FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Metal Drill Bits | Steel | 0.213 | #3 x 2 slot bit | 15 |
| |
| Jackson | MS | Finished Hex Nut | Grade 8 | Plain | 7/16 | nc hex nut | 40 |
|
| Jackson | MS | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 7/8 | nc flat socket c/s 18-8 304 | 200 |
|
| Jackson | MS | Set Screw (Socket Head) | Steel | Plain | 3/4 x 2 1/2 | nc socket set cup point | 34 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 1/2 | undercut fl phillips m/s 18-8 304 | 203 |
|
| Jackson | MS | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10 x 1 | #10x1 tek pan phillips 410 s/s | 11745 |
|
| OneMonroe | NC | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/32 x 1 | 1/32 x 1 cotter pin pkg plated | 400 |
|
| Jackson | MS | Slotted Spring Pin (Roll Pin) | Steel | Plain | 5/64 x 1 1/2 | roll pin 1074 carbon finish | 1368 |
|
| Jackson | MS | Finished Hex Nut | Grade 8 | Plain | 1/2-20 | national fine thread hex nut finish! | 2959 |
|
| OneMonroe | NC | Clamps (Straight Line, Vertical, Horizontal, etc.) | 4 | 4 c clamp opt3 forged raw | 720 |
| ||
| OneMonroe | NC | Lifting Hooks, Rings & Snaps (Slip Hooks, Snap Shackles, etc.) | Steel | Plain | 5-16 | clevis slip hook 5-16 | 1 |
|
| OneMonroe | NC | Lifting Hooks, Rings & Snaps (Slip Hooks, Snap Shackles, etc.) | Steel | Plain | 3/8 | 3/8 4.14 oal 5400lb carbon steel clevis grab hook | 9 |
|
| OneMonroe | NC | Machine Screw | Steel | Plain | #6-19 x 1/2 | 6-19 x 1/2 phillips pan head | 400 |
|
| Jackson | MS | Flat Head Socket Cap Screw | Steel | Plain | 7/16-14 x 1 3/4 | nc flat socket c/s | 69 |
|
| Jackson | MS | Wood Screw | Steel | Zinc/Clear | #4 x 1 1/4 | flat phillips wood | 5165 |
|
| Jackson | MS | Heavy Hex Nut | Steel | Plain | 2-4 1/2 | nc heavy hex nut | 179 |
|
| OneMonroe | NC | Taper Bolt Anchor | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | caster rigid plate wheel sz 10 x 3 dual wheel wheel mat so ft thick plyurethane on iron tapered roller bearing top plate size 5 x 7-1/4 bolthole pattern 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load height 12-1/2 load capacity 5100 lbs | 1 |
|
| OneMonroe | NC | Lifting Hooks, Rings & Snaps (Slip Hooks, Snap Shackles, etc.) | Steel | Plain | 5/8 x 6 | 5/8 x 6 wire rope sling-eye-eye | 10 |
|
| OneMonroe | NC | Threaded Rod | Class 4.6 | Plain | M6-1.0-1.00 x 1 | m6-1 x 1 meter threaded rod class 4.6 plain din 975 | 2 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 5/8-11 x 12 | oal b7 stud | 50 |
|
| OneMonroe | NC | Pipes | Steel | Zinc/Clear | 5 | 5 nom. pipe size zinc plated iron pipe swivel rings | 30 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #4-40 x 1 | 4-40 x 1 slottedround m/s pkg plated | 300 |
|
| Jackson | MS | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75 | jam nut a-2 18-8 304 | 88 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/16 | 4-40 x 3/16 phillips pan m/s stainless pkg | 200 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/8 | 4-40 x 3/8 ph pan m/s patch 18-8ss | 520 |
|
| OneMonroe | NC | Machine Screw | Nylon (Polyamide) | Plain | #4-40 x 5/8 | 4-40 x 5/8 slotted pan hd m/s nyl nat | 2020 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 7/16 x 1 15/16 | swivel caster 7/16 x 1-15/16 friction ring stem 5 x 1-1/4 wheel size wheel material poly loc 220 lbs capacity. | 16 |
| ||
| Jackson | MS | Hex Jam Nut | Steel | Zinc/Clear | 5/8-18 | nf jam slotted nut | 28 |
|
| Jackson | MS | Heavy Hex Jam Nut | Nylon (Polyamide) | Zinc/Clear | 3/4 | 3/4-10 nc zinc nylon heavy thinjam nut ntu, domestic green insert greer smyrna domestic | 183 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2 1/2 | nc hex tapp bolt 18-8 ss f/t | 306 |
|
| Jackson | MS | Machine Screw | Nylon (Polyamide) | Plain | 1/4-20 x 1 1/2 | flat slotted m/s | 2518 |
|
| Jackson | MS | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 5/16 | external tooth l/w | 275 |
|
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/4 | hex key long arm | 10 |
|
| Jackson | MS | Socket Head Cap Screw | Class 12.9 | Plain | M30-3.50 x 80 | socket hd c/s | 33 |
|
| Jackson | MS | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | M8-1.25 | M8x1.25 coarse serrated whiz flange locknut | 1376 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain | 1/4-28 x 3/8 | nf socket hd cap | 2686 |
|
| OneMonroe | NC | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 3 | screw 1/2x3 hex lag screw 18 8 stainless steel 50/ctn | 57 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Plain | 1/2-13 x 1 3/4 | 1/2-13 x 1 3/4 soc c/s ptch efi stl | 125 |
