| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| RePneu To | MI | Measuring Tools | #36 | #36 wire gauge 118 | 7 |
| ||
| RePneu To | MI | Screwdriving Insert Bits & Power Bits | Steel | 12-14 x 1 1/2 | slotted 12-14 insert bit x 1-1/2 length-5/16 hex | 12 |
| |
| RePneu To | MI | milwaukee recip saw 18v tool only | 3 |
| ||||
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee m18 18-volt lithium-ion brushless 1/2 in. high torque impact wrench with friction ring (tool-only) | 4 |
| |
| RePneu To | MI | Service & Repair Kits | M18 | m18 forcelogic knockout tool kit 2677-21 | 1 |
| ||
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee m18 18v lithium-ion cordless compact heat gun (tool-only) | 4 |
| |
| RePneu To | MI | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16 | hose clamp 5/16 to 5/8 in clamping diameter sae 4 300 stainless steel | 10 |
| |
| RePneu To | MI | Impact Socket Drivers | Steel | M18 | 1/2 drive milwaukee fuel m18 impact 2967-20 | 2 |
| |
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee m18 fuel 18v 8 in. lithium-ion brushless cordless metal cutting circular saw (tool-only) | 2 |
| |
| RePneu To | MI | Electrical Lugs & Terminals | Nylon (Polyamide) | 16-14 | 16-14 awg #10 stud nylon insulated double crimp ring terminal | 500 |
| |
| RePneu To | MI | Electrical Lugs & Terminals | Nylon (Polyamide) | 22-18 | 22-18 awg red-nylon fully insulated quick connect double crimp-male | 1000 |
| |
| RePneu To | MI | Electrical Lugs & Terminals | Nylon (Polyamide) | 16-14 | 16-14 awg blue-nylon fully insulated quick connect double crimp-female | 500 |
| |
| RePneu To | MI | Electrical Lugs & Terminals | Nylon (Polyamide) | 12-10 | 12-10 awg yellow-nylon fully insulated quick connect double crimp-female | 500 |
| |
| RePneu To | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 5/16-12 x 2 | 5/16-12x2 unslt hex washer #3 self drilling screw zinc and bake | 6000 |
|
| RePneu To | MI | Metal Drill Bits | Steel | 9/32 | 9/32 taper length 135 black parabolic flute 6 oal | 60 |
| |
| RePneu To | MI | Router Bits | Steel | 1/2 x 2 x 1/2 | amana 47126 trimming router bits flush trim router bits carbide tipped 1/2 dia x 2 x 1/2 shank | 2 |
| |
| RePneu To | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 7/8 | 4.5 80 grit resin disc 7/8 hole | 50 |
| |
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee m18 18v lithium-ion redlithium forge xc 8.0 ah battery pack | 1 |
| |
| RePneu To | MI | Battery Packs | Steel | M12 | m12 3.0ah battery | 5 |
| |
| RePneu To | MI | milwaukee packout large storage box | 3 |
| ||||
| Shadran I | Button Head Socket Cap Screw | Steel | Chrome Plated | #8-32 x 3/4 | 8-32x3/4 chrome bhscs | 10 |
| |
| RePneu To | MI | Machine Taps | Steel | M4-0.70 | m4x0.7 hss sp plug tap type-20 bright finish | 3 |
| |
| RePneu To | MI | Machine Taps | Steel | M6-1.00 | m6x1 hss sp plug tap type-20 bright finish | 4 |
| |
| RePneu To | MI | Machine Taps | Steel | #10-24 | #10-24 hss sp plug tap type-20 bright finish | 15 |
| |
| RePneu To | MI | Machine Taps | Steel | #10-32 | #10-32 hss sp plug tap type-20 bright finish | 14 |
| |
| RePneu To | MI | Machine Taps | Steel | 1/4-28 | 1/4-28 hss sp plug tap type-20 bright finish | 10 |
| |
| RePneu To | MI | Machine Taps | Steel | 3/8-24 | 3/8-24 hss sp plug tap type-20 bright finish | 12 |
| |
| RePneu To | MI | Machine Taps | Steel | 1/2-13 | 1/2-13 hss sp plug tap type-20 bright finish | 5 |
