FCH Member Advertisement
FCH News
3 1/2 External Retaining Rings-Type SH
Shaft Rings, or Type SH Retaining Rings are thin, circular rings that installed axially into a machined groove in a shaft to stop the movement of an assembly along that shaft. That assembly could be a gear or a wheel. Assembly requires the use of needle nose pliers which grip small locating holes to expand the shaft ring so it can be slid along the shaft before being released ito the groove.
6 results, (click on any line for more information)
| Buy External Retaining Rings-Type SH from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| YANKEE | NH | External Type SH Retaining Ring | Steel | Plain | 3 1/2 | 3-1/2 retaining ring-external carbon steel | 1 |
|
| Endries | WI | External Type SH Retaining Ring | Steel | Plain | 3 1/2 | 3-1/2 ext retaining ring steel | 158 |
|
| SRF | AL | External Type SH Retaining Ring | Steel | Plain | 3 1/2 | external retaining ring | - |
|
| Delta | TX | External Type SH Retaining Ring | Steel | Plain | 3 1/2 | snap ring cs 3 1/2 external | 59 |
|
| IPC | VA | External Type SH Retaining Ring | Steel | Phosphate | 3 1/2 | 3 1/2 external retaining ring phosphate | 25 |
|
| Fastener | OH | External Type SH Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3 1/2 | ext retaining ring 3-1/2 18-8 304 | 128 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
