FCH Member Advertisement
FCH News
1, Industrial Hardware
> 200 matches, 1, Industrial Hardware. Showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jay-Cee | MI | Grommets & Eyelets | Brass | Plain | 1/16 x 3/32 | eyelets | inquire |
|
| Jay-Cee | MI | Grommets & Eyelets | Brass | Plain | 1/16 x 1/8 | eyelets | inquire |
|
| Jay-Cee | MI | Grommets & Eyelets | Brass | Plain | 1/16 x 3/16 | eyelets | inquire |
|
| Jay-Cee | MI | Grommets & Eyelets | Brass | Plain | 13/64 x 3/16 | eyelets | 14800 |
|
| Jay-Cee | MI | Grommets & Eyelets | Brass | Plain | 1/4 x 7/32 | eyelets | inquire |
|
| Endries | WI | Knobs & Star Grips | 10-32 x 3/8 | push/pull knob 10-32 x 3/8 fi-185 black | 76 |
| ||
| OneMonroe | MN | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 1/8 x 3/8 | grommet buna-n 50 durometer 1/8 id x 3/8 hole 1/2 od x 5/16 thick | 197 |
|
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 1/2-13 x 1/2 | 1/2-13x1/2 thick nc springless unistrut nut case hard & | 27 |
|
| OneMonroe | MN | Knobs & Star Grips | 1/4-20 x .50 | mbt knurled knob 1/4-20 x .50 | 4 |
| ||
| OneMonroe | MN | Knobs & Star Grips | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4-20 x .50 | 5 lobe knob 1/4-20 x .50 ss | 16 |
| |
| Endries | WI | Staples | Steel | Galvanized | 1 x 7/8 | 36021 1x7/8 16 gauge chsl point stpl galvanized sold per staple | 350000 |
|
| Endries | WI | Handwheels | 1/4-20 x 1 | handwheel 1.18dia male 1/4-20x1 | 10 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 1/2-13 x 1 | caster swivel threaded stem stm sz 1/2-13 x 1 wheel sz 2 x 13/16 dual wheel wheel mat so ft rubber bearing plain bore w/side brake load ht 2-3/4 load cap 180 lbs temp rt-40 to 180 f | 26 |
|
| OneMonroe | MN | Knobs & Star Grips | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4-20 x 1.00 | 5 lobe knob 1/4-20 x 1.00 ss | 1 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 1/2-13 x 1 | caster swivel threaded stem sz 1/2-13 x 1 wheel sz 3 x 1 wheel mat monotech finish white bearing plain bore load ht 4 load cap 110 lbs temp rt-20 to +180 f wheel brake | 12 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 1/2-13 x 1 | caster swivel threaded stem stm sz 1/2-13unc x 1 wheel sz 4 x 1-1/4 wheel mat black soft rubber bearing plain bore load ht 5-1/8 load cap 165 lbs temp rt-40 to +160 f | 4 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 1/2-13 x 1 | caster swivel threaded stem stm sz 1/2-13unc x 1 wheel sz 5 x 1-1/4 wheel mat black polyolefin bearing plain bore w/tread lock brake load ht 6-1/8 load cap 300 lbs temp rt-20 to +180 f | 4 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 1/2-13 x 1 | caster swivel threaded stem stm sz 1/2-13unc x 1 wheel sz 5 x 1-1/4 wheel mat black soft rubber bearing plain bore w/tread lock brake load ht 6-1/8 load cap 200 lbs temp rt-40 to +160 f | 4 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 1/2-13 x 1 | caster swivel threaded stem sz 1/2-13 x 1 wheel sz 5 x 1-1/4 wheel mat gray polyurethane bearing ball w/partial thread guard load ht 6-1/8 load cap 315 lbs temp rt-40 to 180 f | 4 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 1/2-13 x 1 | caster swivel threaded stem sz 1/2-13 x 1 wheel sz 3 x 1-1/4 wheel mat blue polyurethane bearing ball w/total lock brake load ht 4-1/8 load cap 250 lbs temp rt-40 to 180 f | 3 |
