FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Hex Head Cap Screw | Class 8.8 | Plain | M8-1.25 x 50 | (10) m8x1.25x 50 hex cap 8.8 | inquire |
| |
| OneMonroe | NC | 3/8 square drive adaptor 1/4 shank | 2 |
| ||||
| OneMonroe | NC | type-a chuck key leash k0 k1 k7 kg | 7 |
| ||||
| OneMonroe | NC | 3/32 aluminum stop button | 71 |
| ||||
| OneMonroe | NC | 5 bifold hardware set-125 lb. | 2 |
| ||||
| OneMonroe | NC | din rail sym metrical 35mm x 7.2mm x 2.563 in galvanized steel | 64 |
| ||||
| OneMonroe | NC | stickersamerican prideb&p | 16 |
| ||||
| OneMonroe | NC | 1.50 od x .890 id x 3/32 thick s/s | 100 |
| ||||
| OneMonroe | NC | padding fuel tank | 1 |
| ||||
| OneMonroe | NC | 3 louver | 11 |
| ||||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 80 | o-ring epdm 80 durometer | 18 |
|
| OneMonroe | NC | Grease Fittings | Plain | 1/4-28 | 1/4in-28 st. grease fitting | 278 |
| |
| OneMonroe | NC | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16 | 5/16 in 2 part ss hose clamp | 4 |
| |
| OneMonroe | NC | Grease Fittings | Plain | 1/4-28 | 1/4in-28 45 degree grease fitting | 279 |
| |
| OneMonroe | NC | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | M8-1.25-1.25 x 20 | 8 x 1.25 x 20 hcs 8.8 yellow zinc | 106 |
|
| OneMonroe | NC | Plastic Push-In Rivets (Plasti-Rivet etc.) | auvecopak toyota & lexus hood ins. retainer | 1 |
| |||
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | auvecopak auvecopak gm moulding clip | 1 |
| |
| OneMonroe | NC | Blind Rivet | Aluminum | Plain | 3/16 | auvecopak aluminum/steel rivet 3/16 dia auap20834 | 1 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M6-1.00-1.00 x 16 | m6 x 1.00 x 16 sem body bolt | 300 |
|
| OneMonroe | NC | License Plate Hardware | auvecopak license plate screw | 2 |
| |||
| OneMonroe | NC | Solid Rivet | Nylon (Polyamide) | Plain | 1/4 | auvecopak nylon rivet 1/4 dia. | 1 |
|
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 slot fill sst rohs () () | 2092 |
|
| Olander | CA | Flat Washer | Steel | Plain | southco wear wash | 69 |
| |
| Olander | CA | External Push-On Shaft Retainer | Steel | Plain | .125 reinforced pushon ret ring stl .010 | 958 |
| |
| Olander | CA | Machine Screw | Steel | Zinc/Clear | 6-32 x 7/16 slot flat stl zn non-rohs | () | 2030 |
| |
| Olander | CA | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/4 | 4-40 x 3/4 phillips pan fw/lw sems ss () () | 43 |
|
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | associated compression spring ss | 72 |
| ||
| Olander | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #8 x 3/4 | 8 x 3/4 hwh self-drill stl zn cr3 () () | 5176 |
|
| Olander | CA | Flat Washer | Steel | Black Oxide | 4 | 4 sp f/w stl blk .209 .115 .032 () | 2870 |
|
| Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6-32 x 5/16 soc set 1/2 dog pt sst rohs | 336 |
| |
| GLF | OH | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6-32 x 3/8 | #6-32 x 3/8 fhcs 18-8 s/s blk ox | 462 |
|
| GLF | OH | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Grade B7 | Zinc/Yellow | 3/4-10 x 4 1/2 | 3/4-10 x 4-1/2 hvy hex hd bolt b-7 stl zy | 12 |
|
| GLF | OH | Hex Head Cap Screw | Grade 5 | Plain | 1/2-13 x 1 3/8 | 1/2-13 x 1-3/8 hhcs gr 5 stl pln | 351 |
|
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Plain | M24-3.00 x 170 | m24-3 x 170 hhcs cl 8.8 stl pln din 931 | 12 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | ASTM A574 | Plain | 5/8-11 x 1/2 | 5/8-11 x 1/2 socket set flat point alloy | 470 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #10-32 x 5/8 | 10-32 x 5/8 phil flat m/s zinc | 1947 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #4-40 x 1/2 | 4-40 x 1/2 phil flat m/s zinc | 14125 |
