.png)
FCH Member Advertisement
FCH News
M6 Rivet Nuts
Internal Threaded Inserts, also known as Rivet Nuts, RivNut®, Blind Rivet Nuts, are internally threaded bushings that are inserted into a pre-drilled hole and then fixed in place by tightening a screw in the thread, thus expanding the body of the insert against the back side of the hole. The first rivet nut was created by BF Goodrich in the 1930s, and sold under the trademark RIVNUT®.
6,924 Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut), showing 200, (click on any line for more information)
| Search Results Sponsored by The Olander Company, your source for Internal Threaded Inserts. For more results, visit www.olander.com | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 | avk bearing set-for m6-1.0 () () | 1 |
| ||
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | avk knurled insert m6 4.20-6.60 grip () | 2080 |
| ||
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 | avk insert m6-1.0 stl non-rohs () | 882 |
|
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | avk fasteners avk stl ylw znc insert m6-1.0 | () | 100 |
| |
| Buy Rivet Nuts from one of our FCH Network Members | ||||||||
| GOEBEL | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 1.0 | grip range 0.70-4.20 go-nut lf semi hex- | 42,250 |
|
| GOEBEL | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 1.0 | grip range 4.20-6.60 go-nut lf semi hex- | 17,250 |
|
| Eurolink | SC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 16 | m6 x 16 art. 1025 a2 stainless steel countersunk open knurled blind rivet nut | inquire |
|
| Eurolink | SC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 16 | M6x16 art. 1023 a2 18-8 304 steel countersunk knurled blind rivet nut a2 s/s | inquire |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | ael insert m6 .7-4.20 mm gr flat head stl/zinc-yellow | 500 |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Rubber, Buna-N, Neoprene etc. | Plain | M6-1.0-1.00 | auvecopak well nuts m6-1.0 | 1 |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | dk insert steel m6 1stgripgrip min = 0.028grip max = 0.165 steel/zinc yellow 2 000 per carton | 8 |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | M6-1.00-1.00 (0.50-7.10) | m6 x 1.00grip 0.50-7.10 rivet nut pre-bulbed & slotted body | 372 |
| |
| Jackson | MS | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Nylon (Polyamide) | Plain | M6 | m6 jack nut nylon | 17 |
|
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | aethc-m6-3.0 atlas insert | 541 |
| |||
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | 6 mandrel for riv nutter | inquire |
| ||
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 0.70 4.2 | 6 0.70-4.2 grip hex rivet nuts | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 5.0 | 6 5.0 grip jack nut | 109950 |
| ||
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x 3.5 | 6 3.5 grip rivet nuts | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x 4.2 | 6 4.2 grip rivet nut thin wall/ csunk head | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x .7 4.2 | 6 .7-4.2 grip rivet nut ribbed | 10360 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 4.2 | 6 4.2 grip rivet nuts closed end ribbed | 17437 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x .70 4.2 | 6 .70-4.2 grip large flange rivet nuts ribbed | 9864 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 0.70 4.2 | 6 0.70-4.2 grip hex rivet nuts | 97953 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 4.2 | 6 4.2 grip rivet nuts hex body closed end | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x 6.6 | 6 6.6 grip rivet nut ribbed | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x 4.2 6.6 | 6 4.2-6.6 grip rivet nut ribbed | 18192 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 6.6 | 6 6.6 grip 18-8 s/s hex body rivet nuts | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 4.2 6.6 | 6 4.2-6.6 grip rivet nut hex body | 17215 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 6.6 | 6 6.6 grip rivet nuts wedge head ribbed | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 (2) | 6mm .70-4.2grip small flange steel rivet nuts ribbed closed end trivalent yellow zinc plated | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x 2.0 | 6mm 2.0 grip aluminum rivet nuts | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 3.0 | 6mm 3.0 grip steel flat head yellow zinc rivkle | inquire |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 4.2 | 6mm 4.2 grip 18-8 stainless rivet nuts ribbed | 3868 |
|
| Jay-Cee | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 4.2 | 6mm 4.2 grip 18-8 s/s hex body rivet nuts | inquire |
|
| Hayes | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 | m6-1.0 nutsert zinc ii | 17 |
|
| Hayes | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 x 15 | m6-1.0 x 15 (shank length) well nut | 38 |
| ||
