| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Global | CA | fp301-1/2-6-assorted-10-14 pc pks 3m 1/2 2 1 thin wall 6 assorted 14 pcs/pk 10 pks per pack 1/2 2 1 thin wall 6 assorted 14 pcs/pk 10 pks per pack | 10 |
| ||||
| Global | CA | fp301-1/4-6-assorted-10-21 pc pks 3m 1/4 2 1 thin wall 6 assorted 21 pcs/pk 10 pks per pack 1/4 2 1 thin wall 6 assorted 21 pcs/pk 10 pks per pack | 10 |
| ||||
| Global | CA | fp301-1/8-6-assorted-10-28 pc pks 3m 1/8 2 1 thin wall 6 assorted 28 pcs/pk 10 pks per pack 1/8 2 1 thin wall 6 assorted 28 pcs/pk 10 pks per pack | 10 |
| ||||
| Global | CA | Service & Repair Kits | Steel | Black Oxide | fp301-3/16 to 1-black-5-102 pc kits 3m 3/16 to 1 2 1 thin wall 6 black 102 pc/kit 5 kits per kit 3/16 to 1 2 1 thin wall 6 black 102 pc/kit 5 kits per kit | 1 |
| |
| Global | CA | fp301-3/8-6-assorted-10-14 pc pks 3m 3/8 2 1 thin wall 6 assorted 14 pcs/pk 10 pks per pack 3/8 2 1 thin wall 6 assorted 14 pcs/pk 10 pks per pack | 10 |
| ||||
| Global | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | 5290-h global-tek led spacer 0.187 odx0.290 lx0.063 id 0.187 odx0.290 lx0.063 id | 4,900 |
| |
| Global | CA | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 3/8 | f/f s/o 1/4 hexx3/8 l 6-32 thd ss/pa | 7 |
|
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M3-0.50 x 6 | torx pan a2 ss passivate passivate iso 14583 | 3,011 |
|
| Global | CA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M3-0.50 x 6 | torx button cap a2 ss passivate passivate iso 7380 | 249 |
|
| Global | CA | Machine Screw | Nylon (Polyamide) | Plain | M4-0.70 x 12 | slotted pan m/s a a din 85 | 740 |
|
| Global | CA | Flat Washer | Nylon (Polyamide) | Plain | 5023-n-125 flat 0.250 odx0.020 thx0.125 id 0.250 odx0.020 thx0.125 id | 2,500 |
| |
| Global | CA | Round Spacer | Brass | Zinc/Clear | 1/4 | spacer rndx1/8 lx#6 (0.140) id / | 504 |
|
| Global | CA | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 1 3/16 | f/f s/o 3/16 hexx1-3/16 l 4-40 thd ss/pa | 25 |
|
| Global | CA | Hex Female/Female Standoff | 3/16 x 1 3/8 | f/f s/o 3/16 hexx1-3/8 l 4-40 thd al | 22,030 |
| ||
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 18 | torx pan 18-8 ss ss iso 14583 | 1,000 |
|
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M3-0.50 x 25 | phil pan m/s a2 18-8 ss passivate a passivate a din 7985 | 5 |
|
| OneMonroe | NC | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-14 | 7/8-14 hex fin jam nut stainless | 4 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1/2-13 x 5 | b7 stud | 64 |
|
| OneMonroe | NC | Sleeve Anchor | Steel | Plain | 7/8 | 7/8 bolt insulating sleeve | 78 |
|
| OneMonroe | NC | Cushioned Pipe & Tube Loop Clamp | Nylon (Polyamide) | 7/8 | 7/8 nylon tubing clamp (natural) | 320 |
| |
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 7/8 | 7/8 std int l/w efi stl znc | 1725 |
|
| OneMonroe | NC | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8 | 7/8 split lockwasher stainless | 66 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Zinc/Clear | 1 x 1/8 | 7/8-27 specl hex nut 1 x 1/8 stl znc | 12000 |
|
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 7/8 x 12 | 7/8 x 12 (drill depth) spline bit | 2 |
| |
| OneMonroe | NC | Hole Saws | Steel | 7/8 x 1/8 | 7/8 x 1/8 carbide tipped hole saw champion | 2 |
| |
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 7/8 x 15 | 7/8 x 15 hilti te-60 carbide perc-bit | 2 |
| |
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 7/8 x 16 | 7/8 x 16 (drill depth) sds carbide bit | 1 |
| |
| OneMonroe | NC | Hammers & Mallets | 7/8 x 6 | 7/8 x 6 (overall) perc. hammer bit | 6 |
| ||
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 7/8 x 6 | 7/8 x 6 (drill depth) sds carbide bit | 1 |
| |
| OneMonroe | NC | Milling Cutters (End Mills, Face Mills etc.) | Steel | 7/8 x 5/8 | 7/8 x 5/8 high speed single end 2 flute end mill | 2 |
| |
| OneMonroe | NC | Pipe Coupling, Pipe Connector | Brass | 7/8 x 3/4 | 7/8 x 3/4 female flare coupling brass | 20 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 7/8 | 7/8 colbalt s & d drill (1/2 shank) | 2 |
