3/8 Zinc Alloy Hammer Drive Anchor
Zinc Alloy Hammer Drive Anchors, also called Zamac Nail-In Anchors, are light-duty nail drive expansion anchors for use in concrete, block, brick, or stone and. They are similar in design to a Nylon nail-In Anchor, but they are made from a soft zinc-based alloy (zamac), are tamper and corrosion resistant and are hammered into pre-drilled holes. The nail acts as an expansion and locking pin.
8 results, (click on any line for more information)
Buy Zinc Alloy Hammer Drive Anchor from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
ISSCO | MO | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 3/8 x 2 | anchor hammer drive split | 400 |
|
METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 3/8 x 2 3/8 | hammer drive anchor /y | 160 |
|
METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 3/8 x 3 1/2 | hammer drive anchor /y | 75 |
|
METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 3/8 x 4 3/4 | hammer drive anchor /y | 75 |
|
Valley Nu | WA | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 3/8 | single machine bolt anchor zamac | 8 |
|
Delta | TX | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | metal screw in anchor alloy zinc zamac 3/8 140203 dwas8b 1 thick wall for #8 screw | 15795 |
| |
Delta | TX | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1 3/8-1 1/2 | hammer drive pingrip 1/4 [ 1 3/8-1 1/2 | 745 |
|
AFI | FL | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 3/8-16 | 3/8-16 machine screw anchor zamac alloy () | 3700 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.