FCH Member Advertisement
FCH News
Power Tool Accessories
43,304 Power Tool Accessories, showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | sait-lok-r mediume maroon | inquire |
| |||||
| Century | FL | bosch 3842146822 t-bolt m8 x 19mm new bosch #8981021343 | 100 |
| ||||
| Century | FL | Machine Taps | Steel | 1/2 | 3m 1126 1/2 w x 36yrds copper foil tap 3m 1126 1/2 w x 36yrds copper foil tape 76555a642 upc 0-00-51128-55902-4 | 12 |
| |
| Century | FL | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 1/2 x 24 | 14-1368 1/2 x 24 sand belt rev 3 14-1368 1/2 x 24 sand belt resin bond alum oxide bias joint or butt joint 80 grit rev 3 | 8 |
| |
| Jackson | Masonry & Concrete Drill Bits | Steel | M6-1.00 | m6 x 110-160 mm oal sds-plus masonry hammer drill bit | 2 |
| ||
| OneMonroe | NC | Drilling Sets | Steel | holds a bit 9pc set | 9 |
| ||
| OneMonroe | NC | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 7 | 7 36# avos speed-lok disc | 10 |
| |
| OneMonroe | NC | Hole Saws | Steel | 2 1/4 | 2-1/4 diamond hole saw | 4 |
| |
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 3/4 x 8 x 12 | drill bit 3/4 x 8 x 12 masonry 1/ | 2 |
| |
| OneMonroe | MN | Metal Drill Bits | Steel | 3/8 x 10 x 12 | drill bit 3/8 x 10 x 12 speedhamme | 1 |
| |
| Jackson | MS | Reamer Bits | 11/16 x 11 3/4 | 11/16x11-3/4 oal bridge reamer morse taper#3 straight flute 7-1/8 useable flute length right hand cut dom.. 4200 series | 1 |
| ||
| OneMonroe | Metal Drill Bits | Steel | 0.1065 | #36 stubby drill bit | 24 |
| ||
| Jackson | MS | Machine Taps | 1/2-20 | nf plug tap | 4 |
| ||
| OneMonroe | MN | Wood Drill Bits | Steel | 3/4 | spade bit 3/4 10/box | 10 |
| |
| OneMonroe | MN | Band Saw Blades | Steel | master cobalt portaband blade 44 7/8x1/2x.020 14/18tth-3pk | 13 |
| ||
| OneMonroe | MN | Saw Blades | Steel | 9 x .05 x 6 | 9 x .05 x 6 tpi bi-metal saw blade | 1 |
| |
| OneMonroe | MN | Wire Wheels | Steel | 1/2 | 1/2 coil spring brush-.014 cs wire 1/4 shank | 7 |
| |
| Jackson | MS | Metal Drill Bits | 1 3/8 x 14 1/2 | 1-3/8 x 14-1/2 drill bit taper shank morse taper #4 8-7/8 useable length domestic series 1400 | 2 |
| ||
| Jackson | MS | Machine Dies | 1 1/8-12 | 1 1/8-12 nf hexagon threading die | 2 |
| ||
| Jackson | MS | Machine Dies | M16 x 2.00 | m16 x 2.00 coarse pitch hexagon threading die | 1 |
| ||
| Jackson | MS | Machine Dies | M22 x 2.50 | m22 x 2.50 die hexagon threading dies | 1 |
| ||
| Jackson | MS | Screwdriving Insert Bits & Power Bits | Steel | Plain | #10 | spanner bit | 6 |
|
| Jackson | MS | Screwdriving Insert Bits & Power Bits | Steel | Plain | #1 x 1 | phillips insert bit | 134 |
|
| Jackson | MS | Screwdriving Insert Bits & Power Bits | Steel | Plain | #14 | spanner bit | 6 |
|
| Jackson | MS | Metal Drill Bits | 1/4 x 8 | w/6 flute drill bit extra length 118 degree point hss | 1 |
| ||
| Jackson | MS | Metal Drill Bits | 3/16 | l.h. drill bit jobber length 135 degree point hss | 36 |
| ||
| Jackson | MS | Metal Drill Bits | 13/64 | l.h. drill bit jobber length 135 degree point hss | 12 |