|
| Endries | WI | Handwheels | 1/2-13 x 1 1/4 | handwheel 2.36dia male cross 1/2-13x1 1/4 | 10 |
| ||
| Endries | WI | Handwheels | 1/4-20 x 1 1/4 | handwheel male 3-lobe 1/4-20x1 1/4 | 10 |
| ||
| Endries | WI | Handwheels | 1/4-20 x 1 1/4 | handwheel 1.58dia male 6-lobe 1/4-20x1 1/4 | 9 |
| ||
| OneMonroe | MN | Latches & Catches | Steel | Zinc/Clear | 1.5 x 1.25 | 1.5x1.25 znc plated latch lh | 14 |
|
| OneMonroe | MN | Latches & Catches | Steel | Zinc/Clear | 1.5 x 1.25 | 1.5x1.25 znc plated latch rh | 14 |
|
| OneMonroe | MN | Handles | 1/4 x 1.25 | 1/4 x 1.25 4130 l-handle rapid r | 5 |
| ||
| Endries | WI | Grommets & Eyelets | Steel | Plain | 11/16 x 1.31 x .125 | ms35489-48 11/16x1.313x .438x1/8 groove grommet black | 9154 |
|
| Endries | WI | Grommets & Eyelets | 13/16 x 1.375 x .500 | 13/16idx1.375od x.500 thk grommet sbr | 693 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Zinc/Black | 1/4-20 x 1 1/2 | 1/4-20x1-1/2 blk znc lvlr 5/8 btl hd | 4000 |
| |
| OneMonroe | MN | Hinges | 1 x 1 1/2 | 1 x 1-1/2 loose joint hinge | 15 |
| ||
| OneMonroe | MN | Hinges | 1 x 1 1/2 | 1 x 1-1/2 loose joint hinge | 90 |
| ||
| OneMonroe | MN | Hinges | 1 1/4 x 1 1/2 | 1-1/4 x 1-1/2 loose joint hinge | 17 |
| ||
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 1/2-13 x 1 1/2 | caster swivel threaded stem sz 1/2-13 x 1-1/2 wheel sz 3 x 1-1/4 wheel mat gray thermoplastic rubber bearing ball load ht 4-1/8 load cap 210 lbs temp rt-40 to 180 f | 2 |
|
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 1/2-13 x 1 1/2 | caster swivel threaded stem stm sz 1/2-13unc x 1-1/2 wheel sz 5 x 1-1/4 wheel mat gray thermoplastic rubber bearing precision w/partial thread guard load ht 6-1/8 load cap 280 lbs temp rt-40 to +180 f | 20 |
|
| OneMonroe | MN | Handles | 1/4 x 1.75 | 1/4 x 1.75 17-4 l-handle rapid r | 3 |
| ||
| OneMonroe | MN | Handles | 1/4 x 1.75 | 1/4 x 1.75 17-4 l-handle rapid r | 3 |
| ||
| OneMonroe | MN | Handles | 1/4 x 1 3/4 | 1/4 x 1-3/4 thandle w/lanyard | 100 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 49 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 4 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 148 |
| ||
| OneMonroe | MN | Hinges | 1 1/4 x 2 | 1-1/4 x 2 loose joint hinge | 144 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 52 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 132 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 41 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 | 1-1/2 x 2 loose joint hinge | 29 |
| ||
| OneMonroe | NC | Hinges | 1.965 x 2.245 x 23.18 | 901 1.965x2.245x23.18 hinge | 1 |
| ||
| OneMonroe | MN | Knobs & Star Grips | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/2-13 x 2.36 | ss 4 prong knob 1/2-13 x 2.36 | 4 |
| |
| Endries | WI | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 1/8 x 2 1/2 | 1/8x2-1/2 neoprene gasket strip per 3302 (inch) | 6000 |
