FCH Member Advertisement
FCH News
Measuring Tools , Steel
Measuring tools are a wide category of devices used to measure length, diameter, thread pitch, height, or any distance between two points. Measuring tools could be calipers, micrometers, thread gauge tools, or tape measures.
156 results, (click on any line for more information)
| Buy Measuring Tools from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| METRO IND | OH | Measuring Tools | Steel | metric feeler gage 13pc set | 2 |
| ||
| MAINSOURC | NH | Measuring Tools | Steel | Galvanized | 1 5/8 x 10 | 1-5/8x10 slotted channel 12 gauge(.099-.105) pre galv. | 1100 |
|
| Jackson | MS | Measuring Tools | Steel | Zinc/Yellow | 5/16 sae flat washer 11/32 id x 11/16 od 16 gauge 192/lb zinc & yellow dichromate | 20260 |
| |
| Jackson | MS | Measuring Tools | Steel | Black Oxide | 1/4 | 1/4 uss flat washer 5/16 id x 3/4 od 16 gauge 149/lb black oxide | 2761 |
|
| Jackson | MS | Measuring Tools | Steel | Zinc/Black | 5/16 | 5/16 uss flat washer black zinc 3/8 id x 7/8 od 14 gauge 87/lb | 4002 |
|
| Jackson | MS | Measuring Tools | Steel | Zinc/Clear | 1/2 x 7/8 x 18 | 1/2 idx7/8 odx18 gauge machine bushing | 200 |
|
| Jackson | MS | Measuring Tools | Steel | Zinc/Clear | 5/8 x 1 x 10 | 5/8 idx1 odx10 gauge machine bushing | 48 |
|
| Cal Fastenrs | CA | Measuring Tools | Steel | Zinc/Clear | 22 | .165-.167 id x .630 od x .0209-.0269 thk f/w h/t trivalent zinc 22 gauge f/w heat-treat to rc18-22 trivalent zinc | 22 gauge f/w heat-treat to rc18-22 trivalent zinc | 22 gauge f/w heat-treat to rc18-22 trivalent zinc | 22 gauge f/w heat-treat to rc18-22 trivalent zinc | 22 gauge f/w heat-treat to rc18-22 trivalent zinc | 13,000 |
|
| Setko Fas | IL | Measuring Tools | Steel | Black Oxide | 1 1/2 x 1 3/4 | 1 1/2x1 3/4 rectangular black poly insert glide 14-20 gauge | 2500 |
|
| SWACO | OH | Measuring Tools | Steel | Zinc/Clear | 1 | 1x2x0.075 14 gauge shim stl zi | 731 |
|
| NAPPCO | TX | Measuring Tools | Steel | Plain | 16 x 3/4 | 16 x 3/4 blade tape measure | 11 |
|
| NAPPCO | TX | Measuring Tools | Steel | Black Oxide | round insert glide 1 16 gauge blk nylon | 92 |
| |
| YANKEE | NH | Measuring Tools | Steel | industrial steel shelving 36 x 12 x 75-20 gauge steel shelves-with 6 shelves | 5 |
| ||
| OneMonroe | NC | Measuring Tools | Steel | Zinc/Clear | drill plate gauge for letters a-z | 2 |
| |
| OneMonroe | NC | Measuring Tools | Steel | 1 1/4 | 1-1/4 16-18 gauge square steel caster socket 7/16 friction ring stem. | 91 |
| |
| OneMonroe | NC | Measuring Tools | Steel | 36 x 4.5 | piano hinges-cold rolled steel 36 x 4.5 . pin 1/2 knuckle 1 .074 gauge | 2 |
| |
| OneMonroe | NC | Measuring Tools | Steel | 36 | overall ht 36 4 swivel casters 4-position swivel locks 1 floor lock. 12 gauge steel.weight 160 lbs. 5000lb cap. | 1 |
| |
| OneMonroe | NC | Measuring Tools | Steel | komelon n6300 300-feet open reel metal frame long steel tape measure | 1 |
| ||
| OneMonroe | NC | Measuring Tools | Steel | Zinc/Yellow | 1 x 30 | 1 x30 yellow/black steel gripper tape measure | 8 |
|
| NutsBolts | NE | Measuring Tools | Steel | Galvanized | 1 5/8 x 20 | 1 5/8x20 slotted pregalv strut 12 gauge | 800 |
|
| Hodell | OH | Measuring Tools | Steel | M25 | 25mm clip 18 gauge cold rol stl plnfinish | 125 |
| |
| Raw Produ | NJ | Measuring Tools | Steel | Galvanized | 1 5/8 x 1 5/8 | strut-slotted-hot dipped galvanized steel-10ft 1-5/8 x 1-5/8 (12 gauge) | 500 |
|