|
| Hayes | CA | Machine Screw | Steel | Plain | #10-32 x 3/8 | 10-32 x 3/8 phil flat m/s bk/ox | 4135 |
|
| R&S Indus | OR | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 1/2-13 x 2 1/2 | 1/2-13x2 1/2 (pt) a325 type-1 heavy hex structural bolt coarse plain (usa) | 14 |
| |
| R&S Indus | OR | Button Head Socket Cap Screw | Steel | Plain | 1/2-13 x 2 1/2 | 1/2-13x2 1/2 (ft) button socket caps coarse alloy thermal black oxide 701201/50 | 9 |
|
| R&S Indus | OR | 12 Point Flange Screw (CounterBore) | Steel | Plain | 1/2-13 x 2 1/2 | 1/2-13 x 2-1/2 12 pt flange screw alloy steel | 109 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | 3/8-16 x 2 | 3/8-16 x 2 phil pan m/s zinc | 358 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #6-32 x 7/8 | 6-32 x 7/8 p-flat 100 deg. m/s zinc | 2100 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 phil pan m/s zinc | 378 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #10-32 x 1 3/8 | 10-32 x 1 3/8 phil pan m/s zinc | 1460 |
|
| Hayes | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Brass | Cadmium | 1/4-28 | 1/4-28 full/lite flex style l/n brass cad i | 489 |
|
| Hayes | CA | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 2 3/4 | 7/16-14 x 2 3/4 hex c/s domestic gr 8 pln | 46 |
|
| Hayes | CA | Socket Head Cap Screw | 316, 317, A4 Stainless | Passivated | 5/16-18 x 1 1/2 | 5/16-18 x 1 1/2 soc cap screw 316ss pass | 102 |
|
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1 | 5/16-18 x 1 phil pan m/s 18-8ss | 153 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain | 7/8-9 x 2 1/4 | 7/8-9 x 2-1/4 hex head cap screw asme | 145 |
|
| Hayes | CA | Swage Sleeves, Crimp Sleeves | Steel | Plain | te d-110-0101 4.32mm x 36.80 solder sleeve | 95 |
| |
| Bossard | AZ | thru thread insert straight penn engineering | 1858 |
| ||||
| Bossard | AZ | Button Head Socket Cap Screw | Steel | Plain | screw button hd cap bn1593 | 364 |
| |
| Bossard | AZ | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | floating nut stainless penn engineering | 50736 |
| |
| Bossard | AZ | Key Locking Insert (Keensert, Keysert etc.) | #8-32 x 1 | insert 8-32x1 dia non locking | 755 |
| ||
| Centennia | CO | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Steel | Zinc/Clear | 1/4-20 x 3/8 | 1/4-20 x 3/8 whizloc scr.ew zinc | 7778 |
|
| Kanebridge | IL | Wood Screw | Steel | Zinc/Clear | #10-9 x 1/2 | #10-9x1/2 phillips pan deep thread type-17 full thread zinc and bake wood screws | 70000 |
|
| CIF | IL | Hitch Pin | Steel | Zinc/Clear | 3/8 x 2 | 3/8 x 2 locking pin with 1 3/4 useable length with wire and cable steel zinc plated | 44 |
|
| CIF | IL | Carriage Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 2 1/4 | 1/2-13 x 2 1/4 carriage bolt grade 5 zinc plated | 23 |
|
| CIF | IL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 35 | m12 x 1.75 x 35 hex cap screw grade 8.8 zinc plated din 933 | 300 |
|
| CIF | IL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 5/8 | 3/8-16 x 5/8 button head socket cap screw 18-8 ss | 273 |
|
| CIF | IL | Collar Stud | Class 10.9 | Zinc/Clear | M10-1.50 x 75 | m10 x 1.5 x 75 collar stud 10.9 plated per jdm f15 a2c (zinc trivalent clear 5 mic min) rohs compliant | 25600 |
|
| Optimas | IL | Flat Washer | Steel | Plain | .720 x 1.030 x .125 | .720 x 1.030 x .125 flat washer steel per drawing (p) | 24222 |
|
| Optimas | IL | Round Spacer | Steel | Zinc/Clear | M14 x 21.4 x 16 | 14mm x 21.4mm x 16mm round spacer 1045f cd steel zinc triv per dwg rohs (p) | 717 |
|