|
| OneMonroe | MN | Hinges | 1 1/2 x 2 1/2 | 1-1/2 x 2-1/2 loose joint hinge | 50 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 1/2 | 1-1/2 x 2-1/2 loose joint hinge | 12 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 1/2 | 1-1/2 x 2-1/2 loose joint hinge | 33 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/2 x 2 3/4 | caster swivel stainless steel wheel 4 x 1-1/4 red polyurethane bearing ball stem 1/2 x 2-3/4 threaded total lock brake | 28 |
| |
| OneMonroe | MN | Knobs & Star Grips | 1/4-20 x 2.75 | 1.75 pp 1/4-20 x 2.75 knob | 55 |
| ||
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 1/2-13 x 2 13/16 | caster swivel threaded stem sz 1/2-13 x 2-13/16 wheel sz 4 x 1-1/4 wheel mat gray thermoplastic rubber bearing ball w/partial thread guard load ht 5-1/8 load cap 260 lbs temp rt-40 to 180 f | 8 |
|
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 1/2-13 x 2 13/16 | caster swivel threaded stem stm sz 1/2-13unc x 2-13/16 wheel sz 5 x 1-1/4 wheel mat gray thermoplastic rubber bearing precision w/full thread guard load ht 6-1/8 load cap 280 lbs temp rt-40 to +180 f | 16 |
|
| Endries | WI | Storage Bins | 16.81 x 29.98 x 13.05 6 | 14047 16.81x29.98x13.05 66qt polypropylene storage bin with lid white | 18 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | 1 3/4 x 3 | caster swivel plate wheel size 6 x 1-1/4 wheel material rubber on plypropylene(grey) delrin bearing top[ plate 2-/8 x 3-5/8 bolthole pattern 1-3/4 x 3 load height 7-1/4 load capacity 300 lbs. | 8 |
| |
| OneMonroe | NC | Protective Caps & Plugs | Plastic | Plain | 1 3/4 x 3 | ( directional) (steer) swivel plate wheel size 5 x 1-1/4 material thermoplastic rubber precision ball bearing load height 5-7/16 bolt hole pattern 1-3/4 x 3 top plate size 3-5/8 x 2-1/2 load capacity 190 lbs temp rating-45f to +180f. | 42 |
|
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 1 x 3 | 1 3-600# 316/graph cgi w/316 inner ring spiral wound gasket | 109 |
| |
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 1 1/2 x 3 | 1-1/2 3-600# 316/xhr cgi w/316 inner ring spiral wound gasket domestic | 1 |
| |
| YANKEE | NH | Hook & Loop Products (Velcro, Teccro, etc.) | 1 x 3 | velcro 1 wide x 3 long hook & loop super adhesive strip | 504 |
| ||
| OneMonroe | MN | Handles | 1/4 x 3 | double-acting rhandle 1/4x3 | 52 |
| ||
| OneMonroe | MN | Protective Caps & Plugs | Rubber, Buna-N, Neoprene etc. | Plain | 10 x 3 | wheel sz 10 x 3 mat rubber on cast iron bearing precision tapered roller bearing bore 1 bore less bearing 1.98 hub length 3-1/2 load cap 1000 lbs temp rt-40 to +180 f | 12 |
|
| Jay-Cee | MI | Hinges | Steel | Zinc/Yellow | 1/4 x 3 1/4 | round hinge pins w/ chamfer & zn/yel Cr3+ 96hr to white | inquire |
|
| OneMonroe | MN | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4 x 3.25 | 1/4 x 3.25 303 ss t-handle rapid | 188 |
| |
| OneMonroe | MN | Storage Bins | 18 x 36 | 18 x 36 wall mount lewis bins | 2 |
| ||
| OneMonroe | NC | Storage Bins | Plastic | Plain | 10 7/8 x 5 | plastic bin box yellow 10 7/8in x 5 | 6 |