| ||
| Jackson | MS | Metal Drill Bits | 17/64 x 6 | oal extra length drill bit 135 degree point hss dom.. | 10 |
| ||
| OneMonroe | NC | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | Zinc/Clear | 1/2 x 4 1/2 | rig swivel-smooth stem (ladder) accepts wheel size 3 stem size 1/2 x 4-1/2 rig mat steel finish zinc load cap 75 lbs | 42 |
|
| OneMonroe | NC | Hole Saws | Steel | 3/16 x 3/16 | 1 3/16 x 3/16 carbide tipped hole saw champion | 2 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | (k) 135 deg. split pt jobber drill | 11 |
| ||
| OneMonroe | NC | Battery Packs | Steel | battery hold down outer | 10 |
| ||
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee m18 18-volt lithium-ion cordless jobsite fan (tool-only) | 1 |
| |
| RePneu To | MI | Annular Cutters | Steel | 1/2 x 1 | 1/2 x 1 12 000-series annular cutter | 4 |
| |
| RePneu To | MI | Battery Packs | Steel | M18 | milwaukee 2729-20 m18 fuel cordless lithium-ion deep cut band saw (tool only) | 2 |
| |
| RePneu To | MI | Reciprocating Saw Blades | Steel | M18 | m18 fuel sawzall bare tool | 8 |
| |
| RePneu To | MI | Band Saw Blades | Steel | M18 | milwaukee 2929-20 m18 fuel deep cut band saw | 2 |
| |
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | 3/16 | 3/16 ball style insert bit | 10 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 3/16 | 3/16 hex bit tip | 30 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 3/16 | 3/16 drill hvy dty 135o split pt. left | 12 |
| |
| OneMonroe | NC | Milling Cutters (End Mills, Face Mills etc.) | Steel | 3/16 | 3/16 h.s. multi flute d.e. end mill | 1 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 1/4 | 1/4 radius rounding over bit | 5 |
| |
| RePneu To | MI | Band Saw Blades | Steel | 12/14 | milwaukee 44-7/8 bandsaw blades extreme thin metal deep cut 12/14 | 13 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 0.166 | #19 x 6 a/c ext bit. 135 deg. splt pt. | 42 |
| |
| OneMonroe | NC | Metal Drill Bits | Titanium | 0.166 | #19 titanium nitride coated drills | 10 |
| |
| RePneu To | MI | Machine Dies | Steel | 6 | exact 6 die | 2 |
| |
| RePneu To | MI | Machine Taps | Steel | #6-32 | #6-32 hss sp plug tap type-20 bright finish | 11 |
| |
| RePneu To | MI | Machine Taps | Steel | #8-32 | #8-32 hss sp plug tap type-20 bright finish | 12 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 2 | diablo pc arbor hex 1/2 with hss g pilot drill and 2 adapter nuts | 1 |
| |
| Jackson | MS | Machine Taps | M6-1.00 | pitch plug tap | 2 |
| ||
| RePneu To | MI | Reciprocating Saw Blades | Steel | 6 | db 6 tct medium metal amped recip blade | 9 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 1 3/8 | db step bit 1-3/8 in. 15 steps | 5 |
| |
| RePneu To | MI | Hole Saws | Steel | 7/8 | 7/8 t.c.t. (1/2 deep) carbide hole saw | 10 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 7/32 | 7/32 vip (step) jobber-m2 hss blk&gld | 22 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | M35 | 13 step tiain coated 4 flute m35 cobalt step bit | 2 |
| |
