/Clear#10 x 2 1/2pro-z zp cap mini-driller point-charcoal-#10 x 2-1/2500
    Contact_Supplier
Raw ProduNJMachine TapsSteeltaper taps hss 20e010ct-#10-24 unc ctd 6108140
    Contact_Supplier
Raw ProduNJScrewdriving Insert Bits & Power BitsSteel1/4hex tamper proof bit alloy 1/49
    Contact_Supplier
Raw ProduNJScrewdriving Insert Bits & Power BitsSteel9/64hex tamper proof bit alloy 9/647
    Contact_Supplier
Alma BoltMIScrewdriving Insert Bits & Power BitsSteelT25t-25 torx driver complete | tamperproof toolsnull
    Contact_Supplier
Alma BoltMIBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)Steel14 x 1/8 x 1 a2414 x 1/8w x 1 b type-1 a24r | stationary saw cut-off wheelnull
    Contact_Supplier
BrikksenFLScrewdriving Insert Bits & Power BitsSteelT27t-27 torx security driver bitinquire
    Contact_Supplier
QCSORBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)4 x 5/84x5/8 t27 z3-80 (xl) camel grinding wheels1
    Contact_Supplier
QCSORMetal Drill Bits27/6427/64 hs jobber drill bit oxide6
    Contact_Supplier
QCSORCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Aluminum2 x 422x42 sanding belt 80 grit zirconia alumina vsm abrasives4
    Contact_Supplier
AEROSPCEMNCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)Steel807000118902 3m corp. 3m 348d cloth disc 80 grit250
    Contact_Supplier
F. SolutionsOHMetal Drill BitsSteelBlack Oxide29/6429/64 jobber length drill bit high speed steel black and gold12
    Contact_Supplier
F. SolutionsOHCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)SteelZinc/Clear80flap disc standard t27 4-1/2 x 5/8-11 80 grit zirconia |200
    Contact_Supplier
F. SolutionsOHAbrasive Mounted Pointscore temp mounted points (cotton fiber) w222 1 x 2 x 1/4 shank 5
    Contact_Supplier
F. SolutionsOHMetal Drill BitsSteelBlack Oxide11
    Contact_Supplier
Wurth IndINMetal Drill BitsSteelBlack Oxide5/16dbit 5/16 hss 118 jobber blk oxide steel black oxide16
    Contact_Supplier
NationalOntCountersink CuttersSteel3/8-2 1/83/8-2 1/8 bolt16500
    Contact_Supplier
NationalOntScrewdriving Insert Bits & Power BitsSteel#6 x 1/4#6x1/4 spanr ins driver bit 1 lg200
    Contact_Supplier
WINAMNMetal Drill BitsClass 10.9Black OxideM10dbit 10 hss 118 jobber blk oxide38
    Contact_Supplier
ManscoMIBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)6 x 1/4 x 7/86x1/4x7/8 gemini grinding wheel type-27 a/o 20/box20
    Contact_Supplier
ManscoMICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)3 x 60grit blaze mini flap disc ty-s poly c/a 10/box40
    Contact_Supplier
ManscoMINut Driving Bits, Nutsetters8mmx152mm oal magnetic nutsetter2
    Contact_Supplier
ManscoMIScrewdriving Insert Bits & Power BitsSteel3/32 x 1/4 x 13/32 x 1/4 x 1 ball end insert bit 10/box10
    Contact_Supplier
ManscoMICountersink CuttersSteelZinc/Clear1/4-20 x 2.75 oal handle mounting bolt triv znc11
    Contact_Supplier
ManscoMIBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)14 x 5/32 x 114x5/32x1 gemini cut off wheel ty-01 a/o 2-ply for decking 10/box60
    Contact_Supplier
ManscoMIBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)5 x .045 x 7/85x.045x7/8 87467 t1 3m silver cut-off wheel100
    Contact_Supplier
ManscoMICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)43 x 75 x 60grit metalite sanding belt x-wt cotton a/o 6/box6
    Contact_Supplier