|
| OneMonroe | NC | Set Screw (Socket Head) | Steel | Plain | 1/2-13 x 1 3/4 | 1/2-13 x 1 3/4 soc set-cup pt | 100 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 20 | 1/2-13 x 20 full threaded stud s.s. | 1 |
|
| Jackson | MS | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Plain | 1/4 | round pv250015 push nut | 4210 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/4 | nc heavy insert nu series | 923 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 1/2-13 x 2 1/2 | b7 stud and | 148 |
|
| Jackson | MS | Flat Head Socket Cap Screw | Steel | Plain | 1/4-20 x 2 | nc flat socket c/s | 483 |
|
| Jackson | MS | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 5/8 | nc skt set cup point 18-8 304 | 196 |
|
| Jackson | MS | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 5 | hex lag ss | 13 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Grade 8 | Plain | 1 1/4-7 | nc nylon insert l/n | 1 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain | 7/16-14 x 3 1/4 | nc socket hd cap | 143 |
|
| Century | FL | Latches & Catches | latch trunk lock latch trunk lock | 86 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Plain | M130.0 x 2.6 | o-ring 130.0mm id x 2.6mm c/s vmq a70 not color specified l3 technologies l3 technologies | 85 |
| |
| Century | FL | Springs (Torsion) | teradyne 480-361-00 torsion spring-per print- | 86 |
| |||
| Century | FL | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Steel | Zinc/Clear | pem kf2-m3hc broaching nut stl ckf2m3zi-trivalent zinc clear kf2-m3hc | 86 |
| |
| Century | FL | raf 1124-6-al length .140 id aluminum | 86 |
| ||||
| Century | FL | Coupling Nut | Plain | 5/8-11 x 13/16 x 1 | 5/8-11 x 1 +-1/16 hex coupling nut 1 +-1/16 long per print | 86 |
| |
| Century | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 4 | 1/4-20 x 4 hex hd cap screw 18-8 | 85 |
|
| Century | FL | Hex Head Cap Screw | Grade 5 | Plain | 7/8-9 x 1 | 7/8-9 x 1 hex hd capscrew gr-5 plain 7/8-9 x 1 hex hd capscrew gr-5 plain | 85 |
|
| Century | FL | Machine Screw | Plain | #8-32 x 27/32 | ms27039-0813 | 53 |
| |
| Century | FL | Machine Screw | Cadmium/Yellow | #10-32 x 1 3/4 | ms35207-270 | 830 |
| |
| Century | FL | Double End Stud | Grade 5 | Zinc/Yellow | 5/16-24 x 9 1/8 | 5/16-24 x 9 1/8 double end stud gr 5 q2b zinc yellow (see print) rev d parker parker | 85 |
|
| Century | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3/8 | 5/16-18 x 3/8 button soc cap 40 per 18-8packed 40 pcs per with label 115130-40 | 85 |
|
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | .625/.627 x 1.000 x .073/.075 | 12-556-47 fw round to .005 tir pass. rev-e .625/.627 x 1.000 x .073/.075 300 ss parker 12-556-47 | 85 |
|
| Century | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 12.0 | m6 x 12.0mm hex hd 316 stst (a4) din 933 | 85 |
|
| Century | FL | Hex Head Cap Screw | Class 10.9 | Plain | M16 x 50.0 | m16 x 50.0mm grd 10.9 hex cap screw full thread din 933 | 85 |
|
| Century | FL | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 x 30 | m10 x 30 hex flange bolt a2 stainless steel din 6921 | 85 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 20 | m3 x 20mm torx t10 pan pt alt s/s | 85 |
|
| Century | FL | Machine Screw | Plain | ms24694c100 | 85 |
| ||
| Century | FL | Flat Washer | Plain | #2 | ms51859-1 | 485 |
| |
| Century | FL | Machine Screw | Steel | Plain | ms35214-21 screw mach pnh | 85 |
| |
| Global | CA | bu-2741-d-48-2 mueller test prod to plug red 48 in | 4 |
| ||||
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 20 | m5-.8 x 20 flat 90 countersink head | hex socket cap screw / iso 10642 a2 stainless steel packed 100 per bag | hex socket cap screw / iso 10642 a2 stainless steel packed 100 per bag | hex socket cap screw / iso 10642 a2 stainless steel packed 100 per bag din 7991 | 69 |
| |
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 25 | m5-.8 x 25 flat 90 countersink head hex | socket cap screw / iso 10642 a2 stainless steel | socket cap screw / iso 10642 a2 stainless steel | socket cap screw / iso 10642 a2 stainless steel din 7991 | 7500 |
| |
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 30 | m5-.8 x 30 flat 90 countersink head hex | socket cap screw / iso 10642 a2 stainless steel | socket cap screw / iso 10642 a2 stainless steel | socket cap screw / iso 10642 a2 stainless steel din 7991 | 17500 |
| |
| NAPPCO | TX | Protective Caps & Plugs | Plastic | end cap assembly 2620 #125615 | 2 |
| ||