| |
| OneMonroe | NC | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 7/8 | 7/8 external tooth l/w plated | 98 |
|
| OneMonroe | NC | Split Lock Washer | Steel | Plain | 7/8 | 7/8 split lockwasher | 42 |
|
| OneMonroe | NC | Split Lock Washer | 316, 317, A4 Stainless | Plain | 7/8 | 7/8 split lockwasher 316 stainless | 16 |
|
| OneMonroe | NC | SAE Flat Washer | Steel | Zinc/Clear | 7/8 | 7/8 sae flat washer packaged plated | 4 |
|
| OneMonroe | NC | SAE Flat Washer | Steel | Zinc/Clear | 7/8 | washer 7/8 s a e flat washer zinc 50#/ctn | 65 |
|
| OneMonroe | NC | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | round standoff ss id-0.266 od-0.375 thk-0.055 | 550 |
| |
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1/2-13 x 7 3/4 | b7 stud | 1 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/2-8 x 5 | b7 stud | 1 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 3/4 | 8-32 x 1 3/4 slottedflat m/s pkg plated | 300 |
|
| OneMonroe | NC | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/16 | 8-32 x 3/16 soc set 1/2 dog pt 18-8ss | 50 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #8-32 x 1/4 | 8-32 x 1/4 phillips flat m/s plated | 88 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/16 | 8-32 x 5/16 ind hex hd m/s 18-8ss | 900 |
|
| OneMonroe | NC | Set Screw (Socket Head) | Steel | Plain | #8-32 x 3/8 | 8-32 x 3/8 soc set cup pt efi stl | 2050 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/4 | 8-32 x 3/4 ind hex hd m/s 18-8ss | 870 |
|
| OneMonroe | NC | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Zinc/Clear | #8-32 x 3/4 | 8-32 x 3/4 one-way round m/s plated | 75 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/4 | 8-32 x 3/4 slottedbinder m/s u/cut stl znc | 6400 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/4 | 8-32 x 3/4 slottedflat m/s stainless | 100 |
|
| OneMonroe | NC | Machine Screw | Brass | Plain | #8-32 x 3/4 | 8-32 x 3/4 slottedflat m/s brass | 200 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Phosphate | #8-32 x 3/4 | 8-32 x 3/4 ph pan hd tcs t-23 stl dry phos fin | 23780 |
|
| OneMonroe | NC | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 0.8 (M4-0.70) | 18-8 stainless steel precision shoulder screw 6 mm shoulder diameter 4 mm shoulder length m5 x 0.8 mm thread (pack of each) | 200 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | caster swivel top plate wheel sz 10 x 3 wheel mat polyurethane on iron bearing roller w/cam brake top plt sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load ht 12-1/2 load cap 3000 lbs | 4 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M5 x 0.8 | passivated 18-8 stainless steel phillips flat head screw m5 x 0.8 mm thread 20 mm long (pack of 50) | 300 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Plain | drum rackstl4wheel23hx16w700lb cap | 1 |
| |
| OneMonroe | NC | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3 | thread-forming screws for thin plastic zinc-plated steel m3 size 8 mm long | 25 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 2-8 x 14 | b7 stud | 2 |
|
| OneMonroe | NC | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 1 3/4 | 1/4-20 x 1-3/4 dril-flex structural self-drilling screws 3/8 hex washer head #5 point alloy steel with stalgard | 100 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6-1.0-1.00 x 16 | m6-1.0 x 16 10.9 indented hex head flange bolt-14mm od flange-10mm hex-jis din b1189-zinc-50pk | 2 |
|
| OneMonroe | NC | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 3/4-10 x 4 3/4 | 3/4-10x4 3/4 (pt) a325 type-1 heavy hex structural bolt coarse plain (usa) (bulk qty 250pcs ) | 150 |
| |
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 6-lobe flat head zinc finish type-f point floorboard thread cutting screw | 100 |
|
| OneMonroe | NC | Turnbuckles | 316, 317, A4 Stainless | Plain | 316 stainless steel turnbuckle-hook-to-hook-200 lbs. capacity-1/4 diameter x 6-1/2 retracted length x .38 eye opening | 40 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 1 1/2 | 2-1/2 swivel caster with so ft rubber wheel & 5/16 x 1-1/2 threaded stem. | 2 |