| Hodell | OH | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 7 1/2 | 3/4-10x7 1/2 hex c/s 316 stainless | 50 |
|
| SWACO | OH | Set Screw (Socket Head) | Steel | Zinc/Clear | 1/4-20 x 5/8 | 1/4-20x5/8 sock set sc cup stl zn-b | 200 |
|
| SWACO | OH | Hex Machine Bolt | Grade A | Zinc/Clear | 7/8-9 x 2 1/2 | 7/8-9x2 1/2 hex bolt a307 gr a zn | 39 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 et c.) | Plain | 2tnf-00c-0060 kato ss tangless insert | 3455 |
| |
| SWACO | OH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | M14 | m14 hx keys stl 6150 s. arm | 21 |
| |
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M27-3.00 x 50 | m27-3.00x50 hhcs cl8.8 zp ft din 933/iso4017iso4017 | 10 |
|
| SWACO | OH | Thread Repair Kit | Plain | 5905-6 heli-coil tap | 2 |
| ||
| SWACO | OH | Solid Rivet | Steel | Plain | 2117-T4 | solid rivet nas1097ad3-3 | 123948 |
|
| SWACO | OH | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 3 | 1/4-20x3 thread cutting sc f zn | 300 |
|
| SWACO | OH | Socket Head Cap Screw | Steel | Plain | hook-support nas622ce2 nas622ce2 | 95 |
| |
| SWACO | OH | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1/2-13 x 2 1/2 | 1/2-13x2-1/2 b7 stud pln | 73 |
|
| SWACO | OH | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1/2 | 1/4x1/2 dowel pin 18-8ss | 211 |
|
| Accutite | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Black Oxide | #14 x 1 | 14 x 1 phillips pan sms black oxide type-a | 9350 |
| |
| AIH | AZ | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 9 | 3/8-16x9 rod threaded ss | 76 |
|
| AIH | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5 x 8 | m2.5 x 8 screw cheesehead slotted a2-70 | 206 |
|
| AIH | AZ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 3/8 | 3/8-24 x 3/8 soc set-cup pt s/s | 823 |
|
| Field Fas | IL | stanley deep pro organizer per dwg# 420 | 790 |
| ||||
| Field Fas | IL | Flat Washer | Steel | Zinc/Clear | 1.6 | 4mm x 12mm flat washer 1.6 thk rohs | 2000 |
|
| Field Fas | IL | Solid Rivet | Steel | Plain | 3/4 x 2 1/2 | 3/4 x 2 1/2 button solid rivet stl pln | 127 |
|
| Field Fas | IL | Sockets | 12 | 12 volt plug & socket outlet auxiliary lighter | 59 |
| ||
| Field Fas | IL | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M14 | m14 external tooth l/w 18-8 ss | 480 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-24 x 3 | 5/16-24 x 3 gr.5 hx hd c/s-zp | 2.96 |
|
| OneMonroe | MN | Hex Head Cap Screw | Teflon (PTFE) | Plain | 9.913 x 1/8 | seal radial 9.913 id x .125 c/s ptfe cover w/sst spring | 5 |
|
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M12-1.75 x 20 | m12 x 1.75 x 20 cl 12.9 skt hd c/s-zp | 500 |
|
| OneMonroe | MN | Wood Screw | Brass | Plain | #10 x 1 1/4 | #10 x 1 1/4 phillips flat w/s brass | 200 |
|
| OneMonroe | MN | Set Screw (Socket Head) | Steel | Black Oxide | 5/16-18 x 3/4 | 5/16-18x3/4 hex skt set screw w/cup point steel black oxide | 4000 |
|
| OneMonroe | MN | Hex Head Cap Screw | Steel | Plain | 1/2-13 x 1 1/2 | 1/2-13 x 1 1/2 steel plain hex cap screw | 91 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 3/8 | 1/8 x 3/8 ball bearing ss abec 5 | 690 |
|
| MWRAF | CT | Coiled Pin (Spiral Spring Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 | raf electronics part m1350-5008-ss 8mm hex x 3mm x m5 thread | 2475 |
|
| OneMonroe | MN | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/32 x 24 | prec grind shafting 5/32 x 24in t-303ss | 2 |
|
| OneMonroe | MN | Electrical Lugs & Terminals | 16-14 | 16-14 ga. x 3/8 stud (ring terminal) hi-temp pkg | 150 |
| ||
| OneMonroe | MN | Machine Taps | Steel | 1 | size 1 10-24 tap | 27 |
| |