| |
| RePneu To | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 80 | 80 grit sanding belt wheel 10 per pack | 15 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 5/32 | 5/32 bad dog drill bit | 2 |
| |
| Century | FL | Set Screw (Socket Head) | Steel | Plain | ms51038-62 set screw | 837 |
| |
| RePneu To | MI | Machine Taps | Steel | M7-1.00 | m7x1 hss sp plug tap type-20 bright finish | 2 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 3/16 | 3/16 bad dog drill bit | 2 |
| |
| RePneu To | MI | Gloves & Hand Protection | orange full dip mcr glove 6710fs | 36 |
| |||
| RePneu To | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 3 | 3m hook & loop disc 5 dia 800 grit coated aluminum oxide-film & polyester backing super fine grade | 6 |
| |
| RePneu To | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | hookit flm dsc 375l 5 x nh p1200 5 in dia 500x aluminum oxide 50pk | 1 |
| ||
| RePneu To | MI | Handles | Brass | 1/4 | manual 2-way ball valve 1/4 in fnpt x 1/4 in fnpt full port 600 psi cwp lever handle brass | 16 |
| |
| RePneu To | MI | Gloves & Hand Protection | m | medium 5mil in-touch powder free nitrile glove 100 per box | 110 |
| ||
| RePneu To | MI | Gloves & Hand Protection | xl | extra large 5mil in-touch powder free nitrile glove 100 per box | 40 |
| ||
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M2-0.40 x 12 | phil pan m/s w/nylon patch 18-8 ss pass a din 7985 | 3,069 |
|
| Global | CA | Cable Clamps & Ties | abmm-at cable tie mount 0.750 wx0.750 wx0.180 h | 121 |
| |||
| Global | CA | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | 3/32 x 1/4 | rollpin 420 ss passivate | 65,619 |
|
| Global | CA | 8115-b-440-28 amatom | 6 |
| ||||
| Global | CA | 9533b-b-0632-3a amatom | 6 |
| ||||
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6-32 x 1 | phil flat 82d m/s 18-8 ss ide | 4,879 |
|
| Global | CA | Handles | 9108 keystone round int thd handle 2.00 wx1.00 hx0.187 d | 1 |
| |||
| NAPPCO | TX | Rivet Installation Tools & Accessories | Plain | huck gland assembly #125742 | 2 |
| ||
| FasSpcMfg | FL | Shoulder Bolt (Stripper Bolt) | ASTM A574 | Plain | 5/16 x 6 7/16 (1/4-20) | 5/16 x 6-7/16 socket shoulder bolt alloy rc 39-43 1/4-20 x 1/2 thread | 6 |
|
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee m18 18v lithium-ion cordless force logic cable cutter with cu/al jaws and hard case | 2 |
| |
| Brikksen | FL | Hose Clamp | clamp t-bolt diameter range | 750 |
| |||
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 7/8 | 1/4-20 x 7/8 flat 82 degree countersink head hex socket cap screw asme b18.3 18.8 stainless steel with blue nylon patch | head hex socket cap screw asme b18.3 18.8 stainless steel with blue nylon patch | head hex socket cap screw asme b18.3 18.8 stainless steel with blue nylon patch | inquire |
| |
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 1/2 | 1/4-28 x 1/2 flat 82 degree countersink head hex socket cap screw asme b18.3 18.8 stainless steel | head hex socket cap screw asme b18.3 18.8 stainless steel | head hex socket cap screw asme b18.3 18.8 stainless steel | 2200 |
| |
| GLF | OH | Weld Nut | Steel | Zinc/Clear | M8 | m8 rd weld nut stl zc per dwg | 131103 |
|
| GLF | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 1 | #8 x 1 phillips ovalal hd s/m/s type-a stl zc | 50 |
|
| GLF | OH | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 19.8 | 19.8 22.6 oetiker clamp 1 ear s/s | 15 |