| MESAFAST | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-0.165-.260 | M6 (.165-.260) small flange knurled body rivet nut z | 1,000.0 |
|
| MTP | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | m6 st/yzn cr3 knurled rivet nuts large flange 0.7 4.2 1 | 3,451 |
|
| MTP | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | m6 stl yzn knurled rivet nut small flange 0.7 4.2 | 1,400 |
|
| MTP | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | m6 stl yzn knurled rivet nut small flange 4.2 6.6 | stock |
|
| MTP | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | m6 stl yzn knurled rivet nut large flange 0.7 4.2 | 49,923 |
|
| MTP | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | m6 stl yzn knurled rivet nut large flange 4.2 6.6 | 24,880 |
|
| MTP | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | m6 st/zn smooth rivet nuts small flange 0.762 4.2 | stock |
| ||
| Liberty | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 3.5-5 | M6-1.0 rivet nut open end 3.5-5 grip range flat head large flange smooth body steel zinc yellow | 2,000 |
|
| Liberty | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 4.2 | M6-1.0x4.2 rivet nut open end thin wall half hex steel zinc yellow | 483 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.0-1.00 (0) | rivnut half hx body lg flange m6-1.0grip 0.7/4.2 stl zn clr cr3 | 21000 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 4.2 | m6-1.0 x 4.2 maxgrip cak series insert stl z/y rohs | 735 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-1.00 x 6.6 | M6-1.0x6.6 al series insert alum | 3500 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 6.6 | M6-1.0x6.6 max grip cak series insert stl z/y rohs | 5545 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 7.1 | avk3086 m6x7.1 ar insert with nibs yellow zinc (avk) | 30000 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 x 4.2 | M6-1.0x4.2 max grip al series steel insert rohs | 3900 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 7.1 | M6-1.0x7.1 grip ar series plusnut znc yellow | 20395 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 x 6.6 | m6-1.0 x 6.6mm ak series threaed insert steel zinc | 45000 |
|
| UNEEDA | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 1.0 x 16 | M6x1.0x16 rivnut rivnut-610-3.5 | 4000 |
|
| NAPPCO | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 1.0 | m6x1.0 rivet nut steel | 1497 |
|
| NAPPCO | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x -1.0 | avk aws9t-610 6mm-1.0 insert stl o/end | 20 |
|
| BHAM | AL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x .7-4.2 | M6-1.0 rivnut .7-4.2 grip stl yel zn | 6 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 4.2 | M6-1.0x4.2 ak series insert clsd end rohs zy | 15 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 x 4.2 | M6-1.0 x4.2 al series insert mnl tin | 364 |
| ||
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 4.2 | M6-1.0x4.2 ak series insert clsd end rohs zy | 50 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 | M6-1.0 steel nut-sert avk stl tin-znc rohs | 15 |
|
| End ries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 4.2 | M6x4.2 max grip insert steel zinc rohs | 10 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | cal2-610-4.2t m6 large flange knurled rivnut trivalent clear zinc | 3500 |
|
| Mansco | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 | M6-1.0 half hex rivnut triv znc (grip 0.7-4.2)-per print | 200 |
|
| Mansco | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-1.00 x 4.2 | M6-1.0x4.2 rivet nut stl zdc avk al series 100/box | 72 |
|
| Endries | WI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-1.00 x 6.6 | M6-1.0 x6.6 grip ak series insert alum avk | 4 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-1.00 | m6-1.0 tsn nutsert alum | 27800 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | m6 rnht rivet nut installation tool | 3 |
| ||
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Rubber, Buna-N, Neoprene etc. | Plain | M6 | m6 roof rack mounting rubber well nut | 3 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x .027-.165 | m6 x.027-.165 ribbed rivet nut stl yel znc 50/pkg | 12 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 | m6-1.0 mandrel for #39300 rivet nut setter | 3 |
| ||
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 | m6 roof rack mounting stl jack nut w/sealer | 6 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x .165-.260 | m6 x.165-.260 ribbed rivet nut stl yel znc 40/pkg | 5 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x .070-4.2 | m6-1.0 x .070-4.2mm ribbed rivet nut stl yel znc | | 1450 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 0.5-3.0 | m6-1.0 x 0.5-3.0 grip upo large flange rivet nut stainless steel | 200 |
|
| RAMCO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 1.0 x 0.7-4.2 | M6x1.0 0.7-4.2 rivet nut chrysler 06513374aa | 240037 |
| ||