| OneMonroe | MN | Pipe Coupling, Pipe Connector | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/4 | 3/4 npt half coupling stainless steel | 18 |
| |
| OneMonroe | MN | Wood Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #12-24 x 5/8 | 12-24x5/8 phillips flat hd ms 18-8 ss passivated w/stat bronze painted hds per color chip | 2000 |
|
| OneMonroe | MN | Round Female/Female Standoff | Plain | 1/4 | 1/4 round f-f standoff | 400 |
| |
| OneMonroe | MN | Gaskets | 1 x .75 x .125 | 1 od x .75 id x .125 v70 gasket | 100 |
| ||
| OneMonroe | MN | Safety Glasses & Eye Protection | smoke mirror safety glasses black frame | 5 |
| |||
| OneMonroe | MN | Metal Drill Bits | Steel | 0.228 | #1 hss blitz bit jobber length drill | 9 |
| |
| OneMonroe | MN | Lock Bolt with Collar (HuckBolt etc.) | Plain | mg hucktainer (pin lock) | 246 |
| ||
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2 1/2 x 3 5/8 | lh 3-3/16 oah 5-3/16 top plate size 2-1/2 x3-5/8 bolthole pattern 1-3/4 x2-13/16 slotted to3-1/16 stainless steel | 32 |
|
| OneMonroe | MN | Machine Dies | Steel | 90 | 90 degree air angle die grinder | 1 |
| |
| OneMonroe | MN | Round Spacer | Plain | ford & chrysler door frame spacer retainer (50/per) | 1 |
| ||
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | o-ring vulcanized spliced 800 mm id x 5 mm cs 70a buna | 21 |
| |
| Alma Bolt | MI | Solid Rivet | Steel | Plain | 1/4 x 1/2 | 1/4 x 1/2 universal head solid steel rivet | 788 |
|
| Alma Bolt | MI | Cable Clamps & Ties | Nylon (Polyamide) | 3/8 | 3/8 bundle x 3/8 wide nylon cable clamp natural | 2015 |
| |
| Alma Bolt | MI | Self-Tapping Thread Rolling Screw | Plain | #10 x 2 | #10 x 2 (#8 hd 1/4) hex washer pierce pt screw (needle) | 3910 |
| |
| Alma Bolt | MI | Hitch Pin | Plain | 3/8 x 3 1/2 | 3/8 x 3 1/2 (3 1/8 effective) cotterless hitch pin | 128 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 2 | Plain | 1 1/4-7 x 4 1/2 | 1 1/4-7 x 4 1/2 hex hd mach bolt g2 | 148 |
|
| Alma Bolt | MI | T-Slot Nut | Plain | 3/8-16 | 3/8-16 #149 t-slot nut | 25 |
| |
| Alma Bolt | MI | Socket Head Cap Screw | null | Plain | #8-32 x 1 1/2 | #8-32 x 1 1/2 full thread alloy socket hd cap screw | 100 |
|
| Alma Bolt | MI | Bonded EPDM Sealing Washer | Plain | 7/8 | 7/8 bolt size (1 1/2 od) bonded sealing washer | 374 |
| |
| Alma Bolt | MI | Slotted Spring Pin (Roll Pin) | Plain | 5/64 x 1/2 | 5/64 x 1/2 spring roll pin | 3946 |
| |
| FSP | IL | Hex Tap Bolt (Fully Threaded) | Grade 8 | Black Oxide | 5/8-11 x 2 3/4 | hex tap bolt 5/8-11 x 2-3/4 grd 8 stl blk ox | 4075 |
|
| Optimas | IL | Socket Head Cap Screw | Class 12.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M5-0.80 x 75 | m5x0.8 x 75mm socket head cap screw class 12.9 geomet 500a rohs (i) din 912 | 100 |
|
| Optimas | IL | Flat Washer | Steel | Plain | 1.355 x 1.750 x .125 | 1.355 x 1.750 x .125 flat washer steel per drawing (p) | 59 |
|
| Empower H | IL | Eye Bolt | Steel | Galvanized | eb516x412hdgregular nut eyebolthank diameter 5/16 length 4-1/2 drop forged steelhot dipped galvanizedworking load limit (lbs) 800 | 420 |
| |
| Empower H | IL | Shackles (Anchor, Snap, etc.) | Steel | Galvanized | 193lr78anchor shackleshot dipped galvanizedscrew pin typeload rated to meet federal spec rr-c-271a type iv class ipin diameter-1 shackle size-7/8 working load limit (tons)-6-1/2 | 3 |
| |
| Delta | TX | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1/2 | slotted pan sms a 18-8 sst | 1182 |
|
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Black Oxide | snap fasteners (snap studs snap caps etc.) brass black oxide d91-0000-359 sw 60/govt black socket ykk dot fasteners | inquire |
| |