| OneMonroe | NC | Milling Cutters (End Mills, Face Mills etc.) | Steel | 1/4 x 3/8 | 1/4 x 3/8 high speed double end 4 flute end mill | 2 |
| |
| OneMonroe | NC | Milling Cutters (End Mills, Face Mills etc.) | Steel | 1/4 | 1/4 h.s. 2 flute d.e. end mill | 1 |
| |
| OneMonroe | NC | Metal Drill Bits | Titanium | 0.147 | #26 titanium nitride coated drills | 5 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 0.136 | #29 h.s. drill bit-jobber kobalt | 13 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 19/64 | 19/64 h.s. drill bit jobber metorite | 19 |
| |
| OneMonroe | NC | Machine Taps | Steel | 5/16-24 | 5/16-24 bottom tap | 13 |
| |
| OneMonroe | NC | Machine Taps | Steel | 5/16-24 | 5/16-24 plug tap | 13 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | M42 | 1/4 aircraft 6 135 split point solid construction m42 cobalt | 12 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 5/16 | 5/16 jobber drill le ft hand | 4 |
| |
| OneMonroe | NC | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/16 | 5/16 h.s. multi flute d.e. end mill | 3 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 21/64 | 21/64 h.s. drill bit jobber metorite | 9 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 11/32 | 11/32 190ag magnum super premium jobber drill bit | 6 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | 5/16 | 5/16 190ag magnum super premium jobber drill bit | 24 |
| |
| Jackson | MS | Masonry & Concrete Drill Bits | 11/16 x 8 | oal 6 useable sds-plus masonry hammer drill bit 160 pt | 3 |
| ||
| RePneu To | MI | Deburring Bits | Steel | 1/4 | 1/4 diameter 5/8 cut length. double cut cylinder radius end deburrer sc-1. 1/4 shank | 3 |
| |
| OneMonroe | NC | Hole Saws | Steel | 3 1/2 | 3-1/2 diamond hole saw | 2 |
| |
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | T30 x 1 1/4 | torx insert bit t-30 x 1 1/4 hex | 7 |
| |
| OneMonroe | NC | Nut Driving Bits, Nutsetters | Steel | 7/16 x 1 3/4 | magnetic nutsetter 7/16 x 1 3/4 | 16 |
| |
| OneMonroe | MN | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 045 x 7/8 | 4 1/2 x. 045 x 7/8 srt46 cut off wheel | 3 |
| |
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 3/8 x 12 | 3/8 x 12in (oa) sds plus wedge bit | 2 |
| |
| OneMonroe | MN | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 4 1/2 x .040 x 7/8 | 4-1/2 x .040 x 7/8 cut-off wheel | 30 |
| |
| OneMonroe | NC | Reciprocating Saw Blades | Steel | 11 | makita recipro saw 11 amp var. spd. tool-less blade change and shoe adjustment case | 2 |
| |
| OneMonroe | Machine Taps | Steel | 1/4-28 | 1/4-28 plug tap | 2 |
| ||
| OneMonroe | NC | Reciprocating Saw Blades | Steel | 9 | makita 9 demolition recipro saw blade 8/10tpi 3/pk sold per each | 3 |
| |
| OneMonroe | NC | makita 18v lxt lithium-ion cordless 1/2 hammer driver drill (tool only) | 1 |
| ||||
| OneMonroe | NC | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 4 1/2 | makita 4-1/2 multi-disc hubbed 80 grit angled type-29 10/pk sold per each | 9 |
| |
| OneMonroe | NC | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 14 x 3/32 x 1 | 14 x 3/32 x 1 arbor metal cut off wheel | 17 |