ManscoMIMetal Drill BitsSteelBlack Oxide#36#36 135 deg hss nitro jobber length drill blk & gold usa 12/box12
    Contact_Supplier
ManscoMIMetal Drill Bits23/6423/64 135 deg hss jobber length drill tin tipped 6/box6
    Contact_Supplier
ManscoMIMetal Drill BitsSteelBlack Oxide15/3215/32 135 hss nitro mechanic length drill blk & gold w/3 flats usa 6/box6
    Contact_Supplier
ManscoMICoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)7 x 7/8 x 60grit blaze flap disc type-29 y-wt poly c/a 10/box10
    Contact_Supplier
AFIFLCountersink CuttersSteelZinc/Clear5/16-185/16-18 corner bolt steel zinc ()1000
    Contact_Supplier
F. SolutionsOHSaw BladesSteeldiablo steel demon ferrous metal-cutting circular saw blade 14in.x72t3
    Contact_Supplier
F. SolutionsOHSaw Bladessaw blade 12 80 tooth carbide tip fine finish dewalt2
    Contact_Supplier
F. SolutionsOHMetal Drill BitsSteelBlack Oxide3/163/16 hss black & gold jobber length drill bit9
    Contact_Supplier
HodellOHCoated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.)6 x 1/26x1/2 maroon vf hs arbor hole surfacecond disc200
    Contact_Supplier
HodellOHHole Saws1 1/4 4/6 tooth bi metal hole saw9
    Contact_Supplier
HodellOHBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)44 cut off wheel 5/8hole dia.50
    Contact_Supplier
ASFCORPMIMetal Drill BitsSteelBlack Oxide.242.242 letter c hss 118 deg jobber drill bit black oxide6
    Contact_Supplier
THRDFASTMSAnnular Cutters7/8 x 2annular cutter1
    Contact_Supplier
THRDFASTOKBonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.)5 x 7/8 x 3/32 a24r cutting wheel50
    Contact_Supplier
THRDFASTMSMachine Taps9/16-129/16-12 plug tap nitro7
    Contact_Supplier
THRDFASTFLDiamond Saw Blades114x.125x1 general purpose (dry) diamond blade1
    Contact_Supplier
THRDFASTMSMetal Drill Bits11/2 red. shank drill bit (3/8in)14
    Contact_Supplier
THRDFASTFLMachine Taps#10-32hs plug tap with #21 xgo drill bit4
    Contact_Supplier
THRDFASTFLMetal Drill Bits#41h.s. jobber drill bit7
    Contact_Supplier
THRDFASTFLDrill Chucks1/4quick-change chuck2
    Contact_Supplier
THRDFASTALMetal Drill Bits5/32double end drill bit12
    Contact_Supplier
THRDFASTALDeburring Bits1/2 x 1(2 3/4) cyl/pln carbide bur bear dbl cut2
    Contact_Supplier
THRDFASTALMasonry & Concrete Drill Bits3/4 x 6masonry drill bit 1/2 shank2
    Contact_Supplier
THRDFASTMSMachine Taps3/4-10plug tap2
    Contact_Supplier
THRDFASTFLMachine DiesM12-1.25extra nf hex die nut1
    Contact_Supplier
THRDFASTFLMetal Drill BitsSteelBlack Oxide#42h.s. jobber drill bit xgo black & gold18
    Contact_Supplier
THRDFASTFLMetal Drill BitsSteelBlack Oxide#59h.s. jobber drill bit xgo black & gold18
    Contact_Supplier
THRDFASTALMachine TapsM4.5-0.75bottom tap4
    Contact_Supplier
THRDFASTMSMetal Drill Bits15/32h.s. jobber drill bit43
    Contact_Supplier
THRDFASTMSMetal Drill Bits149/64 red. shank drill bit (1/2in)4
    Contact_Supplier
Valley NuWAMachine TapsSteel3/8-24nf carbon bottom tap2
    Contact_Supplier
Valley NuWAMachine Dies7/16-20nf carbon hex rethrd die nut2
    Contact_Supplier
Valley NuWAMachine Taps#10-32nf 2-flute hs plug tap union butterfield series 153411
    Contact_Supplier
LightningLANut Driving Bits, Nutsetters1/2 x 2 9/16magnetic driver nut setter 1/4 hex drive long evco#mshl1/220
    Contact_Supplier

Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.