| AFT Faste | TX | Button Head Socket Cap Screw | Class 12.9 | Zinc/Black | M8-1.25 x 25 | M8-1.25x25 socket head button cap screw 12.9 black zinc din 7380 | 590 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | hex machine bolt class 8.8 zinc/yellow | 28 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 5 | Plain | hex head cap screw grade 5 plain | 97 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | hex head cap screw class 8.8 zinc/clear | 1159 |
| |
| Coburn Myers Fastening Systems | PA | Lag Screw | Steel | Zinc/Clear | lag screw carbon steel zinc/clear | 1536 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 10.9 | Plain | hex head cap screw class 10.9 plain | 16 |
| |
| AMFAST | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Plain | #12-14 x 2 | 12-14x2 hwh dr flx #3stl | 10005 |
|
| Hewes | NY | Set Screw (Socket Head) | Steel | Zinc/Black | M5-0.80 x 30 | M5 x0.8 x30 socset screw cup pt _x000d_zincblack chromate | 730 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 socket cap 416 stainless-soft | 4 |
|
| FasSpcMfg | FL | Set Screw (Square Head) | Silicon Bronze | Plain | 1/4 | 1/4-blank x 3-1/2 square head set blank point silicon bronze | 109 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | #2-56 x 1 | 2-56 x 1 socket cap full thread alloy | 773 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/8-18 x 1 | 5/8-18 x 1 hex cap 316 stainless | 21 |
|
| FasSpcMfg | FL | Socket H ead Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 6 3/4 | 10-24 x 6-3/4 socket cap 18-8 stainless | 3 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Silicon Bronze | Plain | #10-32 x 5/8 | 10-32 x 5/8 socket cap full thread silicon bronze | 4 |
|
| OneMonroe | MA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 3/8 | 1/4-28 x 3/8 soc set-cup pt stainless | 2297 |
|
| OneMonroe | MA | Wood Screw | Brass | Plain | #5 x 5/8 | #5 x 5/8 phillips flat w/s brass | 400 |
|
| Raw Produ | NJ | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 5/32 x 1 1/2 | cotter pins extended prong square cut zinc cr+3 5/32 x1 1/2 | 719 |
|
| Raw Produ | NJ | Beveled Washer (Round & Square) | Steel | Galvanized | 3/4 | beveled square washers hdg 3/4 (1.75in) | 47 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6-32 x 3/8 | phillips flat head ms 100 degree taper black oxide 304 ss #6-32 x 3/8 | 1463 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2-0.40 x 10 | metric socket cap screws a2 ss m2 x .4 x 10m ft | 7890 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 2 | phillips pan head sms zinc #10 x 2 | 15882 |
|
| Raw Produ | NJ | Metal Drill Bits | Steel | Zinc/Clear | #10 x 3 | pro-z zp cap mini-driller point-forest green-#10 x 3 | 1000 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 1/2-6 x 6 1/2 | hex cap screws grade 5 zinc 1-1/2-6 x 6-1/2 pt | 500 |
|
| AEROSPCE | MN | calmark extractor | 178 |
| ||||
| AEROSPCE | MN | Self-Clinching Stud | Steel | Plain | fh4-032-24-07 pem stud | 3010 |
| |
| AEROSPCE | MN | Quick Access Panel Fasteners (1/4 Turn etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 300 | pfc2p-832-50 pem phillips recess panel fastener 300ss | 4 |
| |
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 1185-6 | heli-coil insert# 1185-6cn375 | 487 |
| |
| AEROSPCE | MN | Electrical Lugs & Terminals | 22-18 | bsv18x-my panduit butt splice awg 22-18 red | 400 |
| ||
| AEROSPCE | MN | Self-Clinching Standoff | Steel | Plain | bsos-832-34 1.062lg pem blindsee-07 standoff | 1090 |
| |
| F. Solutions | OH | Machine Screw | Nylon (Polyamide) | Plain | 1/4-20 x 1/2 | slotted pan head machine screw 1/4-20x1/2 nylon | 100 |
|