| Endries | WI | Measuring Tools | Steel | Galvanized | 5/8 x 23 | 23010 5/8x23 gauge headless brad pin electro galvanized | 2 |
|
| Endries | WI | Measuring Tools | Steel | Black Oxide | 1 1/2 x 2 | 1-1/2x2 rectangular tube cap 10-14 gauge blk | 215 |
|
| Endries | WI | Measuring Tools | Steel | 5/8 x .023 | 5/8x.023 gauge steel strapping 100lbs 2046 | 1 |
| |
| Mansco | MI | Measuring Tools | Steel | Zinc/Clear | 1 x 16 | 1 16 gauge square black hdpe threaded adaptor with 1/4-20 zp steel propell nut | 54 |
|
| Mansco | MI | Measuring Tools | Steel | 1/4-20 x 3/4 dia 16-18 gauge heavy duty steel tube connector | 215 |
| ||
| Mansco | MI | Measuring Tools | Steel | Black Oxide | corner bracket steel black oxide 11 gauge | 2800 |
| |
| Mansco | MI | Measuring Tools | Steel | 1/4-20 x 1-1/4 dia 16-18 gauge heavy duty steel tube connector | 500 |
| ||
| Mansco | MI | Measuring Tools | Steel | Zinc/Clear | 1.15 x 1-3/4 l bracket 11 gauge triv zinc | 3471 |
| |
| Mansco | MI | Measuring Tools | Steel | 1/4-20 x 1 | 1/4-20x1 tube od 12-14 gauge heavy duty steel tube connector | 1998 |
| |
| Hodell | OH | Measuring Tools | Steel | Plain | M25 | 25 clip 18 gauge cold rol stl pln () | 125 |
|
| Mansco | MI | Measuring Tools | Steel | Zinc/Clear | angle bracket 14 gauge triv znc | 400 |
| |
| Century | NY | Measuring Tools | Steel | Black Oxide | null |
| ||
| Ababa | CA | Measuring Tools | Steel | ababa steel screw gauge both inch & metric | 98 |
| ||
| Ababa | CA | Measuring Tools | Steel | Zinc/Clear | .380 x .750 x .104 | .380 x .750 x .104 (12 gauge). flat washer steel zinc pltd | 71865 |
|
| Ababa | CA | Measuring Tools | Steel | ababa steel screw gauge both inch & metric | 34 |
| ||
| Century | NY | Measuring Tools | Steel | Zinc/Clear | 1/4-20 x 1 3/4 | 1/4-20x1-3/4 uns ihh ms(7/16af)stl blk zi must gauge 2a after plt rohs(1500per) | 30700 |
|
| SII | IN | Measuring Tools | Steel | 5 | 5 gallon type l safety gasoline can with f-15 funnel heavy gauge steel sturdy bottom rim & carrying handle | 1 |
| |
| SII | IN | Measuring Tools | Steel | Galvanized | 52 x 11 | 5 lb 2x11 gauge fasn-rite electro galvanized roofing nails | 2 |
|
| SII | IN | Measuring Tools | Steel | Plain | 3/4 x 14 | 3/4 x 14 gauge plain finish narrow machinery bushing | 700 |
|
| SII | IN | Measuring Tools | Steel | Plain | 1 1/4 x 14 | 1-1/4 x 14 gauge plain finish narrow machinery bushing | 318 |
|
| SII | IN | Measuring Tools | Steel | heavy spring tempered steel ruler with inch graduations with hook 4r style graduations 48 length 1-1/2 width 1/10 thickness | 1 |
| ||
| SII | IN | Measuring Tools | Steel | Plain | 1 x 10 | 1 x 10 gauge plain finish narrow machinery bushing | 77 |
|
| OneMonroe | TX | Measuring Tools | Steel | Zinc/Clear | roctite 9-18x2 1/4 sharp point steel dorrltech plated 20to26 gauge steel stud | 18 |
| |
| Rapid | NY | Measuring Tools | Steel | 0.079 | steel 0.079 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | 0.142 | steel 0.142 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | 0.185 | steel 0.185 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0110 | steel .0110 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0130 | steel .0130 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0150 | steel .0150 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0160 | steel .0160 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0210 | steel .0210 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0630 | steel .0630 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0780 | steel .0780 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0940 | steel .0940 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Rapid | NY | Measuring Tools | Steel | .0980 | steel .0980 class zz minus steel pin gage member 2 inch long | 1 |