| |
| OneMonroe | NC | 5inx 5/8-11 back pad for coating remove | 1 |
| ||||
| OneMonroe | NC | Collets | Steel | Plain | 1/4 | chicago pneumatic cp875 90 degree angle die grinder 1/4 collet 22 500 rpm | 2 |
|
| OneMonroe | NC | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 2 | 2-1-112 cutting tip | 8 |
| |
| OneMonroe | NC | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 3 | 3m 051131-01396 greenrolox disc 50 grit | 50 |
| |
| OneMonroe | NC | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 2 | size 2 general cutting tip acetyl/o2 harris 6290 | 19 |
| |
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | 3/8 | hex bit socket 3/8 drive 5/16 hex | 10 |
| |
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 5/16 x 4 x 6 | drill bit 5/16 x 4 x 6 masonry | 19 |
| |
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 5/16 x 4 x 6 | drill bit 5/16 x 4 x 6 masonry | 1 |
| |
| Jackson | MS | Metal Drill Bits | Class 6.8 | 6.8 mm drill bit jobber 118 point hss black & gold | 7 |
| ||
| Jackson | MS | Machine Taps | M10-1.25 | pitch fine plug tap | 6 |
| ||
| OneMonroe | NC | Metal Drill Bits | Steel | (j) 135 deg. split pt jobber drill | 13 |
| ||
| Jackson | MS | Metal Drill Bits | 1/2 x 8 | w/6 flute extra length drill bit 118 degree point hss | 1 |
| ||
| Jackson | MS | Metal Drill Bits | 1/2 x 12 | ... drill bit jobber length 118 degree point hss | 6 |
| ||
| Jackson | MS | Metal Drill Bits | 7/64 | cobalt drill bit jobber gold 135 point usa | 8 |
| ||
| Jackson | MS | Metal Drill Bits | 5/16 | cobalt drill bit jobber gold 135 point import | 20 |
| ||
| Jackson | MS | Metal Drill Bits | 5/16 | cobalt drill bit jobber gold 135 point usa | 24 |
| ||
| Jackson | MS | Metal Drill Bits | 21/64 | cobalt drill bit jobber gold 135 point usa | 24 |
| ||
| Jackson | MS | Metal Drill Bits | 1 1/8 x 1/2 | shank bit reduced shank black/gold 118 | 11 |
| ||
| OneMonroe | NC | Machine Taps | Steel | 12-28 | 12-28 taper tap | 12 |
| |
| Jackson | MS | Metal Drill Bits | 1/2 | stubby bit 135 split point | 13 |
| ||
| Jackson | MS | Masonry & Concrete Drill Bits | 1/4 x 12 | oal 10 useable sds-plus masonry hammer drill bit 160 pt | 37 |
| ||
| TownCountry | AR | Router Bits | 3/16 | router bit solid carbide single edge spiral upcut 5/8 c.e. 2 oal 1/4 shank | 6 |
| ||
| TownCountry | AR | Router Bits | 3/16 | router bit solid carbide single edge upcut | 2 |
| ||
| TownCountry | AR | Jig Saw Blades | jigsaw blades | 15 |
| |||
| TownCountry | AR | 12 x 1/2 | tape measure 12x1/2 starrett #1-855-68932 | 12 |
| |||
| GOEBEL | TX | Metal Drill Bits | 3.2 x 49 x 13 | mm fully-ground hss-co-two-sided-drill 3.2 mm | 3,500 |
| ||
| Endries | WI | Metal Drill Bits | Steel | 9/32 | 400e118 9/32 heavy duty 135 drill bit bronze and black | 12 |
| |
| Endries | WI | Saw Blades | Steel | 22065 double burr replacement blade (per blade) | 20 |
| ||
| Endries | WI | Machine Taps | Steel | m10x1.5 d6 3fl springfield gun tap | 12 |
| ||
| Endries | WI | Metal Drill Bits | Steel | Black Oxide | 68920 5/16x12 t-168 135deg black high speed steel drill bit | 424 |