| RAMCO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 1 | M6x1 open spin rivet nut | 5000 |
| ||
| RAMCO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 1.0 x 0.7-4.2 | M6x1.0 0.7-4.2 rivet nut | 57235 |
| ||
| RAMCO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | M6 knurled rivet nut zt2-sorting rivet nut | 2414 |
| ||
| DB Fasten | null | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | avk / avibank aks4t-610-4.2b avk m6 threaded insert closed end | inquire |
|
| DB Fasten | null | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | avk / avibank aks4t-610-6.6b avk m6 threaded insert closed end | inquire |
|
| CIF | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M6 x 1.0 | M06x1.0 expansion nut 1050 plated with geomet zinc plus sealer (71170) (65170) (66870) () | 52870 |
|
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 | avk bearing set-for m6-1.0 () () | 1 |
| ||
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | avk knurled insert m6 4.20-6.60 grip () | 2080 |
| ||
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-1.00 | m6-1.0 tsn nutsert alum | 100 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Rubber, Buna-N, Neoprene etc. | Plain | M6 | m6 roof rack mounting rubber well nut | 2 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x .027-.165 | m6 x.027-.165 ribbed rivet nut stl yel znc 50/pkg | 4 |
|
| Ababa | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 | m6-1.0 mandrel for #39300 rivet nut setter | 1 |
| ||
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.5-4.0 | M6 (1.5-4.0 grip) knurled round body countersink head 18-8ss openend rivetnut rohs | 2,000 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Brass | Plain | M6 x 1.0 | M6x1.0 (.7-4.2 grip) rivnut-half hex full hd insert nut .60C1IHFBP | 26,000 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 1.0 | (.7-4.20 grip) stl full hd knurled insert nut closed end zn/ rohs compliant | 2,750 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | (0.5-7.1 grip) quadranut large head stl/ openend rivetnut rohs | 93,350 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | (0.5-3.0 grip) halfhex-h body large head stl/ openend rivetnut rohs | 235 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 | M6-1xgrip #1 .5/3.0 rivet nut-half hex body r | 6,000 |
| ||
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | (0.5-3.0 grip) knurled round body reduced head 18-8ss openend rivetnut rohs | 3,500 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | (0.5-3.0 grip) knurled round body reduced head stl/ openend rivetnut rohs | 895 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Brass | Zinc/Clear | M6 x 1.0 | (4.2-6.6 grip) half hex full hd insert nut rohs compliant | 21,000 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 30.23 | M6x30.23 (4.2-6.6 grip) large flange knurled rivnut closed end rohs compliant .60C2IKFSYCE | 9,400 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 17.26 | M6x17.26 reduced flange knurled rivnut rohs compliant .60C2IKRSY | 73,570 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 17.26 | M6x17.26 (4.2-6.6 grip) large flange knurled rivnut rohs compliant .60C2IKFSY | 61,370 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 x 22.90 | M6-1.0x22.90 oal(5.0-10.0 grip) jack nut steel zp rohs compliant dwg_jk (/jk-0602) | 29,850 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Brass | Plain | M6-1.00 | well nut /epdm rohs compliant | 400 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Brass | Plain | M6-1.00 | well nut /epdm rohs compliant | 35,950 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 x 18.6 | M6-1.0x18.6 oal( 0-5.0 grip) jack nut zp rohs compliant | 39,875 |
|
| Exim | S'pore | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 1.0 | rivet nut hex steel zinc m6 x 1.0p15.00 x 9.530 x 14.60 mm0.591 x 0.375 x 0.575 in | 4 |
|
| Global | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-0.50 3.0 | 130-1611 riv-nut m6 large flat head closed end m6-0.5-3.0 grip 300 ss | 429 |
|
| MidStates | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | ASTM F1941-10 Fe/Zn-Ni | M6-1.00 | M6-1.0 atlas insert gm6138m coating | 506 |
| |
| WDMB | IA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 1.0 | e/nut-well-pop-d1420-m6x1.0 (W000) (W000) (W000) | 1,110 |
| ||
| OneMonroe | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 3.8-5.0 | rivet nut m6 thread steel grip range 3.8-5.0 | 88 |
|
| OneMonroe | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | insert m6 thread steel/zinc yellow tsn | 3794 |
|
| RePneu To | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 | M6 rivnut steel | 4850 |
|
| RePneu To | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6 x .70-4.2 | M6 .70-4.2 grip rivet nut aluminum | 20000 |
|
| Buckeye | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6-1.00 | m6 x 1.0 (.7-4.20 grip) rivet nut | inquire |
| ||
