FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | M4 | 4mm hex nut | 37 |
|
| OneMonroe | NC | Wing Nut | Steel | Zinc/Clear | nut wing type-a steel/zinc | 580 |
| |
| OneMonroe | NC | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 | nut 8-32 low crown hex cap nut 18 8 stainless steel 500/ctn | 130 |
|
| OneMonroe | NC | Heavy Hex Nut | Grade 2H | Galvanized | 1/2-8 | 1 1/2-8 2h hvy hexnut hot dip galv | 17 |
|
| OneMonroe | NC | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Grade 8 | Phosphate | 1/2-13 | 1/2-13 grade 8 phosphate and oil serrated flange nut | 156 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5 | m2.5 mm hex nut stainless | 30 |
|
| OneMonroe | NC | Slotted Round Nut (Shaft Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-25-25 | cstrnylttl lckstnlsstm 4in nylon total lock m10x25mm stainless stem stainless swivel bearing grey tpr tire stainless axle | 25 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain / Furnace Black | 5/16-18 | weld nut square short pilot projection 5/16-18 thread steel | 185 |
|
| OneMonroe | NC | Hex Jam Nut | Steel | Plain / Furnace Black | 2-12 | 2-12 hex fin jam nut | 3 |
|
| OneMonroe | NC | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 2-8 | 2-8 2h hvy hexnut | 8 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain / Furnace Black | #10-32 | nut 10-32 spot weld offset hole tab weld nut plain 1000/ctn | 365 |
|
| OneMonroe | NC | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Black | #10-32 | 10-32 two-way hex lock nut black zinc wax | 6 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | nylon insert stop nuts-heavy hex standard height (nu series) steel zinc | 262 |
| |
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | nylon insert stop nuts-light hex standard height (nm & ne series) steel zinc | 180 |
| |
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 1/2-13 | 1/2-13 a194/sa194 2h heavy hex nuts coarse med. carbon plain | 1288 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | 1 1/4-12 | 1 1/4-12 hex finish nut | 14 |
|
| Weaver | WA | Hex Jam Nut | Steel | Zinc/Clear | 9/16-12 | 9/16-12 hex jam nut zinc | 100 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | hood adjustment nut | 3 |
| |
| OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Plain / Furnace Black | acorn nut | 19 |
| |
| RePneu To | MI | Finished Hex Nut | Class 10.9 | Zinc/Clear | M5-0.80 | m5-0.80 hex nuts class 10 zinc cr+3 din 934 | 15000 |
|
| OneMonroe | NC | Finished Hex Nut | Grade A | Plain / Furnace Black | 1/4-28 | 1/4-28 plain finish grade a finished hex nut | 4627 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 5 | Plain / Furnace Black | 3/4-16 | 3/4-16 plain finish grade 5 finished hex nut | 9 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 5 | Zinc/Clear | 1 3/8-12 | 1-3/8-12 zinc finish grade 5 finished hex nut | 60 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1/4-20 | 1/4-20 yellow zinc finish grade 8 finished hex nut | 4050 |
|
| OneMonroe | NC | Heavy Hex Nut | Steel | Galvanized | 1/2-4 | 2 1/2-4 low carbon a563 hot dip galvanized heavy hex nut | 96 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | ms51971-1 dfars 252.225-7014 applies | 100 |
|
| OneMonroe | NC | Flat Washer | nas1291-c04m | 40 |
| |||
| OneMonroe | NC | Flat Washer | Steel | Plain / Furnace Black | nas1291-c06 lh3858-62 or equal | 20 |
| |
| Jackson | MS | Finished Hex Nut | 316, 317, A4 Stainless | Plain / Furnace Black | M24-3.00 | m24 x 3.00 coarse metric nut a-4 stainless steel | 41 |
|
| Jackson | MS | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain / Furnace Black | #10-32 | 10-32 nf nylon locknut 316 ss | 50 |
|
| OneMonroe | NC | Panel Nut | Steel | Plain / Furnace Black | pemref hsr-m3-3et panel nut | 90 |
| |
| OneMonroe | NC | T-Nut (Tee Nut) | Steel | Zinc/Clear | 3/8-16 x 7/16 | 3/8-16x7/16 tee nut 4 prong zinc | 390 |
|
| OneMonroe | NC | Weld Nut | Copper | Plain / Furnace Black | #10-32 | copper weld nut 10-32 | 1693 |
|
| OneMonroe | NC | Weld Nut | Copper | Plain / Furnace Black | 1/4-20 | round copper weld nut 1/4-20 | 387 |
|
| OneMonroe | NC | Lock Nut, Flange, w/o serrations | Grade G | Zinc/Clear | 5/8-18 | 5/8-18 zinc finish grade g flange top lock nut | 325 |
|