|
| Jackson | MS | Nails | 1/4 x 6 | nail bright spike (60d) 50lb ctn. weighs/ea approx 13/pound or 650 per box head od .531 #2 wire guage | 3 |
| ||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4 x 72.000 | hinge pin 1/4 dia x 72.000 s/s | 10 |
| |
| OneMonroe | NC | Hinges | 1.5 x 9 | hinge 1.5x9 slots dfar | 4 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 1 x 9 | 1 9-1500# 316/graph cgi w/316 inner ring spiral wound gasket | 78 |
| |
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 14 x 600 | 14 600# 304/graph cgi w/316 inner/outer rings spiral wound gasket | 3 |
| |
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | 13/16 x 10 | 13/16x10 pregalv unistrut slotted 14 gauge ps 500 eh 10 pg | 25 |
|
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | 1 5/8 x 10 | 1 5/8x10 green slotted unistrut | 11 |
| ||
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1 5/8 x 10 | 1 5/8x10 slotted unistrut 12 gauge 18-8 304 | 3 |
| |
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | 1 5/8 x 10 | 1 5/8x10 pregalv slotted unistrut12 guage | 49 |
|
| OneMonroe | MN | Storage Bins | 10.875 x 11 x 5 | 10.875 x 11 x 5 hang and stack storage bin | 35 |
| ||
| OneMonroe | NC | Strut Systems (Channels, Clamps, Hangers, etc.) | 316, 317, A4 Stainless | 1/4 x 120 | 3 1/4 x 120 12 ga back/back channel shrt slot 316 st | 1 |
| |
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 12 x 150 | 12 150# 1/8 neoprene full face gasket | 2 |
|
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 1/2 x 150 | 1/2 150# 1/8 316 corrugated metal/graphite faced ring gasket | 2 |
| |
| SunPack | FL | Gaskets | 1/2 x 150 | 1/2 150# 304/graph cg spiral wound gasket | 196 |
| ||
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/2 x 150 | 1-1/2 150# a20/ptfe cgi w/a20 inner ring spiral wound gasket | 1 |
| |
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 18 x 150 | 18 150# 1/8 red rubber full face gasket | 19 |
|
| Endries | WI | Handwheels | 1/2-13 | handwheel female 3-lobe 1/2-13 | 5 |
| ||
| Endries | WI | Nails | 1 1/2 | 1-1/2 smooth roofing nail (1lb/bx) | 129 |
| ||
| Endries | WI | Handwheels | 1/2-13 | handwheel thru tapped 3-lobe 1/2-13 | 10 |
| ||
| Endries | WI | Handwheels | 1/2-13 | handwheel 2.36dia thru tapped 6-lobe 1/2-13 | 15 |
| ||
| Endries | WI | Brackets & Supports | Steel | 1/2 | 1/2 wide spring clip vanity bracket-steel | 5581 |
| |
| Endries | WI | Protective Caps & Plugs | Plastic | 1 3/8 | 1-3/8 inch extl cap 1. 59 od .56 deep polyethylene red | 400 |
| |
| Endries | WI | Protective Caps & Plugs | Grade 2H | Zinc/Clear | 1/2 | 1/2 hole plug 8 prong hd 21/32x9/32h stl ni rohs smith 653 concord 790-3008 | 20 |
|
| Endries | WI | Handwheels | 1/2-13 | handwheel 1.97dia female 6-lobe 1/2-13 | 15 |
| ||
| Endries | WI | Latches & Catches | Steel | Black Oxide | 11 | 117-3004-5614 (oe) black acetal male relatch grommet | 450 |
|
| Endries | WI | Handwheels | 1/4-20 | handwheel thru tapped 3-lobe 1/4-20 | 8 |
| ||
| Endries | WI | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 13 | 13586-00036 .156x.630x .011 18-8 304 steel compression spring lee | 2045 |