| IRF | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | M6 (0.5-3.0 grip) knurled round body reduced head stl/zinc openend rivetnut rohs | 1,000 |
|
| IRF | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 x 18.6 | M6-1.0x18.6 oal( 0-5.0 grip) jack nut steel zp rohs compliant/jk-060 | 6,000 |
|
| IRF | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 x 14.5 | M6-1.0x14.5 (.5-3.0 grip) large hd knurled stl rivnut rohs compliant 0371106009 0371106009 | 25 |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-23 | m6-23-alumum blind rivet nut din brn-fc aluminum plain | 5 |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-19 | m6-19 blind rivet nut steel plain | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Brass | Plain | M6-16-brass | m6-16-brass blind rivet nut din brn-fo plain | 62 |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-23 | mm6-23 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-26 | mm6-26 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-16 | mm6-16 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-26 | mm6-26 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-23 | mm6-23 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-16 | mm6-16 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-19 | mm6-19 blind rivet nut aluminum | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-14.50 | mm6-14.5 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-16 | mm6-16 blind rivet nut steel | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-14.60 | mm6-14.6 blind rivet nut steel m | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 1 | m6x1 well nut din 867g | inquire |
| ||
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-30 | mm6-30 blind rivet nut a2 m | inquire |
|
| MMCC | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 4.1 | maenmm6-4.1 rivet nut aenmm6 4.1 din 867g | inquire |
| ||
| WDMB | IA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | M6-1.00 x 0.5 x 7.1 | nut rivet st (bzt) m6-1.0x0.5 7.1 drw (W050) (W050) | 20,000 |
| |
| WDMB | IA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | M6-1.00 x 7.1 x 12.7 | nut rivet st (a2c) m6-1.0x7.1 12.7 drw (W050) (W050) | 6,000 |
| |
| WDMB | IA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | nut rivnut sst m6 sherex tu ssm8upo30 1902534669090 1 | 50 |
|
| QFC | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | M6 riv nut | 1500 |
| ||
| QFC | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 0.7-4.2 | M6-1.0x0.7-4.2 grip closed end w/wedges zinc yellow rivnut | 300 |
|
| QFC | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 0.7-4.2 | M6-1.0x0.7-4.2 grip closed end w/wedges zinc yellow rivnut | 2100 |
|
| EFC | MO | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 | M6 closed end rivet nut atlas engineering aels8-610-4.2b | 500 |
|
| Marshall | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Tin Plated | M6 x 1.0 x (M.70 M3.17) | avk / avibank avk4278 m6-1.0 x m.70-m3.17 grip thrded insert square hole closed end | 8400 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | M6 (0.5-7.1 grip) plusnut stl/ openend rivetnut rohs .60C1IPNSY | 36,310 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 1.0 | M6x1.0 (4.20-6.60 grip) stl half hex reduced hd rivet nut zn rohs compliant | 5 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | M6 (0.5-3.0 grip) knurled round body large head stl/zinc openend rivetnut rohs 0371106009 | 25 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | M6 (0.5-3.0 grip) halfhex body reduced head 18-8ss openend rivetnut rohs | 39,995 |
|
| ACF | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Cadmium | M6 | 6 metric s/s at insert cadmium plated | 135 |
|
| ACF | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Cadmium | M6 | 6 metric steel at insert cad | 7753 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 400 Stainless (405, 410,416,420,430 etc.) | Zinc/Yellow | M6-1.00 x 3.00 | m6x1.0x3.00 metric thin head hex body rivet nut steel zinc yellow dichromate | 50,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-1.00 x 5.00 | m6x1.0x5.00 metric flat head rivet nut aluminum cleaned and polished non-ribbed | 50,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain | M6-1.00 x 3.50 | m6x1.0x3.50 metric flat head rivet nut aluminum cleaned and polished non-ribbed | 50,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 5.00 | m6x1.0x5.00 metric flat head round open-end rivet nut steel zinc yellow dichromate | 50,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 5.70 | m6x1.0x5.70 metric flat head round open-end ribbed threaded insert rivet nut steel z/y | 50,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 3.50 | m6x1.0x3.50 metric flat head round open-end rivet nut steel zinc yellow dichromate | 50,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 5.70 | m6x1.0x5.70 metric thin head round open-end ribbed rivet nut steel zinc yellow zinc | 25,000 |
|