| OneMonroe | NC | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 | #8-32 18-8 stainless steel small pattern hex nut | 434 |
|
| OneMonroe | NC | Wing Nut | Steel | Zinc/Clear | 1/4-20 | 1/4-20 wing nut stamped zinc | 768 |
|
| OneMonroe | NC | Cap Nut (Acorn Nut) | Nylon (Polyamide) | Plain / Furnace Black | 1/4-20 | 1/4-20 acorn nut low crown mipla nyl nat | 500 |
|
| OneMonroe | NC | T-Nut (Tee Nut) | Steel | Plain / Furnace Black | 1/4-20 | 1/4-20 tee nut no-prong | 1157 |
|
| OneMonroe | NC | Channel Nut | Steel | Zinc/Clear | 1/4-20 | 1/4-20 twirl type-channel nut zinc pltd | 30 |
|
| OneMonroe | NC | Wing Nut | Steel | Zinc/Clear | 1/4-20 | 1/4-20 wing nut stamped zinc | 2032 |
|
| OneMonroe | NC | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Black Oxide | 1/4-20 | 1/4-20 serr flange hex nut stl blk ox | 300 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain / Furnace Black | M8-1.25-1.25 | m8-1.25 wide spot weld nut--plain | 2650 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | 1/4-28 | 1/4-28 hex finish nut le ft hand thread. | 71 |
|
| OneMonroe | NC | Coupling Nut | Steel | Zinc/Clear | 1-8 x 7/8 | 1-8 x 7/8 reducer coupling nut zinc pltd | 16 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1-14 | 1-14 thin nylon ins. l/n plated | 124 |
|
| OneMonroe | NC | Eye Nut / Lifting Eye Nut | Steel | Plain / Furnace Black | eye nut | 4 |
| |
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 5/16-24 | 5/16-24 stover locknut grade c zinc plt | 2300 |
|
| Century | FL | Wing Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3 | m3 wing nut a2 stainless steel din 315 | 7766 |
|
| Century | FL | Cap Nut (Acorn Nut) | Plain / Furnace Black | #10-24 | aa55628-23 cres 10-24 unc-2b nut plain cap high crw | 4 |
| |
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Plain / Furnace Black | ms17826-4 | 4 |
| ||
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Plain / Furnace Black | boeing bacn10jc4c lock nut | 3 |
| ||
| Global | CA | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | 1 | zn1 valco instruments-internal 1/16 nut internal fitting | 25 |
|
| Century | FL | Finished Hex Nut | Aluminum | Plain / Furnace Black | 1/2-13 | 1/2-13 finish hex nut aluminum | 700 |
|
| Global | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | M6-1.00 | M6-1.0 hex nut kep conical washer steel zinc | 8 |
|
| Global | CA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | #2-56 | 2-56 nylon insert locknut steel zinc iii clear rohs | 2,930 |
|
| Century | FL | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 2.0 | m 2.0 steel zinc plt hex lock nuts nylon insert din 985 | 200 |
|
| Century | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | nut finished hex 1/4-20 hex nut 18-8 with metal guard wax 916 | 195 |
|
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-cls-0616-2 self-clinching nut 9/16 (0.563) od 0.499 id 0.125 min panel thickness 3/8-16 thread. 18-8 304 steel/passivate | 448 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-clss-m5-2 self-clinching nut 8.70 mm od 6.33 mm id 1.4 mm min panel thickness m5x0.8 thread. 18-8 304 steel/passivate | 87,266 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | gs-feox-440 minature self-clinching nut 0.192 od 0.145 id 0.39-0.045 min panel th 0.040 shank l. 4-40 thread. 18-8 304 steel | 8 |
| |
| Century | FL | Lock Nut, Nylon Insert | Plain / Furnace Black | 1/2-13 | ms17829-8c | 119 |
| |
| Global | CA | Weld Nut | Copper | Plain / Furnace Black | gs-wn-632 minature self-locking weld nut 0.341 od 0.094 th 0.315 id 6-32 thread carbon steel/copper | 18 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | gs-ac-032-1 floating self-clinching nut 10-32 thread 0.38 min panel thickness 18-8 304 steel | 116 |
| |
| GOEBEL | TX | Spring Steel Lock Nut (PalNut, etc.) | Steel | Plain / Furnace Black | counter nut for go-rn1/rn2/sn1 for go-rn1/rn2/sn1 | 404 |
| |
| Global | CA | Panel Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M4-0.70 | gs-clss-024-2 self-clinching nut mod thread m4 x 0.7 11/32 (0.340) od 0.249 id 0.056 min panel thickness m4 x 0.7 thread. stainless steel/passivate | 245 |
|
| Century | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-1.50 | m16.0 x 1.5 b hx jam nut 18-8 din 439 | 16 |
|
