FCH Member Advertisement
FCH News
2 inch length Thread Rolling Screws
Thread Rolling Screws, also called Swageform Screws or Plastic Screws are designed to be screwed into a pre-formed hole in plastic. The form of the screw thread is such that the plastic is deformed by flowing around the thread rather than cut, and leads to a secure joint.
99 results, (click on any line for more information)
| Buy Thread Rolling Screws from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Bostwick | IN | Self-Tapping Thread Rolling Screw | Steel | Plain | 1/4-20 x 2 | 1/4-20 x 2 swageform screw h/w/h | 34250 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Plain | 1/4-20 x 2 | 1/4-20 x 2 slotted ind. hex wa-hd thread rolling screw (STEEL TRIVALENT ZINC CLEAR) (STEEL TRIVALENT ZINC CLEAR) | 500 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-18 x 2 | 8-18x2 phil pan hi-lo screw steel zinc | 1150 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Plain | 3/8-16 x 2 | 3/8-16 x 2 unslt ind hex wash head rolok (STEEL ZINKLAD 1000 W/ WAX) (STEEL ZINKLAD 1000 W/ WAX) | 44855 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Plain | #12-24 x 2 | 12-24 x 2 ind hex-wa hd thread rolling screw (1 1/2 THREADED) (1 1/2 THREADED) () | 4100 |
|
| Hayes | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8 x 2 | #8 x 2 phil pan tri-lobe screw 48-2 zinc | 701 |
|
| Cal Fastenrs | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20x2 ulslotted hwh t.f. plated-waxed see euw | 3,000 |
|
| Irwin Ind | Ont | Self-Tapping Thread Rolling Screw | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/16-18 x 2 | 5/16-18 x 2 unslotted indented hex washer head tri-lobular thread rolling screw. finish to be js500 zinc base plate + magni 560 with 2 layers of b18 topcoat b18.6.4 | 15100 |
|
| ASMC | IL | Self-Tapping Thread Rolling Screw | Steel | Plain | 1/4-20 x 2 | (ft) coarse square set cup pt low carb case hard ejot | 804 |
|
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20 x 2 indented hex washer slotted or unslotted tri-lobe metal tf scr triv znc | 35300 |
|
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Phosphate | 5/16-18 x 2 | 5/16-18 x 2 pan 6-lobe swageform metal tf scr blk phos | 21028 |
|
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Black Oxide | 1/4-20 x 2 | 1/4-20 x 2 flat under cut Phillips tri lobe black oxide | 37992 |
|
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Black Oxide | 1/4-20 x 2 raised flat phil tri-lobe metal tf scr blk ox per print | 26 |
| |
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Phosphate | 1/4-20 x 2 flat phil tri-lobe metal tf scr blk phos (2000 per) | 306 |
| |
| MTP | CA | Self-Tapping Thread Rolling Screw | Steel | Plain | 3/8-16 x 2 | 3/8-16 x 2 st/zn ind hwh thread forming | 26,100 |
|
| Century | NY | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 slot ind. hex wa-hd taptite steel trivalent zinc clear | 500 |
| |
| Century | NY | Self-Tapping Thread Rolling Screw | Steel | Plain | 12-24 x 2 ind hex-wa hd taptite 1 1/2 threaded | 4100 |
| |
| Century | NY | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 unslotted indented hex washer taptite steel rohs compl zinc clr | 280 |
| |
| Liberty | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/2-13 x 2 | hex washer thread forming | 50 |
|
| Liberty | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | unslotted hex washer | 250 |
|
| Komar | AR | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 10-32 x 2 unslot hex washer t/s taptite zinc & wax wax | 500 |
| |
| Komar | AR | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10 x 2 phillip (#8) pan head t/s high-low 18-8 ss | 500 |
| |
| American | NY | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | 3/8-16 x 2 hex washer thread rolling screw zinc plate | 272 |
|
| American | NY | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/2 x 2 | 1/2 x 2 hex washer thread rolling screw thread forming screw zinc plate | 315 |
|
| Alma Bolt | MI | Self-Tapping Thread Rolling Screw | Steel | Plain | #8 x 2 | hex washer pierce pt (needle) | 3600 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | 3/8-16 x 2 unslotted indented hex washer head trilobe thread forming screw case hardened steel trivalent zinc, bake & wax rohs compliant | 2363 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20 x 2 phillips pan head trilobe thread forming screw case hardened steel trivalent zinc, bake & wax rohs compliant | 4754 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20 x 2 unslotted indented hex washer head trilobe thread forming screw case hardened steel trivalent zinc, bake & wax rohs compliant | 4291 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18 x 2 unslotted indented hex washer head trilobe thread forming screw case hardened steel trivalent zinc, bake & wax rohs compliant | 25922 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20 x 2 slotted indented hex washer head trilobe thread forming screw case hardened steel trivalent zinc, bake & wax rohs compliant | 5512 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | phillips pan trs full tri-lobe h t & clear bake wax SAE j81 | 1,200 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-10 x 2 | phillips pan t/l 48 deg tri-lobe tfs for plastic ht & clr SAE j933 | 1,200 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | unslotted indented hex washer trs tri-lobe h t & clear bake wax SAE j81 | 400 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | slotted indented hex washer trs tri-lobe h t & clear bake wax SAE j81 | 1,200 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | slotted indented hex washer trs tri-lobe h t & clear bake wax SAE j81 | 500 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-10 x 2 | phillips flat t/l 48 deg tri-lobe tfs for plastic h t & clr SAE j933 | 1,200 |
|
| XL Screw | GA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | unslotted indented hex washer trs tri-lobe h t & clear bake wax SAE j81 | 1,500 |
|
| MESAFAST | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | slotted indented hwh thread rolling screwzc | 30.0 |
|