| F. Solutions | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1-14 x 4 | hex head cap screw 1-14(nf)x4 304 ss | 2 |
|
| F. Solutions | OH | Threaded Rod | 316, 317, A4 Stainless | Plain | 1/4-20 x 3 | threaded rod 1/4-20x3 f593 316 ss | 15 |
|
| F. Solutions | OH | Flat Washer | 316, 317, A4 Stainless | Plain | flat c6 (.149idx.375odx1/32 thk) 316ss | 825 |
| |
| National | Ont | Lock Nut, Nylon Insert | Steel | Plain | 6/6 | hex jam nut 3/8-24x.500x1/8 nyl 6/6 | 151580 |
|
| National | Ont | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M12-1.75 x 5.1 | m12x1.75x5.1gr al insert sz | 154 |
|
| Mansco | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | .546 x .470 | .546 x .470 natural felt insert nylon | 48000 |
| |
| AFI | FL | u-bake caps 600f (315c) () | 8000 |
| ||||
| AFI | FL | Broaching Stud | Steel | Plain | broaching threaded stud () | 694 |
| |
| AFI | FL | Drywall Screw | Steel | Plain | #8-15 x 3 | #8-15x3 phil bugle drywall screw st bp () () | 6000 |
|
| AFI | FL | Sems Machine Screw | Steel | Zinc/Clear | #4-40 x 5/8 | 4-40x5/8 phil pan int sems stl znc rohs () () | 2178 |
|
| AFI | FL | Cable Clamps & Ties | 6 | 6 inch cable tie nat 100 per bag () | 7600 |
| ||
| Global Fa | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5-0.45 x 8 | m2.5-0.45x8 ss phil/pan m/s a2 | 1900 |
|
| Global Fa | TX | Electrical Lugs & Terminals | pc quick disconnect concord electronics 707-0891-26 | 422 |
| |||
| IPC | VA | F436 Round Structural Washer | Steel | Plain | 3/4 | 3/4 uss flat f436 hardened steel 5/16 thick | 2,688 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | 1-12 | 1-12 light hex full height flexslot steel cad | 675 |
|
| IRF | NC | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/4-20 x 1 | 1/4-20x1 hex cap scr grade 2 zinc | 5,000 |
|
| Parker | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #0-80 x 5/32 | 0-80x5/32 socket head cap screw fully threaded 18-8 s/s 302hq passivated made in u.s.a. | 560 |
|
| Arden | WI | Flat Washer | Steel | Zinc/Clear | .781 x 1.25 x .025 | .781x1.25 x.025 fw thru-hard zc | inquire |
|
| THRDFAST | AL | Set Screw (Square Head) | Steel | Plain | 7/16-14 x 1 3/4 | square set cup pt b18.6.2 | 509 |
|
| THRDFAST | OK | Threaded Rod | Grade A36 | Galvanized | 7/8-9 x 18 | a36 a/t rod hdg b18.31.3 | 2 |
|
| THRDFAST | OK | Set Screw (Socket Head) | Steel | Plain | #10-24 x 1/2 | socket set cup pt b18.3 | 69 |
|
| THRDFAST | AL | Metal Drill Bits | Steel | Black Oxide | 3/8 | stubby drill bit xgo black & gold | 6 |
|
| THRDFAST | FL | Heavy Hex Nut | Grade 2H | Zinc/Clear | 1/2-13 | a194 2h hvy hex nut b18.2.2 b18.2.6 | 66 |
|
| THRDFAST | AL | Hex Tap Bolt (Fully Threaded) | Grade 5 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 2 | hex t/b teflon blue b18.2.1 | 122 |
|
| THRDFAST | OK | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 3/8-16 x 2 1/2 | full thread stud b18.2.1 b18.31.2 | 46 |
|
| THRDFAST | FL | Metal Drill Bits | h.s. jobber drill bit #p | 12 |
| |||
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 3/8-8 x 13 1/4 | astm a193 b7 all thread stud | 321 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M6-1.00 x 130 | socket c/s | 343 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 5/8-8 x 18 | astm a193 gr. b16 all thread stud | 587 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1-8 x 15 1/2 | 1-8x15-1/2 astm a193 gr. b16 all thread stud | 624 |
|
| Lightning | LA | Protective Caps & Plugs | Class 10.9 | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | M33-3.50 x 220 | M33-3.5x220 hex cap screw dacromet wrench size=50 dacromet 320 plus l silver/gray color | 40 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
