ISO 8741 Grooved Pin with Half-Length Reverse Groove by Material, Finish and Size

Grooved Pins, or just Groove Pins, are solid non-threaded press-fit pins that have grooves running axially along their surface. Since the grooves are swaged, material is displaced, increasing the diameter of the pin. As the pin is forced into a hole, the grooves close and the pin locks in place. Grooved pins have good anti-vibration performance.

Search thousands of Metric fasteners by ISO specification, including ISO 8741 Grooved Pins , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

ISO 8741 Grooved Pins by Metric Sizes

Grooved Pins are available on the FCH Network with metric diameters that range from M2.5 to M20, and with metric lengths that range from 12mm to 40mm.

Click on the metric diameters or lengths below to view, or
Shop All ISO 8741 Grooved Pins
Metric Diameters
Metric Lengths
ISO 8741 Grooved Pins by Materials

ISO 8741 Grooved Pins are available on the FCH Network in materials that range from Steel to 300 Stainless (A1,A2, 18-8,304,310 etc.).

Click on the materials below to view or Shop All ISO 8741 Grooved Pins
ISO 8741 Grooved Pins by Coatings/Finishes

ISO 8741 Grooved Pins are available on the FCH Network in finishes or coatings that range from Plain to Plain.

Click on the finishes below to view or Shop All ISO 8741 Grooved Pins