| Century | FL | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1/2-20 | 1/2-20 nte ny in locknut steel zinc | 1360 |
|
| Global | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/8-14 | thin nylon ins l/n 18-8 nte locknut 303ss | 225 |
|
| Global | CA | Finished Hex Nut | Nylon (Polyamide) | Plain / Furnace Black | ms51858-7 nylon hex nut military 7/16 af x 17/64 th x 1/4-20 thd 7/16 af x 17/64 th x 1/4-20 thd | 2 |
| |
| Century | FL | Coupling Nut | nas1351n08lb4 | 138 |
| |||
| Global | CA | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | 45/8 x 0.063 t4.50 | 2-047-n0552-90 parker seal o-ring 4.625 odx0.063 thx4.50 id | 1 |
|
| Global | CA | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Plain / Furnace Black | 06 | nas1068c06m self-locking nut plate mil 6-32 thd x 0.545 l st/cad 6-32 thd x 0.545 l st/cad | 41 |
|
| Global | CA | Self-Clinching Nut | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | gs-cls-0420-2 self-clinching nut 0.440 od 0.343 id 0.090 min panel thickness 1/4-20 thread. stainless steel/passivate | 332 |
| |
| Global | CA | Self-Clinching Nut | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | gs-cls-0420-3 self-clinching nut 0.440 od 0.343 id 0.125 min panel thickness 1/4-20 thread. stainless steel/passivate | 178 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-cls-0428-1 self-clinching nut 0.440 od 0.343 id 0.056 min panel thickness 1/4-28 thread. 18-8 304 steel/passivate | 1,762 |
| |
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-lac-440-2 floating self-locking nut 0.360 od 0.054 shank length 4-40 thread 18-8 304 steel/passivate | 2,238 |
| |
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | #8-32 | gs-las-832-2 floating self-locking nut 0.440 od 0.054 shank length 8-32 thread steel | 340 |
|
| Global | CA | Self-Clinching Nut | Steel | Plain / Furnace Black | #2-56 | gs-ms-256-0 self-clinching nut 0.250 od 0.030 shank length 0.030 min panel thickness 2-56 thread steel | 91 |
|
| Global | CA | Self-Clinching Nut | Steel | Plain / Furnace Black | gs-s-0616-2 self-clinching nut 0.563 od 0.120 shank length 3/8-16 thread heat-treated carbon steel | 450 |
| |
| Global | CA | Self-Clinching Nut | Steel | Plain / Furnace Black | gs-s-832-0 self-clinching nut 0.312 od 0.030 shank length 8-32 thread heat-treated carbon steel | 860 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m2-1 self-clinching nut 6.35 mm od 0.97 mm length 1 mm min panel m2x0.4 thread carbon steel/zinc | 2,991 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m2-2 self-clinching nut 6.35 mm od 1.38 mm length 1.4 mm min panel m2x0.4 thread carbon steel/zinc | 553 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m2.5-2 self-clinching nut 6.35 mm od 1.38 mm length 1.4 mm min panel m2.5x0.45 thread carbon steel/zinc | 674 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3-0 self-clinching nut 6.35 mm od 0.77 length 0.8 mm min panel m3x0.5 thread carbon steel/zinc | 5,038 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3-1 self-clinching nut 6.35 mm od 0.97 length 1 mm min panel m3x0.5 thread carbon steel/zinc | 25,060 |
| |
| Global | CA | Self-Clinching Nut | Steel | Black Oxide | gs-s-m3-1 self-clinching nut 6.35 mm od 0.97 length 1 mm min panel m3x0.5 thread carbon steel/black oxide | 786 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3-2 self-clinching nut 6.35 mm od 1.38 length 1.4 mm min panel m3x0.5 thread carbon steel/zinc | 1,600 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3.5-0 self-clinching nut 7.11 mm od 0.77 length 0.8 mm min panel m3x0.5 thread carbon steel/zinc | 43,860 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3.5-1 self-clinching nut 7.11 mm od 0.97 length 1 mm min panel m3x0.5 thread carbon steel/zinc | 33,570 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3.5-2 self-clinching nut 7.11 mm od 1.38 length 1.4 mm min panel m3x0.5 thread carbon steel/zinc | 1,436 |
| |
| Century | FL | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | captive fast. q2178/mcmaster 94674a540 flush mount captive nut 18-8 per print | 800 |
| |
| Century | FL | Finished Hex Nut | b1821bh056f125n | 14 |
| |||
| Century | FL | Weld Nut | Plain / Furnace Black | #10-24 | 10-24 weld nut round base plain | 800 |
| |
| Century | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5 | m 5.0 18-8 hex jam nuts din 439 | 795 |
