FCH Member Advertisement
FCH News
Sleeve Anchors , Class 9.8
Sleeve Anchors are one of the most versatile masonry expansion anchors, and can be used in a variety of base materials, including concrete, brick, and block. As the nut on the top of the anchor is tightened, it pulls the cone-shaped stud end into the expander sleeve, locking the anchor into the base material.
6 results, (click on any line for more information)
| Buy Sleeve Anchors from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| CIF | IL | Sleeve Anchor | Class 9.8 | Zinc/Black | M8 x 1.25 x 103 | m8 x 1.25 x 103 hex flange shoulder bolt with crimped sleeve 9.8 zinc black per drawing | 2189 |
|
| CIF | IL | Sleeve Anchor | Class 9.8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M6-1.00 x 71.5 | m6 x 1.0 x 71.5 compression limiter flange bolt with sleeve class 9.8 dacromet plated | 10050 |
|
| CIF | IL | Sleeve Anchor | Class 9.8 | Zinc/Clear | M6-1.00 x 32.5 | m6 x 1.0 x 32.5 hex flange bolt sem with 17 mm long sleeve 9.8 zinc plated (newstream) | 11804 |
|
| CIF | IL | Sleeve Anchor | Class 9.8 | Plain | M8 x 1.25 x 103.000 | m8 x 1.25 x 103.000 hex flange shoulder bolt with crimped sleeve class 9.8 plain finish | 300 |
|
| CIF | IL | Sleeve Anchor | Class 9.8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M6-1.00 x 71.5 | m6 x 1.0 x 71.5 compression limiter flange bolt with sleeve class 9.8 dacromet plated with 3m2353 blue sealant | 95 |
|
| CIF | IL | Sleeve Anchor | Class 9.8 | Zinc/Black | M6-1.00 x 40 | m6 x 1.0 x 40 hex flange bolt with sleeve and grommet assembled bolt is 9.8 sleeve is 1050 38/43 rc zinc 8f with black grommet assembled | 21924 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