| |
| GLF | OH | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 1/8-5 | worm drive hose clamp 3-1/8-5 range sae 72 s/s | 500 |
| |
| GLF | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/16 | #4-40 x 5/16 bhcs 18-8 s/s | 1523 |
|
| GLF | OH | Set Screw (Socket Head) | Steel | Zinc/Clear | #8-32 x 1/4 | #8-32 x 1/4 soc set screw cup pt stl zc | 5308 |
|
| GLF | OH | Carriage Bolt | Grade 5 | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20 x 1/2 carriage bolt gr 5 stl zc | 2560 |
|
| GLF | OH | Electrical Lugs & Terminals | Nylon (Polyamide) | closed-end connector-nylon insulated-#nc-1010 50/pk | 150 |
| ||
| GLF | OH | Socket Head Ca p Screw | 316, 317, A4 Stainless | Plain | 1/2-13 x 1 3/4 | 1/2-13x1 3/4 socket head cap screw stainless 316 | 18 |
|
| NutsBolts | NE | Concrete/Masonry Screw (Tapcon, Titen etc.) | 316, 317, A4 Stainless | Plain | 3/8 x 3 | 3/8 x 3 ss titen hd 316ss | 42 |
|
| NutsBolts | NE | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Grade 5 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/2-13 x 1 1/2 | 1/2-13 x 1 1/2 serrated flange bolt gr5 magni 565 | 28177 |
|
| Bossard | AZ | pin stainless penn engineering | 8488 |
| ||||
| Centennia | CO | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 5/16-18 x 4 1/2 | 5/16-18 x 4 1/2 hex c/s gr8 nc dom zn&y | 25 |
|
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #12-24 x 1 1/2 | #12-24x1 1/2 square pancake sds full thread zinc bk 1000hr self-drilling screws | 10000 |
|
| Kanebridge | IL | Wood Screw | Steel | Zinc/Clear | #6-13 x 1/2 | #6-13x1/2 sq pan deep thread type-17 full thread zinc and bake wood screws | 80000 |
|
| Kanebridge | IL | Wood Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-9 x 5/8 | #10-9x5/8 phillips pan deep thread ws full thread 410 stainless steel wood screws | 30000 |
|
| CIF | IL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2 | 1/2-13 x 2 button head socket cap screw 18-8 stainless steel | 348 |
|
| CIF | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 | 1/4-20 x 2 slotted flat head machine screw 18-8 stainless steel | 200 |
|
| Hodell | OH | Fender Washer | Steel | Zinc/Clear | 1/4 x 2 | 1/4 x 2 fender washer zn | 1790 |
|
| SWACO | OH | Rivet Installation Tools & Accessories | Plain | 8553-3 heli-coil mandrel | 4 |
| ||
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #8-32 x 7/8 | ms51957-48 304ss | 170 |
|
| SWACO | OH | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 3/4 | 3/16x3/4 dowel pin 18-8ss | 500 |
|
| Field Fas | IL | screw g4m078a-screw | 4 |
| ||||
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 8575 heli-coil small shim | 222 |
| ||
| SWACO | OH | Machine Screw | Steel | Zinc/Clear | #8-32 x 1/2 | #8-32x1/2 slotted tru ms stl zp | 200 |
|
| SWACO | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 1/4 | 3/4-10x2-1/4 hhcs 18-8ss | 160 |
|
| SWACO | OH | pfc4-m4-50 pem spec | 106 |
| ||||
| SWACO | OH | Quick Access Panel Fasteners (1/4 Turn etc.) | 1/4 | stud assembly 1/4 turn phillips flush head | 24 |
| ||
| Accutite | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 100 | m6x1.00x100 hex cap screw a2 ss partial thread din 931 | 403 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 125135 tube pintail 2015 | 2 |
| ||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 129378 anvil asm-24 bt | 2 |
| ||