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Black Oxide | 61-0849-0161 maxi rs gypsy stud/govt black scovill dot fasteners | 39000 |
| |
| IndexFast | CA | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | ak 142000 ebg acorn type lock nut 1/4-20/electroplate | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | .453 | type-u speed nut range .020-.051 cte .453 | inquire |
|
| IndexFast | CA | Protective Caps & Plugs | Steel | Zinc/Clear | 11/32 | hs 51400 k2915 tube closure 1 1/2 steel/zinc 12-18 gauge | inquire |
|
| IndexFast | CA | Protective Caps & Plugs | Steel | Nickel Plated | 1 | ss 51051 k1110 plug button steel/nickel .083-.125 | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Phosphate | .155 | c12043-012-4 push on type speed nut round black phosphate & oil | inquire |
|
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Black Oxide | M83-0000-359 | M83-0000-359 sk 50 brass/governmet black long post .310 | 10050 |
|
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 95-ss-21154-3i segma/brown enamel cap 16 ln obsolete fabric snap | inquire |
| ||
| IndexFast | CA | Snap Bushings, Strain Relief Bushings | Steel | Black Oxide | 22 | mp 06258 .625 snap bushing nylon black sb625-b | inquire |
|
| IndexFast | CA | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 104 | thb06c0250ss 6-32 x 1/4 t/r hex-pin button head stainless steel | inquire |
|
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Nickel Plated | 93 | 93-xx-10322-3a durable/long gypsy stud dot fasteners | inquire |
|
| IndexFast | CA | db-8 | inquire |
| ||||
| IndexFast | CA | Service & Repair Kits | k235-00 | #00 g&w setting kit | inquire |
| ||
| IndexFast | CA | External Type SH Retaining Ring | Steel | Plain | dsh-19stpa m19 external retaining ring steel/black phosphate | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | #10-24 | c1379-1024-4 type-u speed nut 10-24 range .025-.064 cte .500 black phosphate & oil | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | sk 040015 pg | inquire |
| |
| IndexFast | CA | Protective Caps & Plugs | Plastic | bs 50707 fkk 9800 | inquire |
| ||
| IndexFast | CA | Hex Spacer | Aluminum | Plain | 1/4 x 1/2 | a-2008-6-c 1/4 rnd x 1/2 x #6 spacer aluminum/clear hexavalent chromate mil-c-5541f aa6341- | inquire |
|
| IndexFast | CA | Grommets & Eyelets | Brass | #5 | grommet & tooth washer brass | inquire |
| |
| IndexFast | CA | Battery Packs | 2 | sf2-cb 123a lithium battery 2 pack | inquire |
| ||
| Brikksen | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 hex head cap screw asme b18.2.1 316 stainless steel | b18.2.1 316 stainless steel | b18.2.1 316 stainless steel | 40 |
| |
| Brikksen | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 hex head cap screw asme b18.2.1 316 stainless steel | b18.2.1 316 stainless steel | b18.2.1 316 stainless steel | 5 |
| |
| Brikksen | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 3/4 | 3/8-16 x 1-3/4 hex head cap screw asme b18.2.1 316 stainless steel | b18.2.1 316 stainless steel | b18.2.1 316 stainless steel | 750 |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | #6-32 | type-u speed nut range .110-.130 cte .250 | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | x or | type-u speed nut range .045-.062 cte .203 2300-04/43163 | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | #8-32 | regular type lock nut | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | #10-24 | type-u speed nut range .025-093 cte .312 | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | 1/4-20 | flat type speed nut .750 x .500 mt .025 | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 1/4 | 138662002 flat round type pushnut fastener steel/mechanical zinc pv 250015-598 | inquire |
|
| IndexFast | CA | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | 5/16-18 | speed grip nut retainer range .093-.126 dcs-1288-ztc | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | #8-32 | type-u speed nut range .025-.040 cte .515 202-108 2070-04 | inquire |
|
| IndexFast | CA | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | 3/8-16 | d7957-3816-3b speed grip nut retainer range .093-.126 zinc electroplate | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Phosphate | 5/16 | flat round type pushnut fastener 138599000 | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Phosphate | 3/16 | push on type speed nut rectangular dcs-350-po | inquire |
|
| IndexFast | CA | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | 1/2-13 | speed grip nut retainer range .093-.126 dcs-893-ztc | inquire |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
