ISO 2341 Clevis Pin with Head and Split Pin Hole by Material, Finish and Size

Clevis Pins are headed pins that consist of a head, an unthreaded shank and a hole. The purpose of a clevis pin is to form the removable part of a “U” shaped clevis fastener, being inserted through the two holes of the clevis joint or shackle. The clevis pin is locked in place either by a cotter pin, or by nut if the end of the clevis pin is threaded.

Search thousands of Metric fasteners by ISO specification, including ISO 2341 Clevis Pins , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

ISO 2341 Clevis Pins by Metric Sizes

Clevis Pins are available on the FCH Network with metric diameters that range from M5 to M40, and with metric lengths that range from 16mm to 120mm.

Click on the lengths below to view or Shop All ISO 2341 Clevis Pins
ISO 2341 Clevis Pins by Materials

ISO 2341 Clevis Pins are available on the FCH Network in materials that range from Steel to 316, 317, A4 Stainless.

Click on the materials below to view or Shop All ISO 2341 Clevis Pins
ISO 2341 Clevis Pins by Coatings/Finishes

ISO 2341 Clevis Pins are available on the FCH Network in finishes or coatings that range from Plain to Zinc/Yellow.

Click on the finishes below to view or Shop All ISO 2341 Clevis Pins