| AIH | AZ | Split Lock Washer | Steel | Zinc/Black | 5/16 | 5/16 split lockwasher black zinc | 3491 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M16-2.00 x 140 | M16-2.0x140 cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 7/16-20 x 1 | 7/16-20x1 grade 8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| Field Fas | IL | Swage Sleeves, Crimp Sleeves | Plain | sleeve 245/255/254 | 1 |
| ||
| Field Fas | IL | Flat Head Socket Cap Screw | Steel | Plain | M4-0.70 x 16 | m4-.7 x 16 soc flat cap f/t 31 din 7991 | 1200 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | Plastic | Zinc/Clear | 2 1/2 x 1 3/8 | caster stainless steel swivel plate wheel sz 2-1/2 x 1-3/8 wheel mat advanced elastomer bearing delrin load ht 3-3/4 top plt sz 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 2-7/8 to 3 load cap 400 lbs | 3 |
|
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 400 |
| ||
| OneMonroe | MN | Cushioned Pipe & Tube Loop Clamp | pull clamp | 22 |
| |||
| OneMonroe | MN | Finished Hex Nut | Class 8.8 | Zinc/Yellow | M16-2.00 | m16 x 2.00 hx nut-8.8 yz din 934 | 69 |
|
| OneMonroe | MN | Threaded Rod | Steel | Plain | 5/8-11 x 36 | 5/8-11 x 36 all thread rod steel | 1 |
|
| OneMonroe | MN | Flat Head Socket Cap Screw | Steel | Plain | M4-0.70 x 6 | m4-.7 x 6m flat soc cap screw | 24 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 7/16-14 x 2 3/4 | 7/16-14 x 2-3/4 skt hd. c/s-pln | 75 |
|
| OneMonroe | MN | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M6-1.00 x 12 | 6m x 1.0 x 12mm 10.9 btn skt hd c/s-zp | 3235 |
|
| OneMonroe | MN | Machine Screw | Cadmium | #4-40 x 5/16 | screw hc 4-40x5/16 military phillips flat 100 degree f/t machine screw cadmium 5000/ctn | 125 |
| |
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 13/32 x 13/16 x .125 | 3/8 ex thk fw 18-s ss usa 13/32 x 13/16 x .125 z9131 | 10 |
|
| OneMonroe | MN | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/64 x 7/8 | 5/64 x 7/8 spring pin ss | 1700 |
|
| OneMonroe | MN | Strut Systems (Channels, Clamps, Hangers, etc.) | 316, 317, A4 Stainless | 3 1/4 x 120 | 3 1/4 x 120 12 ga back/back channel shrt slot 316 st | 1 |
| |
| OneMonroe | MN | Slotted Spring Pin (Roll Pin) | Plain | 5/16 x 3/4 | 5/16 x 3/4 spring pin | 5 |
| |
| OneMonroe | MN | L-Wrenches, Allen Wrenches & Torx Wrenches | 1/8 x 6 | 1/8 x 6 hex key t-handle | 15 |
| ||
| OneMonroe | MN | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M12-1.75 x 70 | m12 x 1.75 x 70 hx flange bolt-10.9-pln | 8 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 13/16 | caster swivel plate wheel sz 2 x 13/16 wheel mat hard rubber bearing plain bore w/brake top plt sz 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 3 load ht 2-15/16 load cap 200 lbs temp rt-30 to +160 f | 2 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | roller-mini swivel caster | 64 |
| |||
| Alma Bolt | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 3/4 | #12 x 3/4 st. st. pan slotted type-a | 3475 |
|
| Alma Bolt | MI | Machine Screw | Black Oxide | #10-24 x 5/8 | #10-24 x 5/8 black oxide flat slotted machine screw | 111000 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 1-8 x 4 | 1-8 x 4 grade 5 hhcs yellow-zinc | 70 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/8-7 x 7 | 1 1/8-7 x 7 gr 8 alloy hhcs zinc-yellow | 28 |
|
| API | IA | Cushioned Pipe & Tube Loop Clamp | Steel | Plain | clamp assy-double insulated | 36 |
| |