| |
| Purchase | MO | Measuring Tools | Steel | Galvanized | 13 | 13 gauge x 6 galvanized wire form per print | 500 |
|
| Purchase | MO | Measuring Tools | Steel | Black Oxide | 1 x 2 | 1 x 2 black end caps 16 gauge | 3893 |
|
| Purchase | MO | Measuring Tools | Steel | Black Oxide | 1 | 1 square plug black 18/19 gauge | 5829 |
|
| IPC | VA | Measuring Tools | Steel | Galvanized | f20 3/4 b#75 18 gauge galvinized brads | 45,000 |
| |
| IPC | VA | Measuring Tools | Steel | Zinc/Yellow | 1 x 33 | 1 wx33 l komelon professional nylon coated steel blade tape measure yellow case | 85 |
|
| IPC | VA | Measuring Tools | Steel | Zinc/Clear | 1 1/4 | 1 1/4 cored square pipe plug cast iron .0002 thk zinc plated (threaded products only) must be rack plated after machined must pass npt gauge and free of dings | 445 |
|
| IPC | VA | Measuring Tools | Steel | Phosphate | 1/4-20 x 2 1/2 | 1/4-20x2 1/2 12 pt. flange screw 1 max thread length gmw-3179h phos & oil (this item can not be fully threaded) must gauge 3a after plating | 2,285 |
|
| IPC | VA | Measuring Tools | Steel | Zinc/Clear | 1 1/2 | 1 1/2 cored square pipe plug cast iron .0002 thk zinc plated must be rack plated after machined must pass npt gauge and free of dings | 1,003 |
|
| IPC | VA | Measuring Tools | Steel | Phosphate | 1/4-20 x 1 3/4 | 1/4-20x1 3/4 12 pt. flange screw 1 1/4 full theread (this item can not be fully threaded) gmw-3179h phos & oil must gauge 3a after plating | 1,830 |
|
| IPC | VA | Measuring Tools | Steel | Galvanized | 16 | 16 gauge 8 long double loop tie galvanized | 2,155 |
|
| IPC | VA | Measuring Tools | Steel | Zinc/Clear | 1 | 1 cored square pipe plug cast iron .0002 thk zinc plated must be rack plated after machined must pass npt gauge and free of dings | 2,572 |
|
| IPC | VA | Measuring Tools | Steel | 3/4 x 16 | 3/4x16 tape measure steel stanley only | 2 |
| |
| HBBOLT | CA | Measuring Tools | Steel | M.0015-0.025 x .037 | amer./ combo feeler gauges am .0015-.025 .037-.635 am .0015-.025 .037-.635 | 4 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | M8-1.25 | go/nogo plug gage din 720 hardened steel plain | 1 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | 61-6 | hole gage din mhg hardened steel plain | 1 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | vernier caliper din mvc hardened steel plain | 16 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | hole gage din mhg hardened steel plain | 1 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | hole gage din mhg hardened steel plain | 4 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | .5-5 | gear mod id gage din mmc55 hardened steel plain | 113 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | 61-15 | hole gage din mhg hardened steel plain | 3 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | 769-bsp | screw pitch gage din mtpg hardened steel plain | 123 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | 58-13 | thickness gage din mtg hardened steel plain | 207 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | M69-M.00 | screw pitch gage din mtpg hardened steel plain | 481 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | 58-8 | thickness gage din mtg hardened steel plain | 21 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | go ring gage hardened steel plain | inquire |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | screw pitch gage din mtpg hardened steel plain | 147 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | 769-bsw | 769-bsw screw pitch gage din mtpg hardened steel plain | 89 |
