Self-Clinching Studs , 316, 317, A4 Stainless
Self-Clinching studs, Press-Fit Studs or Clinch Studs are installed by being pressed into a hole, embedding the head of the stud in the material, creating a secure lock into the sheet with high torque-out and pushout resistance.
4 results, (click on any line for more information)
|Buy Self-Clinching Studs from one of our FCH Network Members|
|MTP||CA||Self-Clinching Stud||316, 317, A4 Stainless||Plain||M6 x 25||m6 x 25 a4-80 s.s self clinch stud||stock|
|MTP||CA||Self-Clinching Stud||316, 317, A4 Stainless||Plain||M6 x 15||m6 x 15 a4-80 s.s self clinch stud||stock|
|Fastco||MI||Self-Clinching Stud||316, 317, A4 Stainless||Phosphate||overall length-31.6 / 30.9 mm washer diameter-12.7 / 12.3 mm flower under head diameter-.500 reference flower under head length-.037 / .033 groove under head da-.316 / .311 groove length-.047 / .043 shoulder diameter-.341 / .337 shoulder length-.039 / .034 thread m8-1.25 material 10b21 finish phosphate & dry to touch oil heat treat hrc 29-337 405 lbs. min tensile | clinch stud||12240|
|Fastco||MI||Self-Clinching Stud||316, 317, A4 Stainless||Plain||overall length-77.5 mm reference washer diameter-14.0 / 13.75 mm washer thickness-10.0 mm reference nib under head da (x8)-.065 reference nib under head height-.03 reference groove diameter-.316 / .310 groove width (from nib)-.025 / .020 end diameter-.251 / .246 end length-.192 / .162 thread m8-1.25 material 10b21 finish rust inhibitor heat treat hrc 33-39 | clinch stud||7245|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.