| Hybroco S | MI | 3/8-16 x 1 ring proj ss | 1400 |
| ||||
| Global Fa | TX | Electrical Lugs & Terminals | 22/18 | 22/18 wire #10 stud ringterminal insulated keystone electronics 8211 | null |
| ||
| Empower H | IL | Wire Rope Clamps, U-Bolt Clamps | Iron | Galvanized | 7/16 | 260-0716 wire rope clip260-7/16 malleable iron galvanized finishfor rope size 7/16 not to be used for overhead lifting | 300 |
|
| IndexFast | CA | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Steel | Zinc/Clear | push-on retainer (pushnut press nut etc.) steel zinc/clear .437 push on type speed nut round | inquire |
| |
| AFT Faste | TX | Finished Hex Nut | Class 8.8 | Zinc/Clear | M20-2.50 | M20-2.50 hex nut class 8 zp cr3 din 934 | 193 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | hex head cap screw 18-8 stainless plain | 844 |
| |
| Coburn Myers Fastening Systems | PA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Class 10.9 | Galvanized | heavy hex structural bolt (a325 a490 10.9) a325 galvanized | 8 |
| |
| Hewes | NY | Socket Head Cap Screw | Steel | Zinc/Black | #4-40 x 3/4 | 4/40x3/4 socket hd cap screw zinc black chromate | 100 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #10-32 x 1/2 | 10-32 x 1/2 socket cap 316 stainless | 13 |
|
| FasSpcMfg | FL | Set Screw (Square Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2.5 | 1/4-20 x 2.5 spec sqr set cup pt 18-8 stn | 83 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/16-24 x 1 1/4 | 5/16-24 x 1-1/4 hex cap inconel 625 | 2 |
|
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2-56 x 1 | 2-56 x 1 socket set cup point 18-8 stainless | 1791 |
| |
| FasSpcMfg | FL | Sockets | Titanium | #8-32 x 3/4 | 8-32 x 3/4 socket set cup point titanium grade 2 | 3 |
| |
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 1/4 | 8-32 x 1 1/4 slottedround m/s pkg plated | 2500 |
|
| OneMonroe | MA | Self-Tapping Thread Rolling Screw | Steel | Black Oxide | #8-32 x 1/2 | 8-32 x 1/2 flat phillips uc taptite black oxide | 14800 |
|
| OneMonroe | MA | Hex Jam Nut | Grade 5 | Zinc/Yellow | 3/8-24 | 3/8-24 grade 5 yellow zinc hex jam nut | 4688 |
|
| OneMonroe | MA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 5/8-11 | 5/8-11 nylon insert lock nut zinc 100 per bag wanco 102907 | 200 |
|
| OneMonroe | MA | Flat Washer | Nylon (Polyamide) | Plain | #4 x 3/8 | #4 x 3/8 nylon flat washer (natural) pkg | 850 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #6-32 x 1/2 | 6-32 x 1/2 slottedtruss m/s pkg plated | 3300 |
|
| Irwin Ind | Ont | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/4 | 4-40x3/4 pan phil ext tooth sems m/s 18-8 304 steel b18.13 | 2400 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 8 | Plain | 5/8-11 x 16 | 5/8-11 x 16 hex cap screw gr 8 plai | 3 |
|
| Raw Produ | NJ | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 1/4 (.188-.250) | pop rivet 304 ss 6-4 3/16 x 1/4 grip rvt000079 | 4384 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 1 | phillips pan head sms type-a point zinc #10 x 1 | 500 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain | #12-24 x 3 | brass slotted flat head ms #12-24 x 3 | 265 |
|
| Raw Produ | NJ | SAE Flat Washer | Grade 8 | Plain | 1/4 | flat washers sae grade 8 1/4 | 9521 |
|
| Raw Produ | NJ | Heavy Hex Structural Bolt (A325, A490, 10.9) | Galvanized | 3/4-10 x 2 1/2 | heavy hex structural bolts a325 hdg 3/4-10 x 2-1/2 pt | 500 |
| |