|
| MMCC | IL | Measuring Tools | Steel | Plain | nogo ring gage din pg907 hardened steel plain | 1 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | M5-0.80 | go/nogo plug gage din 720 hardened steel plain | inquire |
|
| MMCC | IL | Measuring Tools | Steel | Plain | nogo ring gage hardened steel plain | inquire |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | nogo ring gage din pg907 hardened steel plain | 1 |
| |
| MMCC | IL | Measuring Tools | Steel | Plain | M6 x 1 | go ring gage hardened steel plain | inquire |
|
| MMCC | IL | Measuring Tools | Steel | Plain | M1 x .25 | go ring gage din 723 hardened steel plain | inquire |
|
| QFC | TX | Measuring Tools | Steel | Zinc/Clear | 9 | 9 gaugex1-1/2 joist hanger nail bright zinc | 3500 |
|
| Hodell | OH | Measuring Tools | Steel | Plain | 1/2-13 x 2 1/4 | 1/2-13x2 1/4 a193 b8 cl2 f/t stud1st-1st plain finish threads must be clean grease and oil free chamfered ends no nicked threads. stud must be able to pass go/no-go gauges. | 150 |
|
| Hodell | OH | Measuring Tools | Steel | Plain | 1/2-13 x 2 1/4 | 1/2-13x2 1/4 a193 b8 cl2 f/t stud 1st-1st plain finish threads must be clean grease and oil free chamfered ends no nicked threads. stud must be able to pass go/no-go gauges. | 150 |
|
| SIS | AZ | Measuring Tools | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | bracket aiming stop cross arm head 12 gauge cqcrs w/magni 565 | 9710 |
| |
| ACF | CA | Measuring Tools | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 18 | 18 gauge teflon tubing natural 500 rolls only | 1500 |
|
| QFC | TX | Measuring Tools | Steel | Plain | t 7/16-14 2f hs sppt pl vega | 1 |
| |
| QFC | TX | Measuring Tools | Steel | Plain | t 7/16-20 2f hs sppt pl vega | 1 |
| |
| QFC | TX | Measuring Tools | Steel | Plain | t 10-24 sppt pl 3f h3 superhss | 43 |
| |
| BHAM | AL | Measuring Tools | Steel | 14770 bolt gauge | 1 |
| ||
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 1.143 x 1 3/4 x 10 | 1.143 idx1 3/4 odx10 gauge machine bushing (id +0.010/+0.025) | 1,856 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/16 x 2 1/2 x 10 | 1 1/16 idx2 1/2 odx10 gauge machine bushing c1045 hardened (id +0.010/-0.010) rc 38-45 | 1,220 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 7/8 x 1 3/8 x 14 | 7/8 idx1 3/8 odx14 gauge machine bushing (id +0.010/+0.025) | 891 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 7/8 x 1 3/8 x 14 | 7/8 idx1 3/8 odx14 gauge machine bushing (id +0.010/+0.025) | 300 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 3/4 x 1 1/4 x 12 | 3/4 idx1 1/4 odx12 gauge machine bushing (id +0.010/+0.025) | 2,590 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 1 1/4 x 1 7/8 x 12 | 1 1/4 idx1 7/8 odx12 gauge machine bushing (id +0.010/+0.025) | 517 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 3/8 x 2 1/8 x 14 | 1 3/8 idx2 1/8 odx14 gauge machine bushing (id +0.010/+0.025) | 7 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/8 x 1 5/8 x 14 | 1 1/8 idx1 5/8 odx14 gauge machine bushing (id +0.010/+0.025) | 38 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/8 x 1 3/4 x 18 | 1 1/8 idx1 3/4 odx18 gauge machine bushing (id +0.010/+0.025) | 4 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 3/8 x 2 1/8 