|
| OneMonroe | NC | Solid Rivet | Aluminum | Plain | 1/8 x 5/16 | rivet solid brazier hd. 1/8 x 5/16 1100 aluminum | 1900 |
|
| OneMonroe | NC | Handles | Aluminum | 18 x 60 | hand truck aluminum general purpose solid rubber 10 wheel frame size 18 x60 nose plate 18 x7-1/2 solid plate standard loop handle w/comfort grip straight back 52 hi u extension load capacity 500 lbs | 1 |
| |
| OneMonroe | NC | Handles | Aluminum | 18 x 7 1/2 | hand truck aluminum straight back with center strap double verticle loop handle 55 load height 10 4-ply pneumatic wheels sealed precision bearings 18 x7-1/2 steel nose plate stair climbers load capacity 600 lbs | 2 |
| |
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | Steel | Plain | 3 x 19 | shim roof 3x19 3mm | 50 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 6 1/2 x 7 1/2 | caster thrust swivel section plate wheel sz 8 x 4 wheel mat cast iron gray enamel finish bearing roller load ht 10-1/2 top plate sz 6-1/2 x 7-1/2 bolt hole ptrn 4-1/2 x 6 load cap 6000 lbs | 2 |
|
| OneMonroe | NC | Latches & Catches | push release latch | 4 |
| |||
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 7/8 x 4 | nc b-8 stud (304 stainless ) | 47 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 1 |
| |||
| OneMonroe | NC | Handles | Aluminum | 18 x 9 | hand truck keg back blue powder coat aluminum keg hook tread brake cable curve back double grip handle 56 load height 10 4-ply pneumatic wheels sealed precision bearings 18 x9 steel nose plate stair climbers load capacity 600 lbs | 1 |
| |
| OneMonroe | NC | Handles | 18 x 9 | hand truck with 62 double grip handle flat back with 2 straps 18 x 9 solid flush mount nose plate pneumatic wheels stair climbers kick bar & disc brakes | 1 |
| ||
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | Steel | Plain | M1 | shim side door motor 1mm | 1 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | swivel plate caster (25273) | 55 |
| |||
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain | 7/8 x 3 5/8 | caster rigid plate wheel sz 5 x 1 1/4 wheel mat so ft rubber bearing plain bore load ht 6 1/8 top plt sz 2 7/8 x 3 5/8 bolt hole ptrn 1-3/4 x 2-15/16 load cap 200 lbs temp rt-40 to +158 f | 71 |
|
| OneMonroe | NC | Plate Washer (Square & Rect.) | Steel | Plain | 1/8 x 4 1/8 | cstrrigid4x1 1/4 hard rbbrthread guards3 1/8 x 4 1/8 top plate | 16 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 1 |
| |||
| OneMonroe | NC | Cotter Pin (Split Pin) | Aluminum | Plain | 18 x 9 | hand truck aluminum disk brake 60 single pin handle 18 x9 extruded aluminum nose plate 10 pnuematic wheels stair climber pull bar wheel guards load capacity 600 lbs. | 1 |
|
| OneMonroe | NC | Latches & Catches | latch | 2 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 1 |
| |||
| OneMonroe | NC | Hinges | Aluminum | 1/2 | hinge continuous 2.00 open .050 thick alum 1/2 knuckle .1/8 pin x 72.00 long | 5 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130499 | 15 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 1 |
| |||
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | shim endportal 20ga ss | 300 |
| |
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | shim endportal 11ga ss | 362 |
| |
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M1 | shim upper ariculation ss 1mm | 200 |
|
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2 | shim upper ariculation ss 2mm | 200 |
|
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 | shim upper ariculation ss 3mm | 204 |
|