| Raw Produ | NJ | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1/2 | spanner ovalal head sms 18-8ss #8 x 1/2 | 200 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | button head socket cap screws 304 ss 1/4-20 x 1 | 21203 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 25 | metric phillips pan head ms a2 ss m6 x 25m | 589 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12 x 1 1/2 | square drive pan head self drill 410 ss #12 x 1-1/2 | 76 |
|
| Mil-Spec | MD | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 socket set cup point 316 stainless steel | 55 |
|
| Mil-Spec | MD | Hex Head Cap Screw | Brass | Plain | 1/2-13 x 3/4 | 1/2-13 x 3/4 hex head cap screw brass plain | 190 |
|
| AEROSPCE | MN | m45938/7-2p pem fex-440 | 5393 |
| ||||
| AEROSPCE | MN | so-832-10zi pem .312longref#nas1129-08-10z thruhole | 172 |
| ||||
| AEROSPCE | MN | bso-632-18zi pem .562longref#nas1129-06-b-18z blind | 11257 |
| ||||
| AEROSPCE | MN | Blind Rivet | Aluminum | Plain | tfhs-632-12 pop rivet ref#-m63540/6-17c-.750long(nonflush tfhs-632-12 | 280 |
| |
| AEROSPCE | MN | Latches & Catches | a3-40-625-12 southco slide latch | 379 |
| |||
| F. Solutions | OH | Machine Taps | Steel | 5.5 x 0.9 | mm hss p tap 5.5x0.9 | 12 |
| |
| F. Solutions | OH | Tension Control Bolt (F3125 Gr. F1852, F2280) | Steel | Plain | 3/4-10 x 2 1/2 | tc bolt assembly 3/4-10x2-1/2 a325 domestic plain | 38 |
|
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/4 | trimmed hex machine screw 8-32x1/4 18-8 | 100 |
|
| F. Solutions | OH | Flat Head Socket Cap Screw | Steel | Black Oxide | 5/16-18 x 2 1/2 | flat socket cap screw 5/16-18 x 2-1/2 alloy black oxide | | 100 |
|
| National | Ont | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/8 | 3/8 l.a. hex key | 25 |
| ||
| National | Ont | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | M3.5 x 13 | m3.5x13 type-ab lrg pan phil st case harden zinc | 77650 |
|
| National | Ont | Screwdriving Insert Bits & Power Bits | Steel | T30 1/4 x 2 3/4 | t-30 power bit 1/4x2 3/4 | 8 |
| |
| National | Ont | Blind Rivet | Aluminum | Black Oxide | 1/8 x 0.129-0.133 (187) | 1/8 x 0.129-0.133 hole x 0.126-0.187grip rivet alu/alu black led5006401 | 18000 |
|
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | m5 x 20mm rndwa 6-lobe t-20 trilobe plastic tf scr triv znc | 518310 |
| |
| Mansco | MI | PC Board Inserters, Extractors & Ejectors | sim card ejector tray eject pin ejector removal tool | 600 |
| |||
| Mansco | MI | Set Screw (Socket Head) | Steel | Plain | M8-1.25 x 35 | M8-1.25x35 socket set scr cup pt pln din 916 | 14500 |
|
| AFI | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 316, 317, A4 Stainless | Plain | 3/8-16 | 3/8-16 dome-loc nut 316 ss () () | 805 |
|
| AFI | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1/2 | #8x1/2 phil oval type-a ss () () | 700 |
|
| AFI | FL | Round Spacer | Steel | Zinc/Clear | 6mm rd spacer al rohs raf m0549-4-al-0 () | 1596 |
| |
| Global Fa | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x .375 | 1/4-28x.375 ss in heli-coilininsertinternal/locking heli-coil 3591-4cn-0375 | 955 |
|
| Global Fa | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 20 | m5-0.8x20 ss phil/flat m/s a2 | 448 |
|
| Global Fa | TX | Electrical Lugs & Terminals | terminal concord electronics 13-532-2-01 | 1000 |
| |||
| Global Fa | TX | 10-32 steelcorner/floating-anchordry/film esna rm52lhta525-02 | 15 |