| |
| Endries | WI | Metal Drill Bits | Steel | 12516 1/4 | 12516 1/4 190-ag high speed steel 135deg jobber drill bit | 330 |
| |
| Endries | WI | Metal Drill Bits | Steel | 12524 3/8 | 12524 3/8 190-ag high speed steel 135deg jobber drill bit | 182 |
| |
| Endries | WI | Metal Drill Bits | Steel | 12527 27/64 | 12527 27/64 190-ag high speed steel 135deg jobber drill bit | 78 |
| |
| Endries | WI | Machine Taps | Steel | Plain | 1/4-18 | 1/4-18 holo-krome alloy socket pressure plug dry-seal 3/4 taper plain | 500 |
|
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 2 | bit insert 2 square rec 1/4h ex 25/bg | 14 |
| |
| Endries | WI | Impact Socket Drivers | Steel | 1/2 | skt impact 1/2 dr 1/2 6 point double end ep | 12 |
| |
| Endries | WI | Impact Socket Drivers | Steel | 1/2 | skt impact 1/2 dr 18mm 6 point d eep | 12 |
| |
| Endries | WI | Metal Drill Bits | Steel | Black Oxide | f | c18033 letter f 4-1/8 overall length high speed steel 2 flute jobber drill black gold | 852 |
|
| Endries | WI | Impact Socket Drivers | Steel | j7650 3/8 female x 1/2 male impact drive adapter | 24 |
| ||
| Endries | WI | Reciprocating Saw Blades | Steel | 6 x 3/4 x .035 | 400404 6x3/4x.035 14 tpi bi-metal reciprocating saw blade | 139 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 2 | 05523 2 very fine grit roloc disc | 74 |
| |
| Endries | WI | Wire Wheels | Steel | 3 x 7 | 85055 3x7 stainless steel wire wood block welders brush | 6 |
| |
| Endries | WI | Metal Drill Bits | Steel | 03282 crc sp400 corrosion inhibitor | 12 |
| ||
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 3/8 x 21 | a-34469 3/8x21in aluminum oxide 80 grit sanding belt 10 per pack | 5 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 1/4 | t27 drive 1in overall length 6-lobe pin tamperproof insert bit 1/4in hex | 18127 |
| |
| Endries | WI | Metal Drill Bits | Steel | 59250 15/32 | 59250 15/32 magnum heavy duty drill bit 3/8 shank | 12 |
| |
| RePneu To | MI | Saw Blades | Steel | 6 | diablo 6 tct med metal amped 3 pack blade | 1 |
| |
| Hayes | CA | Metal Drill Bits | 11/32 | 11/32 h.s. jobber drill #705 | 5 |
| ||
| RePneu To | MI | Machine Dies | Steel | burndy u36art u compression die 600 kcmil aluminum black 473 | 3 |
| ||
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | #2 | 446-2-acr2-x phillips bit anti cam #2 limited clearance | 20 |
| |
| ASFCORP | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | M14-1.50 | m14-1.5 wheel nut class 10 wss-m21p51-a4 except sealer macdermid zinklad 1000 trivalent chromate passivate silver sp-03173082 a.1 cso 3/9/22 | 4800 |
| ||
| ASFCORP | Machine Taps | Steel | 5/16-18 | 1-14 fin hx jam drl nut sae j995 gr 2 tri zn fe/zn 5ans w/1 drill+tap 5/16-18 hole thru flats | 1750 |
| ||
| Empire | WA | brutelube display | 1 |
| ||||
| Empire | WA | #12-24 | 12-24 speed threader | 1 |
| |||
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 3/16 | 71381 3/16 hex bit socket 3/8 square drive 1.65in overall length | 15 |
| |
