1/4-28 Ball Bearings
A ball bearing is a type of rolling-element bearing that uses spherical balls to maintain separation between two concentric rings, called races, allowing for smooth relative motion between machine parts while minimizing friction. The primary function of a ball bearing is to reduce rotational friction and support both radial (perpendicular to the shaft) and axial (along the shaft) loads. It achieves this by using at least two races to contain the balls and transmit the loads through them: typically, one race is fixed while the other rotates with the shaft or hub
10 results, (click on any line for more information)
Buy Ball Bearings from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
Optimas | IL | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 1/4-28 x 45 | 1/4-28 45 steel zinc grease fitting with ball check | 38 |
|
SII | IN | Ball Bearings, Balls, Bearing Mounts | 1/4-28 | 1/4-28 straight taper thread w/ ball check | 30 |
| ||
SII | IN | Ball Bearings, Balls, Bearing Mounts | 1/4-28 | 1/4-28 45deg taper thread w/ ball check) | 75 |
| ||
SII | IN | Ball Bearings, Balls, Bearing Mounts | 1/4-28 | 1/4-28 90deg taper thread w/ ball check) | 25 |
| ||
Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 1/4-28 | 1/4-28 sae-lt 65 degree taper thread grease fitting individual zinc clear trivalent sae j535 surface ball check 3010b or equal | 100 |
|
Valley Nu | WA | Ball Bearings, Balls, Bearing Mounts | 1/4-28 | nf throttle ball joint | 2 |
| ||
IPC | VA | Ball Bearings, Balls, Bearing Mounts | 1/4-28 | 1/4-28 straight grease fitting (sae)sae-lt less ball and spring | 350 |
| ||
NutsBolts | NE | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 | 1/4-28 swivel ball joint ss | 4387 |
|
Hodell | OH | Ball Bearings, Balls, Bearing Mounts | Nylon (Polyamide) | Plain | 1/4-28 | 1/4-28 (lh) ball rod end nylon | 48 |
|
SWACO | OH | Ball Bearings, Balls, Bearing Mounts | 1/4-28 | 1/4-28 ball joint spec thread length |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.