| ||||
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | lee spring comp spring sst | 6 |
| ||
| Olander | CA | Cable Clamps & Ties | heyco 1/4 cable clamp nat | 433 |
| |||
| Olander | CA | Machine Screw | Steel | Plain | #6-32 x 1/4 | 6-32 x 1/4 slot bind stl ni () () | 310 |
|
| Olander | CA | Machine Screw | Nylon (Polyamide) | Zinc/Clear | #2-56 x 1/4 | 2-56 x 1/4 slot bind nyl rohs () () | 1069 |
|
| Olander | CA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #0-80 x 3/8 | 0-80 x 3/8 but skt sst rohs () () | 503 |
|
| Olander | CA | Machine Screw | Nylon (Polyamide) | Plain | 4-40 x 3/4 phil flat nylon | () | 290 |
| |
| Olander | CA | Curved/Wave Spring Washer | Steel | Plain | wave spring stl .618 .440 .008 () () | 947 |
| |
| Olander | CA | Flat Washer | Nylon (Polyamide) | Plain | f/w nyl .511-.906-.125 () () | 199 |
| |
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | 400 Stainless (405, 410,416,420,430 etc.) | Painted | #8-15 x 1/2 | #8-15 x 1/2 self-piercing screws, 1/4 indented hex washer head unslotted, twin lead, full thread, sharp point, 410 stainless dacro 1000hr, head painted spanish green | 5,000 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | 1/2-13 light hex thin height flexslot 18-8 s/s steel w/wax 50fkf-813 | 37 |
|
| Eurolink | SC | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16 | M16 a2 18-8 304 steel nylon insert lock nut thin type din 985 | 2,400 |
|
| SPC | TX | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 12-24 nylon insert locknut steel zinc | 14000 |
| |
| FTS | OH | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | 5/16-18 x 3/4 | flange 5.2zyl | 8000 |
|
| Arden | WI | Hex Jam Nut | Steel | Plain | 1 1/8-12 | 1 1/8-12 hex fin nut jam pln | inquire |
|
| Arden | WI | Flat Washer | Steel | Zinc/Clear | .235 x .625 x .058 | .235x.625x.058 fw stl zc | inquire |
|
| Arden | WI | Socket Head Cap Screw | Steel | Black Oxide | M5-0.80 x 25 | M5 x.8x25 hxsoc cs blk | inquire |
|
| BHAM | TX | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 1/2-13 x 3 | 1/2-13x3 hvy hex bolt a325 full thread b18.2.1 b18.2.6 | 3 |
|
| THRDFAST | MS | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #8 x 3/4 | t-316 ss phil oval t/s b18.6.4 | 367 |
|
| THRDFAST | MS | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10 | nf-32x1 18-8 ss flat socket c/sr b18.2.1 b18.3 | 200 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 1 1/8-8 x 6 | astm a193 b7 all thread stud | 18 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M5-0.80 x 18 | socket c/s | 700 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4-7 x 6 1/2 | b7 studs tfe blue7 thread unc | 625 |
|
| Lightning | LA | Lock Nut, Nylon Insert | Grade 8 | Zinc/Yellow | 3/8-16 | gr. 8 nylon insert lock nut zinc | 2801 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M2-0.40 x 25 | socket c/s | 422 |
|
| Lightning | LA | Bent Anchor Bolt (J-Bolt, L-Bolt) | Grade 5 | Plain | 5/8-11 x 8 | l-anchor low carbon 2 hook / 4 thread length / | 154 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1-8 x 11 1/2 | 1-8x11-1/2 astm a193 b8m 1 all thread stud | 698 |
|
| Lightning | LA | Heavy Hex Nut | Steel | Plain | 1 5/8-8 | astm a194 gr. 4 heavy hex nut | 394 |
|
| Lightning | LA | Threaded Rod | Grade B8M | Plain | 1/2-13 x 12 | ft astm a193 b8m class 2 strain hardened all thread rod | 225 | < b>
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.