x 18 | 1 3/8 idx2 1/8 odx18 gauge machine bushing (id +0.010/+0.025) | 74 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/4 x 2 1/4 x 10 | 1 1/4 idx2 1/4 odx10 gauge machine bushing (id +0.010/+0.025) | 37 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 21/32 x 1 5/16 x 10 | 21/32 idx1 5/16 odx10 gauge machine bushing | 19 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | M40 x 46 x 16 | 40 idx46 odx16 gauge flat washer | 5,032 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 44.7 | mm idx54mm odx16 gauge flat washer | 3,464 |
|
| FastWare | Sask | Measuring Tools | Steel | Galvanized | 2 1/2 | gauge brad nail ( 2500 pieces ) | 5 |
|
| FastWare | Sask | Measuring Tools | Steel | Galvanized | 3/4 | gauge brad nail ( 5000 pieces ) | 5 |
|
| FastWare | Sask | Measuring Tools | Steel | Galvanized | 2 | gauge brad nail ( 2500 pieces ) | 2 |
|
| FastWare | Sask | Measuring Tools | Steel | Galvanized | 2 | gauge brad nail ( 5000 pieces ) | 2 |
|
| FastWare | Sask | Measuring Tools | Steel | Galvanized | 1 1/2 | gauge brad nail ( 5000 pieces ) | 1 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1.53 x 3 x 0.0478 18 | 1.53 idx3 odx0.0478 18 gauge flat washer | 6,904 |
|
| ASFCORP | MI | Measuring Tools | Steel | Galvanized | 1 5/8 x 13/16 x 14 | 1 5/8 x 13/16 x 14 gauge solid pre-galvanized channel | 200 |
|
| OBRIEN | OH | Measuring Tools | Steel | Zinc/Clear | 1 1/2 id 2 1/4 od 10 gauge bushing | 250 |
| |
| OBRIEN | OH | Measuring Tools | Steel | Plain | 1 | 1.28 id 3.00 od .060 (16 gauge) thk | 56 |
|
| All Size | TX | Measuring Tools | Steel | Plain | 1 1/2 x 1 | 1 1/2 x 1 10 gauge plain mach bushing | 207 |
|
| FACCA | Ont | Measuring Tools | Steel | Nickel Plated | furniture glide internal retainer style non-swivel type with cushion for 1 1/8 square #20 gauge tubing steel base nickel plated | 5,600 |
| |
| FACCA | Ont | Measuring Tools | Steel | Nickel Plated | #16-18 | plug button for square tubing for 3/4 od square tubing 16-18 gauge c1010-steel nickel plated | 16,800 |
|
| FACCA | Ont | Measuring Tools | Steel | Zinc/Clear | 3 x 3/4 | straight mending plate ctsk holes 3 x 3/4 x .074 gauge x 3/4 w 4-#7 countersunk holes steel zinc plated | 1,000 |
|
| FACCA | Ont | Measuring Tools | Steel | Plain | 3/16 x 1 7/8 | utility compression spring 3/16 od x 1 7/8 length no hooks 32-34 coils 1/32 wire gauge plain steel | 1,635 |
|
| FACCA | Ont | Measuring Tools | Steel | Plain | 1 | compression spring 1 id x .177 gauge 2.85 free lg 10 coils right hand ends square and ground spring steel plain | 63 |
|
| FACCA | Ont | Measuring Tools | Steel | Brass Plated | #4 | triangle ring picture hanger #4/14 gauge holes steel brass plated | 76,000 |
|
| FACCA | Ont | Measuring Tools | Steel | Brass Plated | #2 | triangle ring picture hanger #2/16 gauge holes steel brass plated | 102,000 |
|
| FACCA | Ont | Measuring Tools | Steel | Brass Plated | #2 | triangle ring picture hanger #2/16 gauge holes steel brass plated | 102000 |
|
| FACCA | Ont | Measuring Tools | Steel | Brass Plated | #4 | triangle ring picture hanger #4/14 gauge holes steel brass plated | 76000 |
|
| Wurth | IN | Measuring Tools | Steel | 0.006 x 25 | 0.006 x 25ft coil high carbon spring stl feeler gauge | 6 |
| |
| DBC | IL | Measuring Tools | Steel | bg standard bolt gauge | 97 |
| ||
| DBC | IL | Measuring Tools | Steel | bg standard bolt gauge | 96 |
| ||
| DBC | IL | Measuring Tools | Steel | bg standard bolt gauge | 96 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
