FCH Member Advertisement
1/2 Zinc Alloy Hammer Drive Anchor
Zinc Alloy Hammer Drive Anchors, also called Zamac Nail-In Anchors, are light-duty nail drive expansion anchors for use in concrete, block, brick, or stone and. They are similar in design to a Nylon nail-In Anchor, but they are made from a soft zinc-based alloy (zamac), are tamper and corrosion resistant and are hammered into pre-drilled holes. The nail acts as an expansion and locking pin.
8 results, (click on any line for more information)
| Buy Zinc Alloy Hammer Drive Anchor from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| ISSCO | MO | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 x 2 1/4 | anchor hammer drive split | 650 |
|
| METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 x 2 3/4 | hammer drive anchor /y | 50 |
|
| METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 x 3 1/2 | hammer drive anchor /y | 50 |
|
| METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 x 4 3/4 | hammer drive anchor /y | 25 |
|
| METRO IND | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 x 6 | hammer drive anchor /y | 50 |
|
| Alma Bolt | MI | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 x 2 3/ | #c-4070 4 hammer-drive anchor anc-c-a | 288 |
|
| Delta | TX | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1 3/8-1 1/2 | hammer drive pingrip 1/4 [ 1 3/8-1 1/2 | 745 |
|
| SWACO | OH | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain | 1/2 | 1/2 conduit lock nut zamac #3 zinc alloy | 800 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
