FCH News

Buy from one of our FCH Network Members
SupplierLocTypeMaterialFinishSizeDescriptionQty 
OneMonroeNCMetal Drill BitsSteel27/6427/64 hss alfa usa jobber drill24
    Contact_Supplier
OneMonroeNCMetal Drill BitsSteel27/6427/64 hss alfa usa jobber drill bright2
    Contact_Supplier
OneMonroeNCMetal Drill BitsSteel15/3215/32 hss alfa usa jobber drill6
    Contact_Supplier
OneMonroeNCMetal Drill BitsSteel15/3215/32 hss alfa usa jobber drill bright4
    Contact_Supplier
OneMonroeNCMetal Drill BitsSteel0.182#14 hss alfa usa jobber drill6
    Contact_Supplier
OneMonroeNCMetal Drill BitsSteelk hss alfa usa jobber drill6
    Contact_Supplier
OneMonroeNCimport car fastener2
    Contact_Supplier
OneMonroeNCaluminum fascia track18
    Contact_Supplier
OneMonroeNCaluminum fascia track5
    Contact_Supplier
OneMonroeNCHard Hats & Head Protection2class iii bib pants 100% polyester refelctive 300d oxford fabric with pu coating fluorescent yellow with 2 horizontal refelctive 3m tape on leg3
    Contact_Supplier
JacksonMSBlind RivetAluminumPlain1/8 x 1/161/8x1/16 #41 aluminum blind rivet alcoa # 40221 (afa-41)124
    Contact_Supplier
JacksonMSBlind RivetAluminumPlain1/8 x 5/81/8x5/8 #410 aluminum blind rivet alcoa # 40225 (afa-410)943
    Contact_Supplier
JacksonMSBlind RivetAluminumPlain5/32 x 5/85/32x5/8 #510 aluminum blind rivet alcoa # 40238 (afa-510)926
    Contact_Supplier
JacksonMSBlind RivetAluminumPlain5/32 x 1/45/32x1/4 #54 aluminum blind rivet large alcoa # 40244 (afa-54)6101
    Contact_Supplier
JacksonMSBlind RivetAluminumPlain1/4 x 3/41/4x3/4 #812 aluminum blind rivet alcoa # 42289 (afa-812)533
    Contact_Supplier
JacksonMSBall Bearings, Balls, Bearing MountsSteelZinc/Clear1/4-281/4-28 sae-lt 65 degree taper thread grease fitting individual zinc clear trivalent sae j535 surface ball check 3010b or equal100
    Contact_Supplier
JacksonMSSplit Lock WasherSteelPlain11lock bearing w 2.182 bore diameter 17 tangs grade c1006/1008 3.109 od .053 thick fag schaeffler group no w1
    Contact_Supplier
OneMonroeNCPipes2-62-6 schedule 40 pipe sleeve fastener200
    Contact_Supplier
OneMonroeNCQuick Access Panel Fasteners (1/4 Turn etc.)300 Stainless (A1,A2, 18-8,304,310 etc.)1/41/4-turn fastener-retaining washer ss9
    Contact_Supplier
OneMonroeNCFully Threaded Stud (All Thread)SteelZinc/Yellow1/4-20 x .3121/4-20 x .312 hex length (zinc yellow) stud-nutsb inner fastener964
    Contact_Supplier
OneMonroeNCCable Clamps & Ties0.21cable tie mount fastener mount two way 0.21 maximum tie width white. same as micro 23ta0055035
    Contact_Supplier
OneMonroeNCMachine Screw300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#6-32 x 3/4ms24693-c30 dfars ref w/patch this item should be furnished with a commercial patch instead of a military patch only when supplying to customer #110153915
    Contact_Supplier
OneMonroeNCHelical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.)SteelPlain#6-32 x 1.5nas1130-06-15d dfars148
    Contact_Supplier
OneMonroeNCMachine Screw300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#4-40 x 1/2nas1635-04-8 dfars 252.225-7014 applies225
    Contact_Supplier
OneMonroeNCSplit Lock WasherSteelPlain#10nas1640-10 dfars 252.225-7014 applies15
    Contact_Supplier
OneMonroeNCDowel Pin300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#6nas1676c6 dfars 252.225-7014 applies955
    Contact_Supplier
OneMonroeNCFlat Washer300 Stainless (A1,A2, 18-8,304,310 etc.)Passivated.102 x .175 x .016nas620-c3l dfars 252.225-7014 applies900
    Contact_Supplier
OneMonroeNCFlat Washer300 Stainless (A1,A2, 18-8,304,310 etc.)Plain1/4 x 15/321/4 x15/32 o.d. fw 18-8 dfars 252.225-7009 applies18
    Contact_Supplier
OneMonroeNCSocket Head Cap ScrewClass 12.9Zinc/ClearM6 x 12make per print-107718-55 m6 x 12mm shcs 12.9 dfars certified w/test reports-zinc pl & bake per astm b633 class fe/zn8 sc2 type ii-must be processed by lockheed approved processor-fm callahan-lm q0000004607
    Contact_Supplier
CenturyFLTie Rod (Brace Rod, Double End Rod)Plain#5-40 x 24.675esb12042-014 tie rod per print a580-304 5-40 x 24.67 125k psi tensile k-195 rev.ab _x000d_po spec e451 (manufacturing practices & tolerances machine parts) _x000d_po spec e602 (fabrication & acceptance conditions for metallic nuclear crtg.hardware)143
    Contact_Supplier
CenturyFLSelf-Clinching Stud300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#8-32 x 1/2captive fast. chs832-8 #8-32 x 1/2 self-clinching threaded studs stainless steel1000
    Contact_Supplier