| Kanebridge | IL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6-1.00 x 3.20 | m6x1.0x3.20 metric thin head round open-end ribbed rivet nut steel zinc yellow zinc | 50,000 |
|
| General F | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 | M6-1.0 special insert zn clr | 2,486,168 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 23.5 | M6x23.5 hex drive steel external insert | 1000 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6 x 23.5 | M6x23.5 hex drive steel external insert | 1000 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Black | M6 x 1.0 | M6x1.0 (.7-4.2 grip) rivnut-half hex full hd insert nut nickel black & wax .60C1IHFSZNBLACK | 33035 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 1.0 | (.7-4.2 grip) stl half hex full hd insert nut -s437 rohs compliant | 27335 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 1.0 | (.7-4.20 grip) stl full hd knurled insert nut closed end zn/ rohs compliant | 8350 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | M6 (0.5-7.1 grip) plusnut stl/ openend rivetnut rohs .60C1IPNSY | 10 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | (0.5-7.1 grip) quadranut large head stl/ openend rivetnut rohs | 103950 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | (1.5-4.0 grip) knurled round body csunk head stl/ openend rivetnut rohs | 569 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | (0.5-3.0 grip) knurled round body reduced head 18-8ss openend rivetnut rohs | 8485 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 17.26 | M6x17.26 (4.2-6.6 grip) large flange knurled rivnut rohs compliant .60C2IKFSY | 73125 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 17.26 | M6x17.26 large flange knurled rivnut nickel clear & wax rohs compliant .60C2IKFSZNCLEAR | 1725 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 17.26 | M6x17.26 (4.2-6.6 grip) large flange knurled rivnut rohs compliant .60C2IKFSY | 73125 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 17.26 | M6x17.26 (4.2-6.6 grip) large flange knurled rivnut rohs compliant .60C2IKFSY | 73125 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 17.26 | M6x17.26 reduced flange knurled rivnut rohs compliant .60C2IKRSY | 21000 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Zinc/Clear | M6 | 6 large flange round body (grip 3.0-4.5) rivnut rohs compliant .60C2IRLAPPRINT | 14600 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 x 15.7 | 6x15.7 (grip 3.0-5.5) large flange knurled stl rivnut /nickel .60C2NKLSZN | 35430 |
|
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | M6 rivnut anvil 2361-1306-030 | 10 |
| ||
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | manual rivet nut tool m3 m4 m5 m6 | 10 |
| ||
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | M6 spin/spin air rivet nut gun | 2 |
| ||
| IRF | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | manual rivet nut tool- came with m3 m4 m5 m6 | 51 |
| ||
| Trifast | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | m6 minisert stainless for 2.0mm sheet plain self finish | 500 |
|
| Trifast | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6 | m6red stl halfhex open blind rivnut1.0-2.5 rohs zinc clear | 25000 |
|
| BAYFASTCO | FL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Rubber, Buna-N, Neoprene etc. | Plain | M6 | m6 well nut neoprene .630 oal | 1429 |
|
| FastWare | Sask | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | M6 nutsert (57387) | 1,691 |
|
| FastWare | Sask | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | M6 nutsert(als4-610-6.6) | 985 |
|
| SRF | AL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Cadmium | M6-1.00 | M6-1.0 knurled brass insert avk # AVKAKB2-610-4.2 | - |
|
| Wurth Ada | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | blindniet mu avk als4 610 6 6 m6 | 25,638 |
| ||
| API | IA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | M6-1.00 | rivnut m6x1 per print (tu-sm6up055) | 6,183 |
|
| GUIDON | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x .70MM 4.22MM | AVK / Avibank ASS4-610-4.2-15.0 | 2,500 |
|
| GUIDON | NJ | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 x 25 | AVK / Avibank ASS4-610-4.2-25.0 | 1,250 |
|
| Wurth Ind | D.F. | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | M6-1.00 | m6-1.0 thinseet nutsert steel 0.70-4.2mm grip insert | - |
|
| All Size | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 x 1.5 | m6 x 1.5 rivet nut w/stud | 2,500 |
| ||
| Eurolink | SC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | m6 ut/ros 4.5 bn 1972 plain finish | inquire |
|
| Wurth | IN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | M6 | m6 metal insert per print 0991458174 pack 1000 per poly bag | 95,000 |
| ||
| Wurth | IN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | M6 | m6 4.2-6.6 rivet nut stl zinc/yellow pack 2500 per poly bag | 3,500 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
