3/4 C-Clips
C-Clips, or Type-C Retaining Rings, are external retaining rings whose purpose is to stop the movement of an assembly along a shaft. They are installed radially into a machined groove in the shaft, usually just by pressing, so installation does not require special equipment. Their name comes from the fact that the appearance of the E-Clip resembles the written letter "C".
7 results, (click on any line for more information)
Buy C-Clips from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
FACCA | Ont | External Type C Retaining Ring (C-Clip) | Steel | Zinc/Clear | 3/4 x 2.25 | qr hitch pin without shoulder with round ring & spring load ball 3/4 dia x 2.25 grip steel c1144 stress relv zinc plated | 60 |
|
Century | FL | External Type C Retaining Ring (C-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | ms16632-4075 | 200 |
|
Jackson | MS | External Type C Retaining Ring (C-Clip) | Steel | Plain | 3/4 | c-075 c-clip spring crescent ring | 170 |
|
QFC | TX | External Type C Retaining Ring (C-Clip) | Steel | Plain | 3/4 | 3/4 step clip 1/4 x 1 1/2 x 1 1/2 x 2 | 295 |
|
IPC | VA | External Type C Retaining Ring (C-Clip) | Steel | Phosphate | 3/4 | 3/4 klip ring phos | 16,200 |
|
Cal Fastenrs | CA | External Type C Retaining Ring (C-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | 3/4 external retaining ring stainless steel rotor # c75-ss | 5,000 |
|
Mansco | MI | External Type C Retaining Ring (C-Clip) | Steel | Zinc/Clear | 3/4 wide x 3.750 oal x 14ga thk booth back attachment clip triv znc-per print rotor clip | 21136 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.