3/4 Drive Pin Anchor (Ramset etc.)

Drive Pin Anchors are installed in pre-drilled holes with either a hammer strike or powder actuated force that drives a nail into the anchoring material, expanding the anchor to form a tight fit. When the pin is flush, the anchor is set.

15 results, (click on any line for more information)

SupplierLocTypeMaterialFinishSizeDescriptionQty
FastWareSaskDrive Pin Anchor (Ramset etc.)SteelZinc/Yellow3/4 x 3.13oal c1045 headless cylinder pin w/2 9/64 holes96
R&SORDrive Pin Anchor (Ramset etc.)SteelPlain3/4 x 53/4 x 5 center pin drive anchor40
FastWareSaskDrive Pin Anchor (Ramset etc.)SteelZinc/Yellow3/4 x 15 1/2headless cylinder pin 2 tl astm a108 1018 rev a1,251
KBSTNDrive Pin Anchor (Ramset etc.)SteelBlack Oxide3/43/4 black pin fuel/pak ramset trakfast22,000
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain3/4ramset pins .300hd. w/7/8 washer 3/4 washer 3/4 AA1506SD2400
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain3/4RAMSET PINS .300 HD. TOP-HAT 3/4 AA19063890
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain3/4ramset pins trakfast 3/4 black21
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelZinc/Clearramset pins trakfast 3/4 breakaway strip1
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain3/4ramset pins w/t3 fuel 3/4 black72
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain3/4RAMSET PINS .300 HD. STEP shank 3/4 AA1506S6822
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain3/4drive pins .300 hd .145 shank2000
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain2 3/4drive pins 8mm hd. .145 shank100
UNITED FASTENERCADrive Pin Anchor (Ramset etc.)SteelPlain1 3/4drive pins 8mm hd. .145 shank800
BRIGHBESTILDrive Pin Anchor (Ramset etc.)SteelZinc/Black3/41506 3/4 lenght ramset drive pins zb9600
BRIGHBESTILDrive Pin Anchor (Ramset etc.)SteelZinc/Black3/41506sd 3/4 lenght ramset drive pins zb3000

Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.