| |
| Hayes | CA | Handles | 1/4 | 1/4 t handle set | 1 |
| ||
| Hayes | CA | Handles | 1/4 | 1/4 sq. nut driver handle | 1 |
| ||
| Global | CA | Protective Caps & Plugs | Plastic | 14 | cep- caplugs CEP | 34 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | 1611-21 | nas1611-213a | 7 |
| ||
| Endries | WI | Protective Caps & Plugs | 048a 1.291x1.625 low-density polyethylene tapered plug blue | 300 |
| |||
| Endries | WI | Protective Caps & Plugs | Black Oxide | sqr 1-3/4 14-20 low-density polyethylene ribbed cap black (caplug) | 124 |
| ||
| SJS Prod | CA | Gaskets | Steel | Zinc/Clear | 19.70 | fabric gasket rct 19.70 rohs | 2000 |
|
| Endries | WI | Protective Caps & Plugs | Black Oxide | 1 1/2 | plug150 1-1/2 mpt black polypropylene hex head pipe plug | 100 |
| |
| Endries | WI | Handles | Painted | 1 | 7546 1 gallon unlined paint can lid no handle | 68 |
| |
| Endries | WI | Protective Caps & Plugs | Plastic | Plain | 1/2 | p-48b 1/2 npt red plastic plug (caplugs) | 13388 |
|
| Endries | WI | Springs (Compression) | 1 1/4 x 5 1/2 | 9-2022-26 1-1/4x5-1/2 heavy duty die spring red | 12 |
| ||
| Endries | WI | Springs (Compression) | 1 1/4 x 10 | 9-2040-11 1-1/4x10in light duty die spring green | 8 |
| ||
| Endries | WI | Springs (Extension) | 1 1/2 x 5 | 9-2420-36 1-1/2x5in extra heavy duty die spring yellow | 17 |
| ||
| Endries | WI | Hinges | 13 | 1391431-hinge gasket | 16 |
| ||
| Endries | WI | Springs (Compression) | 1 1/4 x 1 3/4 | 9-2007-11 1-1/4x1-3/4 light duty die spring green | 5 |
| ||
| Endries | WI | Handles | Aluminum | 10-24 | 4 inch handle contempory 10-24 thread alum | 179 |
| |
| Endries | WI | Springs (Compression) | 1 1/2 x 3 1/2 | 9-2414-11 1-1/2x3-1/2 light duty die spring green | 4 |
| ||
| Endries | WI | Springs (Compression) | 1/2 x 3 1/2 | 9-0814-11 1/2x3-1/2 light duty die spring green | 32 |
| ||
| Endries | WI | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1.46 x 2.00 | 1.46 od 2.00 l. comp.spring ss | 105 |
| |
| Endries | WI | Handles | Brass | 1/4 | 1/4 rub s93 brass ball valve w/locking handle | 6 |
| |
| Endries | WI | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 11 | le 026c 11 s .25x.026x 3in stainless steel extension spring (lee spring only) | 50 |
| |
| Endries | WI | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 1 | grommet 1 1/4 id black buna-n rohs | 100 |
|
| OneMonroe | NC | Hinges | 17.57 | cover hinge 17.57 | 68 |
| ||
| OneMonroe | NC | Hinges | 17.57 | cover hinge 17.57 | 53 |
| ||
| OneMonroe | NC | Staples | 1/4 | 4804pg galu staple 1/4 crown x 1/2 long 18 ga (5 000 per box) | 2 |
| ||
| OneMonroe | NC | Staples | 1/4 | 4804pg galu staple 1/4 crown x 1/2 long 18 ga (5 000 per box) | 3 |
| ||
| OneMonroe | NC | Staples | Galvanized | 1/4 | 4806pg 1/4 crown 3/4 l 18ga galv narrow crown soffit staple (5 000 per box) | 4 |
| |
| OneMonroe | NC | Staples | Galvanized | 1 1/4 | 4810pg 1/4 crown 1-1/4 l 18ga galv nrrwcrwn soffitstaple | 15000 |
| |
| OneMonroe | NC | Staples | Galvanized | 1 1/4 | 4810pg 1/4 crown 1-1/4 l 18ga galv nrrwcrwn soffitstaple | 60000 |