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | Steel | Plain | M5 | shim cab ceiling frnt 5mm al | 40 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | #4-40 x 1/2 | nc button hd socket c/s pl | 2110 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M10-1.50-1.50 x 50 | m10 x 1.50 x 50 full thread hhc/s 10.9-zp | 75 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M10-1.50-1.50 x 70 | m10 x 1.50 x 70 full thread hhc/s 10.9-yz | 80 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75-1.75 x 40 | m12 x 1.75 x 40 full thread hhc/s 10.9-yz | 80 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M12-1.75-1.75 x 40 | m12 x 1.75 x 40 full thread hhc/s 10.9-zp | 40 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75-1.75 x 45 | m12 x 1.75 x 45 full thread hhc/s 10.9-yz | 80 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M16-2.00-2.00 x 80 | m16 x 2.0 x 80 full thread hhc/s 10.9-zp | 58 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M22-2.5-2.50 x 70 | m22 x 2.5 x 70 full thread hhc/s 10.9-yz | 5 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M22-2.5-2.50 x 80 | m22 x 2.5 x 80 full thread hhc/s 10.9-yz | 6 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M24-3.00-3.00 x 100 | m24 x 3.0 x 100 full thread hhc/s 10.9-yz | 5 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M24-3.00-3.00 x 120 | m24 x 3.0 x 120 full thread hhc/s 10.9-yz | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M24-3.00-3.00 x 140 | m24 x 3.0 x 140 full thread hhc/s 10.9-plain | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M6-1.00-1.00 x 10 | m6 x 1.0 x 10 cl 10.9 full thread hx hd c/s-yz | 50 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M6-1.00-1.00 x 45 | m6 x 1.0 x 45 cl 10.9 hx hd c/s-yz | 74 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M6-1.00-1.00 x 50 | m6 x 1.0 x 50 cl 10.9 hx hd c/s-yz | 50 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M6-1.00-1.00 x 55 | m6 x 1.0 x 55 cl 10.9 hx hd c/s-yz | 75 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M6-1.00-1.00 x 80 | m6 x 1.0 x 80 cl 10.9 hx hd c/s-yz | 72 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M8-1.25-1.25 x 60 | m8 x 1.25 x 60 cl 10.9 hx hd c/s-yz | 43 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25-1.25 x 60 | m8 x 1.25 x 60 cl 10.9 hx hd c/s-zp | 50 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M8-1.25-1.25 x 70 | m8 x 1.25 x 70 cl 10.9 hx hd c/s-yz | 50 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25-1.25 x 70 | m8 x 1.25 x 70 cl 10.9 hx hd c/s-zp | 50 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | 1/4 x 1 1/4 | nc button hd socket c/s pl | 1521 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M14-2.0-2.00 x 100 | m14 x 2.0 x 100 cl 10.9 hx hd c/s-yz | 135 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M16-2.00-2.00 x 75 | m16 x 2.0 x 75 cl 10.9 hx hd c/s-yz | 96 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M16-2.00-2.00 x 90 | m16 x 2.0 x 90 cl 10.9 hx hd c/s-zp | 34 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M16-2.00-2.00 x 150 | m16 x 2.0 x 150 cl 10.9 hx hd c/s-yz | 1 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M16-2.00-2.00 x 260 | m16 x 2.0 x 260 cl 10.9 hx hd c/s-yz | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M18-2.5-2.50 x 55 | m18 x 2.5 x 55 cl 10.9 full thread hx hd c/s-yz | 25 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M18-2.5-2.50 x 160 | m18 x 2.5 x 160 cl 10.9 hx hd c/s-zp | 1 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M18-2.5-2.50 x 180 | m18 x 2.5 x 180 cl 10.9 hx hd c/s-zp | 1 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M20-2.50-2.50 x 60 | m20 x 2.5 x 60 cl 10.9 hx hd c/s-zp | 35 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M20-2.50-2.50 x 65 | m20 x 2.5 x 65 cl 10.9 hx hd c/s-zp | 35 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M20-2.50-2.50 x 70 | m20 x 2.5 x 70 cl 10.9 hx hd c/s-yz | 31 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M20-2.50-2.50 x 70 | m20 x 2.5 x 70 cl 10.9 hx hd c/s-zp | 55 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M20-2.50-2.50 x 150 | m20 x 2.5 x 150 cl 10.9 hx hd c/s-yz | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M22-2.5-2.50 x 40 | m22 x 2.5 x 40 cl 10.9 full thread hx hd c/s-yz | 55 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M22-2.5-2.50 x 80 | m22 x 2.5 x 80 cl 10.9 hx hd c/s-yz | 25 