| Endries | WI | Masonry & Concrete Drill Bits | Steel | 3/16 x 4 x 6 | 48-20-9006 (3) 3/16 x 4 x 6 hammer drill bit (milwaukee tool only) | 2 |
| |
| Endries | WI | Masonry & Concrete Drill Bits | Steel | 3/16 x 2 x 4 | 48-20-9005 (3) 3/16 x 2 x 4 hammer drill bit (milwaukee tool only) | 2 |
| |
| Endries | WI | Metal Drill Bits | Steel | 7/32 | 05680 7/32 190-ag high speed steel 135deg jobber drill bit | 12 |
| |
| MESAFAST | CA | Screwdriving Insert Bits & Power Bits | Steel | #2 x 1 | #2 x 1 phillips/square insert bit | 15.0 |
| |
| MESAFAST | CA | Screwdriving Insert Bits & Power Bits | Steel | #2 x 2 | #2 x 2 phillips/square powerbit | 15.0 |
| |
| MESAFAST | CA | Machine Taps | Steel | 1/2-13 x 6 | 1/2-13 x 6 hss pulley tap | 2.0 |
| |
| MESAFAST | CA | Metal Drill Bits | `f | letter `f hss jobber length drill black & gold | 24.0 |
| ||
| MESAFAST | CA | Machine Taps | #10-32 | 10-32 hss 2-flute spiral point plug tap nitro | 8.0 |
| ||
| MESAFAST | CA | Metal Drill Bits | 9/64 | hss (1/4 af) hex shank hss drill 135 degr split point | 10.0 |
| ||
| MESAFAST | CA | Metal Drill Bits | 7/32 x 6 | 7/32x6 hss-e aircraft extension drill cobalt | 2.0 |
| ||
| MESAFAST | CA | Masonry & Concrete Drill Bits | Steel | 3/16 x 4 | 3/16 x 4 carbide masonry drill serrated itm | 35.0 |
| |
| MESAFAST | CA | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | Zinc/Clear | 4 1/2 x 7/8 | 4-1/2 in x 7/8 flap disc t27 60-x zirconia | 10.0 |
|
| MESAFAST | CA | Reamer Bits | 3/8 (8-1/4 oal) hss bridge reamer spiral flute | 1.0 |
| |||
| MESAFAST | CA | Metal Drill Bits | #3 | hss jobber length drill | 12.0 |
| ||
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 440-T | 440-tx-15-h apex driver bit | 20 |
| |
| Endries | WI | Reciprocating Saw Blades | Steel | 18 | 3940-150-18-hst-10p 6x .035 18tpi heavy duty reciprocating blade 10/pk | 12 |
| |
| Endries | WI | Nut Driving Bits, Nutsetters | Steel | 1/4 | 13mmx2-5/8in overall length 1/4in hex magnetic nutdriver bit | 20 |
| |
| Endries | WI | Metal Drill Bits | Steel | 0.173 | 39100 #17 190-ag high speed steel 135deg jobber drill bit | 72 |
| |
| Endries | WI | Machine Taps | Steel | M4-0.75 | 83040 m4x.75 3 flute plug tap (consolidated toledo only) | 18 |
| |
| Endries | WI | Metal Drill Bits | Steel | 0.18 | #15 t115 jobbers drill bit #01580 | 12 |
| |
| Endries | WI | Masonry & Concrete Drill Bits | Steel | 3/8 x 12 | 1332 3/8x12 rawl sds wedge bit (powers) | 2 |
| |
| Endries | WI | Metal Drill Bits | Steel | 0.191 | #11 t115 jobbers high speed steel drill bit #01540 | 12 |
| |
| Endries | WI | Reciprocating Saw Blades | Steel | 4 | 48-00-5181 4in 14 teeth per inch super sawzall blade 5/pack | 1 |
| |
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | Steel | 1/8 | b51250 1/8 4 flute flat carbon long length end mill | 10 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 15 | 70139 size 15 torx driver tamperproof torx-licensed bit (wiha) | 70 |
| |