| |
| OneMonroe | NC | Staples | Galvanized | 1 1/2 | 4812pg 1/4 crown 1-1/2 l 18ga galv soffit staple 5000/bx | 58 |
| |
| OneMonroe | NC | Staples | Galvanized | 1 1/2 | 4812pg 1/4 crown 1-1/2 l 18ga galv soffit staple 5000/bx | 1 |
| |
| OneMonroe | NC | Handles | 114 | 114 center control w/oride inside handle made in | 7 |
| ||
| OneMonroe | NC | Hinges | 1 1/8 | 1-1/8 offset cam li ft hinge | 7 |
| ||
| OneMonroe | NC | Brackets & Supports | 12 | 12 bracket | 28 |
| ||
| OneMonroe | NC | Vibration/Shock Absorbing Mounts, Rubber Bumpers | 1 1/16 | bumper type rotating diameter 5 id hole 1-1/16 | 12 |
| ||
| OneMonroe | NC | Vibration/Shock Absorbing Mounts, Rubber Bumpers | 1 | bumper corner dim 3 x 1-1/8 long x 1-5/16 thick at corner to 1 on ends mounting holes 2 (3/16 ) ea side. with rounded ends | 18 |
| ||
| OneMonroe | NC | Handles | 1 3/8 | offset handle with 1-3/8 shank | 17 |
| ||
| OneMonroe | NC | Hinges | 1 1/8 | 1-1/8 offset adjustable spring hinge | 2 |
| ||
| OneMonroe | NC | Hinges | 1 | 1 pair non-mortise hinge | 16 |
| ||
| OneMonroe | NC | Brackets & Supports | 1 | d ring 1 50 degree angle with a style bracket | 30 |
| ||
| OneMonroe | NC | Gaskets | 12 | gasket for 626 series with 12 holes | 8 |
| ||
| OneMonroe | NC | Gas Springs, Gas Struts (Lift-O-Mat etc.) | 10-23 | clevis fork for size 10-23 camloc gas springs | 18 |
| ||
| Jackson | MS | Grease Fittings | 1/4 | pipe thread 67 1/2 degree grease fitting | 105 |
| ||
| Cal Fastenrs | CA | Expansion Plugs | Steel | Zinc/Clear | 1/2 | 1/2 expansion plug .032 thick steel trivalent zinc hp500s32 trivalent zinc i & 4 hour bake no drawing | 8,257 |
|
| OneMonroe | NC | Brackets & Supports | 18 | 18 double bracket | 28 |
| ||
| NAPPCO | TX | Handles | 1/4 | 1/4 extnotched spannerdriverhandle one | 1 |
| ||
| Jackson | MS | Nails | Steel | Galvanized | 15 | gaugex2 da-finish nail (4 000 per box) | 16000 |
|
| Jackson | MS | Nails | 18 | gaugex1-1/4 finish brad nail (5 000 per box) | 15000 |
| ||
| Jackson | MS | Nails | Plastic | Plain | 1 3/4 | 1-3/4 cap-plastic roofing nail (2 000 per box) | 6000 |
|
| Jackson | MS | Nails | 12 | d coated sinker nail (50# carton) | 6 |
| ||
| Jackson | MS | Nails | 1 1/4 | roof tacks nails-special order | 6 |
| ||
| SunPack | FL | Gaskets | 1 150#1/16 | teadit 1001 non-asbestos full face gasket | 27 |
| ||
| SunPack | FL | Gaskets | 1/16 | garlock ifg-5500 compressed sheet | 110,066 |
| ||
| SunPack | FL | Gaskets | 1/16 | garlock 9800 high-temp compressed sheet | 32,400 |
| ||
| SunPack | FL | Gaskets | 1/8 | klinger psm-as graphite sheet mxm (39.5x39.5) mxm (39.5x39.5) | 11,389 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 10 | 10 300# 316/graph cg spiral wound gasket domestic | 16 |
| |
| OneMonroe | NC | Handles | 1 1/8 | 1-1/8 quick change mophandle | 9 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 16 | 16 300# 316/graph cgi w/316 inner/outer rings spiral wound gasket | 13 |
| |
| Century | FL | Protective Caps & Plugs | 17 | caplug ww-17 pe-ld01 yel002yellow tapered caps and plugs with wide thick flanges | 159 |