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M22-2.5-2.50 x 140 | m22 x 2.5 x 140 cl 10.9 hx hd c/s-zp | 1 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M22-2.5-2.50 x 260 | m22 x 2.5 x 260 cl 10.9 hx hd c/s-zp | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M22-2.5-2.50 x 280 | m22 x 2.5 x 280 cl 10.9 hx hd c/s-zp | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M22-2.5-2.50 x 300 | m22 x 2.5 x 300 cl 10.9 hx hd c/s-zp | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 10.9 | Plain | M24-3.00-3.00 x 40 | m24 x 3.0 x 40 cl 10.9 full thread hx hd c/s-yz | 45 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | 5/8 x 1 1/4 | nc button hd socket c/s pl | 48 |
|
| OneMonroe | NC | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain | 3/16 x 3 3/4 | 3/16 x 3-3/4 slotted h/w/h concrete screw | 100 |
|
| OneMonroe | NC | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain | 1/4 x 3 | 1/4 x 3 slotted h/w/h concrete screw | 75 |
|
| OneMonroe | NC | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain | 3/16 x 1 3/4 | 3/16 x 1-3/4 phillips flat masonry screw | 100 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 3/4-8 x 14 | b7 stud | 25 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 8 1/4 | b7 stud | 4 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 7/8-9 x 4 1/4 | b7 stud | 294 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/4-8 x 9 3/4 | b7 stud | 64 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 5/8-8 x 14 1/2 | b7 stud | 3 |
|
| Jay-Cee | MI | Installation & Setting Tools | 700a60 seal guide | inquire |
| |||
| Jay-Cee | MI | Wrenches | 700a61 piston rod wrench | inquire |
| |||
| Jay-Cee | MI | Installation & Setting Tools | power cylinder tool | inquire |
| |||
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 13 1/4 | b7 stud | 10 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 1 5/8-8 x 11 | 1 5/8-8 tpix11-1/2 astm a193 b-8 class 2 stainless fully threaded stud | 24 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | 1/4 x 3/8 | nc button hd socket c/s pl | 563 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | 5/16 x 2 1/2 | nc button hd socket c/s pl | 1 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | 3/8 x 7/8 | nc button hd socket c/s pl | 560 |
|
| Jackson | MS | Button Head Socket Cap Screw | Steel | Plain | 3/8-24 x 1/2 | nf button hd socket c/s pl | 2 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Steel | Plain | 2 3/4-8 x 19 1/2 | astm a193-b7 stud | 16 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3-8 x 28 1/2 | a193 b7 fully threaded stud finish end/end | 2 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 16 1/2 | b7 stud | 2 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 1 1/2-8 x 9 | 1 1/2-8 tpix9-1/2 e/e astm a193 b-8 stud (304 ss) class 1 | 22 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 3/4 x 6 1/2 | nc b-8 stud (304 stainless ) | 9 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 5/8 x 4 3/4 | nc b-8 stud (304 stainless ) | 10 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 5/8-11 x 9 | oal b7 stud | 20 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/2-8 x 14 | b7 stud | 4 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/2-8 x 18 | b7 stud | 8 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 5/8 x 5 1/2 | nc b-8 stud (304 stainless ) | 17 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Steel | Plain | 1-8 x 36 | oal astm a193-b7 fully threaded stud finish both ends grade stamped | 20 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 36 | tpi oal astm a193-b7 fully threaded stud finish both ends grade stamped b7 rod | 15 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Steel | Plain | 5/8-11 x 36 | oal astm a193-b7 fully threaded stud finish grade stamped both ends | 25 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Steel | Plain | 3/4-10 x 36 | oal astm a193-b7 fully threaded stud finish both ends grade stamped | 25 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.