| NutsBolts | NE | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10 x 2 | 10x2 6-lobe pan thread rolling screw equal zp | 71870 |
|
| NutsBolts | NE | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 | 1/4-20x2 indented hwh thread rolling screw screw ss | 32745 |
|
| Empire | WA | Self-Tapping Thread Rolling Screw | Steel | Plain | 1/4-20 x 2 | 1/4-20 x 2 hwh 3-lob tfs | 20 |
|
| SII | IN | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18 x 2 hex-unslotted drive indented hex washer head zinc finish steel thread rolling screw b18.6.4 | 125 |
|
| WDMB | IA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | screw thread rolling hex washer head st (zn) 5/16-18x2 (W000) (W000) (W000) | 1,000 |
|
| WDMB | IA | Self-Tapping Thread Rolling Screw | Steel | Plain | 5/16-18 x 2 | scr trs hwh bxca zf/sil 5/16-18x2 spc (W000) (W000) (W000) | 4,024 |
|
| Komar | IL | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 2 | groove pin type-c 18-8 ss | 86 |
|
| NutsBolts | NE | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 | 1/4-20x2 indented hwh thread rolling screw screw ss | 40600 |
|
| Delta | TX | Self-Tapping Thread Rolling Screw | Steel | Plain | #17 8 x 2 | phillips modified truss #17 pt pln 8 x 2 (OR RH WITH WASHER; WITH AUGER BIT) | 4000 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | #6-32 x 2 | 6-32x2 torx pan head thread rolling steel zinc w/magni 560 | 4912 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | #8-32 x 2 | 8-32x2 torx pan head thread rolling steel zinc w/magni 560 | 2895 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Black | #8-32 x 2 | 8-32x2 torx pan head thread rolling screw steel zinc blk nickel | 19254 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20x2 unslotted hex washer thread rolling steel zinc | 1500 |
|
| B & K FAST | PA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18 x 2 hwh thread rolling screw thread form screws zinc b18.6.4 | 495 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #10-14 x 2 | 10-14x2 phillips pan thread rolling screw for plastic 48-2 fully threaded 18-8 ss passivated and wax | 31.250 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-15 x 2 | 1/4-15x2 phillips pan high low screw fully threaded zinc and bake | 25,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-15 x 2 | 1/4-15x2 unslotted indented hex washer high low screw fully threaded zinc | 25,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20x2 unslot ind hex wash serrated thread rolling screw screw full thread zinc bake wax | 25,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18x2 unslot ind hex wash serrated thread rolling screw screw full thread zinc bake wax | 12.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-14 x 2 | 10-14x2 phillips flat thread rolling screw for plastic 48-2 fully threaded zinc bake and wax | 62.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-16 x 2 | 8-16x2 phillips pan thread rolling screw for plastic 48-2 fully threaded zinc bake and wax | 62.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-14 x 2 | 10-14x2 phillips pan thread rolling screw for plastic 48-2 fully threaded zinc bake and wax | 62.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-10 x 2 | 1/4-10x2 phillips pan thread rolling screw for plastic 48-2 fully threaded zinc bake and wax | 25,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-10 x 2 | 1/4-10x2 slotted ind hex washer thread rolling screw for plastic 48-2 fully threaded zinc bake & wax | 25,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20x2 phillips flat thread rolling scrw fully thrd zinc bake & wax | 31.250 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6-32 x 2 | 6-32x2 phillips pan thread rolling screw fully thrd zinc bake & wax | 125,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 2 | 8-32x2 phillips pan thread rolling screw fully thrd zinc bake & wax | 75,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6-19 x 2 | 6-19x2 phillips pan thread rolling screw for plastic 48-2 fully threaded zinc bake and wax | 75,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-24 x 2 | 10-24x2 phillips pan thread rolling screw fully thrd zinc bake & wax | 75,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20x2 slot ind hex wash thread roll screw fully thrd zinc bake wax | 25,000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18x2 slot ind hex wash thread roll screw fully thrd zinc bake wax | 12.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | 3/8-16x2 slot ind hex wash thread roll screw fully thrd zinc bake wax | 12.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/2-13 x 2 | 1/2-13x2 slot ind hex wash thread roll screw fully thrd zinc bake wax | 7.500 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-32 x 2 | 10-32x2 phillips pan thread rolling screw fully thrd zinc bake & wax | 75,000 |
|
| ZAL INDUS | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4 x 2 | 1/4 x 2 hwh-thread rolling pltd | 2,624 |
|
| JET FITTING | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | thread forming screw pan torx 1/420x2 steel zinc plated b18.6.4 | 5400 |
|
| CNB | IL | Self-Tapping Thread Rolling Screw | Steel | Black Oxide | #8-18 x 2 | hex , indented, 1018/1022, hardened, , hi lo | 87950 |
|
| American | NY | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 2 | 3/8-16 x 2 hex washer thread rolling zinc plate | 48 |
|
| American | NY | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/2 x 2 | hex washer thread rolling plate | 300 |
|
| OBRIEN | OH | Self-Tapping Thread Rolling Screw | Steel | Plain | # x 2 | #6x2 phillips flat hi-lo | 14000 |
|
| FACCA | Ont | Self-Tapping Thread Rolling Screw | Steel | Nickel | 1/4-20 x 2 | thread rolling screw indented hex washer head 1/4-20 unc x 2 long hardened low carbon steel electroless nickel plated (use part #74990 to nickel plate) b18.6.4 | 220 |
|
| FACCA | Ont | Self-Tapping Thread Rolling Screw | Steel | Nickel | 1/4-20 x 2 | thread rolling screw indented hex washer head 1/4-20 unc x 2 long hardened low carbon steel electroless nickel plated (use part #74990 to nickel plate) b18.6.4 | 220 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