CenturyFLButton Head Socket Cap Screw300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#10-32 x 1/210-32 x 1/2 socket button cap screw stainless steel dfars compliant5425
    Contact_Supplier
CenturyFLFlat Washer300 Stainless (A1,A2, 18-8,304,310 etc.)Plain3.2 x 7.0 x 0.80bokers c173467 m3 f/w s/s dfars 3.2 x 7.0 x 0.80600
    Contact_Supplier
CenturyFLHigh Collar Split Lock Washer300 Stainless (A1,A2, 18-8,304,310 etc.)PlainM4m4 s/s dfars din 798047475
    Contact_Supplier
CenturyFLMachine ScrewClass 12.9Zinc/YellowM1.6 x 4m1.6 x 4mm slotted flat m/s gr. 12.9 dfars w/zinc yellow plate q2f iso 200925000
    Contact_Supplier
CenturyFLGrommets & EyeletsNylon (Polyamide)#10fastex 242-180602-91-0101 #10 nylon grommet25000
    Contact_Supplier
CenturyFLInternal Thread Insert (Rivet Nut, Well Nut, Jack Nut)SteelZinc/Clearcaptive fasteners c518-15/16-18 self clinching nut steel zinc1958
    Contact_Supplier
CenturyFLMachine Screw300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#4-40 x 1/44-40 x 1/4 slottedpan hd m/s 18-8 dfars16525
    Contact_Supplier
CenturyFLSocket Head Cap ScrewnullZinc/Yellow1/4-28 x 5/81/4-28 x 5/8 socket cap screw alloy zinc yellow dfars/nadcap5423
    Contact_Supplier
CenturyFLT-Nut (Tee Nut)Plain#10-24 x 7/16stafast #hf102474cb3-db 10-24x7/16 t-nut hopper feed5000
    Contact_Supplier
CenturyFLMachine Screw300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#2-56 x 1/22-56 x 1/2 slottedflat hd m/s 18-8 dfars24550
    Contact_Supplier
CenturyFLMachine Screw300 Stainless (A1,A2, 18-8,304,310 etc.)Plain#2-56 x 1/22-56 x 1/2 slottedpan hd m/s 18-8 dfars22750
    Contact_Supplier
CenturyFLPropell Nut (Hurricane Nut)SteelZinc/Clear5/16-185/16-18 propel nut zinc plated stafast p561810t-zn3900
    Contact_Supplier
CenturyFLCabinet Screw (Particle Board Screw, MDF Screw)SteelPlain#8 x 18 x 1 3/4 phil. flat woodscrew twinfast steel/black3873
    Contact_Supplier
CenturyFLRound Female/Female StandoffSteelZinc/Clearfascomp pn fc4500-4 standoff stl zn clr raf eq 4500-440-s-123262
    Contact_Supplier
CenturyFLFlat Washer300 Stainless (A1,A2, 18-8,304,310 etc.)PlainM1.6m1.6 s/s dfars iso 70895000
    Contact_Supplier
CenturyFLFlat Washer300 Stainless (A1,A2, 18-8,304,310 etc.)PlainM4m4 flat washer 18-8 s/s dfars compliant iso 70924500
    Contact_Supplier
CenturyFL40mm fan gaurd e2a 376
    Contact_Supplier
CenturyFLfastener spec. fsc/md-12a01pf 4
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#4-40 x 5/16#4-40x5/16 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#4-40 x 3/8#4-40x3/8 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#6-32 x 3/8#6-32x3/8 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#4-40 x 7/16#4-40x7/16 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#6-32 x 7/16#6-32x7/16 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#8-32 x 5/8#8-32x5/8 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#6-32 x 1/2#6-32x1/2 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#8-32 x 1/2#8-32x1/2 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#8-32 x 3/8#8-32x3/8 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#10-32 x 1/2#10-32x1/2 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#10-32 x 3/8#10-32x3/8 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILThumb Screw (Plain)AluminumPlain#10-32 x 5/8#10-32x5/8 knurled thumb screw with washer face full thread aluminum1000
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow3/8-16 x 1 1/43/8-16x1 1/4 , military socket head cap screw cadmium yellow dfar ms16997-100500
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow3/8-16 x 1 3/43/8-16x1 3/4 , military socket head cap screw cadmium yellow dfar ms16997-102250
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow3/8-16 x 1 1/23/8-16x1 1/2 , military socket head cap screw cadmium yellow dfar ms16997-101500
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow3/8-16 x 2 1/43/8-16x2 1/4 , military socket head cap screw cadmium yellow dfar ms16997-104250
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow3/8-16 x 23/8-16x2 , military socket head cap screw cadmium yellow dfar ms16997-103250
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow#6-32 x 1/2#6-32x1/2 , military socket head cap screw cadmium yellow dfar ms16997-201000
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow#6-32 x 1/4#6-32x1/4 , military socket head cap screw cadmium yellow dfar ms16997-181000
    Contact_Supplier
Kanebridge ILSocket Head Cap ScrewSteelCadmium/Yellow#6-32 x 1#6-32x1 , military socket head cap screw cadmium yellow dfar ms16997-241000
    Contact_Supplier

Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.