| Endries | WI | Nut Driving Bits, Nutsetters | Steel | 1/4 x 4 | 1100mn416s 1/4x4 overall length 1/4 shank magnetic nutsetters (vega) | 20 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 125p2ax 2x1 overall length phillips insert bit vega industries | 15 |
| ||
| MESAFAST | CA | Machine Taps | #8-32 | 8-32 hss 2 flute spiral point plug tap nitro | 6.0 |
| ||
| MESAFAST | CA | Machine Taps | 1/4-20 | 1/4-20 hss 2-flute spiral point plug tap nitro | 6.0 |
| ||
| F. Solutions | OH | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 1 | cut off wheel 7x.045 7/8 arbor type 1 | 25 |
| ||
| F. Solutions | OH | Masonry & Concrete Drill Bits | #2 x 6 | impatech phillips power bit #2x6 lg | 5 |
| ||
| F. Solutions | OH | Machine Taps | spiral point plug tap m5x.80 hss bright | 3 |
| |||
| F. Solutions | OH | Machine Taps | botton tap m10-1.0 hss | 2 |
| |||
| F. Solutions | OH | Machine Taps | hand plug tap straight 3 flute 6-32 hss | 6 |
| |||
| F. Solutions | OH | Wire Wheels | Steel | core temp stringer bead (pipeline) wire brush 4x.020x5/8-11 carbon steel | 45 |
| ||
| F. Solutions | OH | Wire Wheels | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 4 x .020 x 5/8 11 | core temp stringer bead (pipeline) wire brush 4x.020x5/8-11 18-8 304 steel | 4 |
| |
| F. Solutions | OH | Machine Taps | plug tap 1/4-28 hss | 10 |
| |||
| F. Solutions | OH | Machine Taps | 3/8-24 | spiral point 2 flute plug tap hss 3/8-24 bright | 4 |
| ||
| MetricThrd | CA | Screwdriving Insert Bits & Power Bits | t10 | t-10 tamper proof torx bit for 1/4 screwdrive | 3,000 |
| ||
| MetricThrd | CA | Screwdriving Insert Bits & Power Bits | M5 | M5 hex tamperproof bit | stock |
| ||
| MetricThrd | CA | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Class 10.9 | Zinc/Clear | M12-1.50 x 36 | M12-1.50x36 cl 10.9 zn wheel studs w/round head | stock |
|
| BAYFASTCO | FL | Machine Dies | 1/4-20 | 1/4-20 wash based wing nut die | 3838 |
| ||
| BAYFASTCO | FL | Machine Dies | Plastic | Plain | 1/8 x 4 x 8 | 1/8 x 4 x 8 die cut poly-vinyl | 1100 |
|
| BAYFASTCO | FL | Masonry & Concrete Drill Bits | 3/16 x 4 | 3/16 x 4 carbide masonry drill | 353 |
| ||
| BAYFASTCO | FL | Screwdriving Insert Bits & Power Bits | #2 x 3 1/2 | #2 x 3-1/2 phillips insert bit 0.44000 | 75 |
| ||
| BAYFASTCO | FL | Metal Drill Bits | #1 | #1 hd 135 deg split point stubby 1.94000 | 24 |
| ||
| BAYFASTCO | FL | Metal Drill Bits | 3/16 x 6 | 3/16 x 6 aircraft drill bit hss | 12 |
| ||
| BAYFASTCO | FL | Metal Drill Bits | 3/8 x 8 | 3/8 x 8 aircraft drill bit hss 7.17000 | 10 |
| ||
| BAYFASTCO | FL | Metal Drill Bits | 3/16 | 3/16 x 3-1/2 tapcon drill bit | 8 |
| ||
| BAYFASTCO | FL | Metal Drill Bits | 15/64 | 15/64 jobber drill bit hss 135 | 6 |
| ||
| BAYFASTCO | FL | Masonry & Concrete Drill Bits | 7/16 x 6 5/8 | 7/16 x 6-5/8 sds+ carbide | 2 |
| ||
| BAYFASTCO | FL | Masonry & Concrete Drill Bits | 1/4 x 6 5/8 | 1/4 x 6-5/8 sds+ carbide masonry | 2 |
| ||
| BAYFASTCO | FL | Masonry & Concrete Drill Bits | 5/16 x 6 5/8 | 5/16 x 6-5/8 sds+ carbide | 2 |
| ||
| BRIGHBEST | IL | Metal Drill Bits | 1/8 x 1 | 1/8 x 1 straight hex bit | 5000 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