|
| Century | FL | Castle Nut (Hex) | ms21905v4p | 27 |
| |||
| Century | FL | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Plain / Furnace Black | 93 | 93400495 lock nut rev d | 700 |
| |
| Century | FL | Flange Nut, Non-locking | Grade 8 | Zinc/Clear | 5/8-18 | 5/8-18 hex flange nut no serrations 5/8-18 hex flange nut no serrations grade 8 zinc plated | 600 |
|
| Century | FL | Panel Nut | ms27980-7n | 50 |
| |||
| Century | FL | Hex Jam Nut | 316, 317, A4 Stainless | Plain / Furnace Black | 12 | an316c12 | 27 |
|
| Century | FL | Finished Hex Nut | Steel | Plain / Furnace Black | na0073-060m | 1 |
| |
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | ms17825-5 | 10 |
| |
| Century | FL | Finished Hex Nut | b1867ea050080 | 6 |
| |||
| IndexFast | CA | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Clear | #8-32 | lock nut de832075ebgeqregular type lock nut 8-32 steel/zinc electro de832075ebgeqregular type lock nut 8-32 steel/zinc electro | 17000 |
|
| Endries | WI | Finished Hex Nut | Steel | Zinc/Clear | 1/2-20 | 1/2-20 finished hex full nut tri clear zinc 96wh/120 red rust patch | 195 |
|
| VIKING BO | OR | Heavy Hex Nut | Grade 2H | Zinc/Yellow | 5/8-11 | 800 |
| |
| VIKING BO | OR | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 1/2-20 | 1895 |
| |
| VIKING BO | OR | Hex Jam Nut | Steel | Zinc/Yellow | 5/8-11 | 6 |
| |
| VIKING BO | OR | Hex Jam Nut | Grade 2 | Plain / Furnace Black | 1-1/4-7 | 69 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 1/2-13 | 79 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 9/16-12 | 996 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 5/8-11 | 388 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 3/4-10 | 162 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 8 | Zinc/Yellow | 5/16-18 | 2473 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 8 | Zinc/Yellow | 9/16-12 | 103 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 5/8-11 | 600 |
| |
| VIKING BO | OR | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | 8-32 | 1271 |
| |
| American | NY | Wing Nut | Steel | Zinc/Clear | 10/32 | 10/32 wing stamped wing nuts zp | 6000 |
|
| Weaver | WA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | M8-1.00 | 8-1.0 nylock nut zinc | 20 |
|
| Weaver | WA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 30-3.5 | 30-3.5 nylock nut zinc | 8 |
|
| Weaver | WA | Slotted Hex Nut | Steel | Zinc/Clear | 9/16-18 | 9/16-18 slotted hex nut zinc | 40 |
|
| Weaver | WA | Coupling Nut | Steel | Plain / Furnace Black | 3/8-16 | 3/8-16 short coupling nut plain | 40 |
|
| Weaver | WA | Hex Jam Nut | Steel | Zinc/Clear | 3/4-16 | 3/4-16 l.h. jam nut zinc | 15 |
|
| Weaver | WA | Acme Thread Nut | Steel | Plain / Furnace Black | 1-5 | 1-5 acme coupling/double nut plain | 5 |
|
| Weaver | WA | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | M6-1.00 | 6-1.0 acorn/cap nut zinc | 39 |
|
| Weaver | WA | Slotted Hex Nut | Steel | Plain / Furnace Black | 2-4 1/2 | 2-4.5 slotted hex nut plain | 1 |
|
| Weaver | WA | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 | 8-1.25 acorn/cap nut 18-8 ss | 4 |
|
| Weaver | WA | Finished Hex Nut | Brass | Plain / Furnace Black | 1 1/4-12 | 1 1/4-12 hex nuts brass | 20 |
|
| Weaver | WA | Square Nut | Steel | Plain / Furnace Black | 5-.8 | 5-.8 square nut plain | 175 |
|
| Weaver | WA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 16-1.5 | 16-1.5 nylock nut 18-8 ss | 14 |
|
| Weaver | WA | Hex Jam Nut | Steel | Plain / Furnace Black | 10-1.0 | 10-1.0 jam nut plain | 45 |
|
| Weaver | WA | Hex Jam Nut | Steel | Zinc/Clear | 24-2.0 | 24-2.0 jam nut zinc | 9 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | M10-1.50 | 10-1.5 castle nut zinc | 88 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | 10-1.0 | 10-1.0 castle nut zinc | 17 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | M12-1.75 | 12-1.75 castle nut zinc | 13 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | 18-2.5 | 18-2.5 castle nut zinc | 38 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | 20-2.5 | 20-2.5 castle nut zinc | 16 |
|
| Weaver | WA | Slotted Hex Nut | Steel | Plain / Furnace Black | M8-1.25 | 8-1.25 slotted hex nut plain | 86 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
