Metric Specialties, Inc
FCH Member Advertisement
ISO 8739 Grooved Pin with Full-Length Parallel Groove by Material, Finish and Size
Grooved Pins, or just Groove Pins, are solid non-threaded press-fit pins that have grooves running axially along their surface. Since the grooves are swaged, material is displaced, increasing the diameter of the pin. As the pin is forced into a hole, the grooves close and the pin locks in place. Grooved pins have good anti-vibration performance.
Search thousands of Metric fasteners by ISO specification, including ISO 8739 Grooved Pins , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.
ISO 8739 Grooved Pins by Metric Sizes
Grooved Pins are available on the FCH Network with metric diameters that range from M2 to M12, and with metric lengths that range from 12mm to 100mm.
Shop All ISO 8739 Grooved Pins
ISO 8739 Grooved Pins by Materials
ISO 8739 Grooved Pins are available on the FCH Network in materials that range from Steel to 300 Stainless (A1,A2, 18-8,304,310 etc.).
ISO 8739 Grooved Pins by Coatings/Finishes
ISO 8739 Grooved Pins are available on the FCH Network in finishes or coatings that range from Plain to Zinc/Clear.