| ||
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | 1/4-20 | 1/4-20 nc unistrut nut | 313 |
| ||
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 1/2 | 1/2x1-5/8 unistrut square washer | 2249 |
|
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1-1/2 150# 304/ptfe cgi w/304 inner ring spiral wound gasket | 37 |
| ||
| SunPack | FL | Gaskets | 1/8 | 24 300# 1/8 viton full face gasket | 1 |
| ||
| ACCURATE | IL | Grease Fittings | 1/8 | 1/8 relief fitting 1-5 psi (alemite 47200) | 19 |
| ||
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 1/8 | 8 150# 1/8 red rubber ring gasket domestic | 17 |
|
| Jay-Cee | MI | Gaskets | 180 | sleevinh gasket for 302e/rac | 1 |
| ||
| Jay-Cee | MI | Grommets & Eyelets | Brass | Nickel Plated | #1 | grommet brass | inquire |
|
| OneMonroe | MN | Latches & Catches | 102 | key 102 kason lock cylinder | 5 |
| ||
| OneMonroe | MN | Handles | 1/4-20 | 1/4-20 adj handle-black | 6 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Nickel Plated | 1.25 | leveler1.25 in base3/8-16x2 nkl | 50 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 1/4-20 | leveling mount 1/4-20 & 1 base | 150 |
| ||
| OneMonroe | MN | Snap Fasteners (Snap Studs, Snap Caps, etc.) | 1/4-20 | snap lok leveler 1/4-20 stud | 1 |
| ||
| OneMonroe | MN | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4-20 | 1/4-20 ss adjust handle-orange | 85 |
| |
| OneMonroe | MN | Hinges | 1 3/4 | hinge with weld 1-3/4 exposed pin | 122 |
| ||
| OneMonroe | MN | Knobs & Star Grips | 1/2 | evl 6-lobe knob 1/2 thru | 19 |
| ||
| OneMonroe | MN | Knobs & Star Grips | 1/4 | knurled knob 1/4 tapped | 149 |
| ||
| OneMonroe | MN | Knobs & Star Grips | 1/4-20 | star knob 1 1/4 1/4-20 tapped | 165 |
| ||
| OneMonroe | MN | Knobs & Star Grips | Steel | 1/2-13 | star knob steel hub 1/2-13 tap | 2 |
| |
| OneMonroe | MN | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 13.79 | round pull handle ss 13.79 | 8 |
| |
| OneMonroe | MN | Knobs & Star Grips | Aluminum | 1/4-20 | alum domed knurld knobs 1/4-20 | 23 |
| |
| OneMonroe | MN | Knobs & Star Grips | 1/4-20 | three lobe knob 1/4-20 | 9 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Nylon (Polyamide) | 1/2-13 | 1/2-13 nylon base swivel leveling mount | 400 |
| |
| OneMonroe | MN | Knobs & Star Grips | Nylon (Polyamide) | Plain | 1/4-20 | 1/4-20 black nylon wing thumb knob | 1450 |
|
| OneMonroe | MN | Nails | 1 | 1 1/4 x 23ga micro pin nail 10 000 | 5 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 1 1/4-1 5/16 | caster swivel round expandable stem sz 1-1/4-1-5/16 wheel sz 5 x 1-1/4 wheel mat gray polyurethane bearing ball w/partial thread guard load ht 6-1/8 load cap 315 lbs temp rt-40 to 180 f | 1 |
|
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 1-1 1/16 | caster swivel expanding adapter stem stm sz 1-1-1/16 wheel sz 6 x 1-1/4 wheel mat gray thermoplastic rubber bearing precision w/full thread guard load ht 7-1/8 load cap 300 lbs temp rt-40 to +180 f | 4 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
