FCH News

Double Ended Studs , Class 10.9

Double End Studs or Double end Stud Bolts are threaded rods with thread at both ends and a plain shank equal to that of the nominal diameter. Double end studs are used for high strength bolting. Commonly used for automotive or industrial applications.

> 200 matches, . Showing 200, (click on any line for more information)

Buy Double Ended Studs from one of our FCH Network Members
SupplierLocTypeMaterialFinishSizeDescriptionQty 
CIFILDouble End StudClass 10.9Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.)M30-3.50 x 500M30x3.5x500 double end stud 10.9 coated per ets 0967(geomet 500 b 8-12 microns) (1) (1) (1) ()1
    Contact_Supplier
CIFILDouble End StudClass 10.9PlainM36-4.00 x 655M36x4.0x655 double end stud 10.9 plain blank (1) (1) (1) ()1
    Contact_Supplier
CIFILDouble End StudClass 10.9Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.)M36-4.00 x 655M36x4.0x655 double end stud 10.9 coated per ets-0964 code 4 (geomet 500 b) roll threaded after heat treat (1) (1) (1) ()1
    Contact_Supplier
CIFILDouble End StudClass 10.9PhosphateM10-1.50 x 92.75M10x1.5x92.75 double end stud 10.9. phos coated 72 hours to red rust with hex tip per print (10343) (8343) (8343) ()8343
    Contact_Supplier
CIFILDouble End StudClass 10.9PhosphateM16-2.00 x 91.00/92.00M16x2.0x91.00/92.00 double end stud 10.9 with 15.70/16.00 diameter shoulder in middle dogpoint end phos coat with scotchgrip (1077) (45900) (3844) ()3844
    Contact_Supplier
CIFILDouble End StudClass 10.9PlainM8-1.25 x 76.5/74.5M8x1.25x76.5/74.5 double end stud 10.9 plain with external e-7 torx drive and dog point per print and 65 % locking thread plain finish (5) (5) (5) ()5
    Contact_Supplier
CIFILDouble End StudClass 10.9PlainM16-2.00 x 91.00/92.00M16x2.0x91.00/92.00 double end stud class 10.9 with 15.70/16.00 diameter shoulder in middle plain (5) (40055) ()40055
    Contact_Supplier
CIFILDouble End StudClass 10.9Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)M39-4.00 x 270M39x4.0x270 double end stud 51 thread on one end and 101 on the other 10.9 black dacromet (8) (8) (8) ()8
    Contact_Supplier
CIFILDouble End StudClass 10.9Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)M30-3.50 x 322M30x3.5x322 double end stud 10.9 (4140) with m24x3.0 on one end dacromet 500 (17) (17) (16) ()16
    Contact_Supplier
CIFILDouble End StudClass 10.9Zinc/ClearM30-3.50 x 285M30x3.5x285 double end stud 10.9 50 thread on one end 65 thread on the other zinc plated (9) (9) (9) ()9
    Contact_Supplier
CIFILDouble End StudClass 10.9PlainM36-4.00 x 560M36x4.0x560 double end stud 10.9 4140 material heat treated 33-39rc machine per print #551160 plain finish (40) (40) (40) ()40
    Contact_Supplier
CIFILDouble End StudClass 10.9Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)M36-4.00 x 560M36x4.0x560 double end stud 10.9 black dacromet with 51 thread on one end and 101 on the other end (10) (10) (10) ()10
    Contact_Supplier
CIFILDouble End StudClass 10.9Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)M36-4.00 x 560M36x4.0x560 double end stud 110 thread on one end & 65 on the other 10.9 dacromet (10) (10) (10) ()10
    Contact_Supplier
CIFILDouble End StudClass 10.9Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)M36-4.00 x 240M36x4.0x240 double end stud 10.9 with 55 thread on one end and 60 on the other with black dacromet (57) (57) (57) ()57
    Contact_Supplier
CIFILDouble End StudClass 10.9Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.)M36-4.00 x 475M36x4.0x475 double end stud 4140 heat treated to 10.9 dacromet coated (372) (372) (372) ()372
    Contact_Supplier
CIFILDouble End StudClass 10.9Zinc/ClearM16-2.00 x 91.00/92.00M16x2.0x91.00/92.00 double end stud class 10.9 with 15.70/16.00 diameter shoulder in middle zinc phos coated (66463) (103) (103) ()103
    Contact_Supplier
CIFILDouble End StudClass 10.9Zinc/YellowM24-3.00 x 120M24x3.0x120 double end stud 10.9 zinc yellow 35 on one end 50 on the other per din 939 (2333) (2333) (2333) ()2333
    Contact_Supplier
CIFILDouble End StudClass 10.9PlainM10-1.25 x 62.75M10x1.25x62.75 double end stud 10.9 with e8 torx drive on one end and dog point on other plain (16150) (107300) ()107300
    Contact_Supplier
CIFILDouble End StudClass 10.9PhosphateM8-1.25 x 76.5/74.5M8x1.25x76.5/74.5 double end stud 10.9 with external e-7 torx drive and dog point per print including 65% locking thread phos coated for 72 hours to red rust (4866) (4866) (4897) ()4897
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM12-1.50 x 57m12-1.50 x 57 10.9 zn dbl end wheel stud w/hex drive 10/4290
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM12-1.50 x 38m12-1.50 x 38 10.9 zn dbl end wheel stud w/hex drive 10/2580
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM12-1.50 x 45m12-1.50 x 45 10.9 zn dbl end wheel stud w/hex drive 10/30stock
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM12-1.25 x 38m12-1.25 x 38 10.9 zn dbl end wheel stud w/hex drive 10/26100
    Contact_Supplier
MTPCADouble End StudClass 10.9PlainM10-1.25 x 41m10-1.25 x 41 cl 10.9 double end stud thread 13/2150,386
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM10-1.25 x 72m10-1.25 x 72 cl 10.9 zn double end stud thread 13/261,550
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM10-1.25-134 x 0.9m10-1.25 x 134 cl10.9 zn double end stud per print3,055
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/ClearM10-1.25 x 41m10-1.25 x 41 cl 10.9 zn double end stud thread 13/212,100
    Contact_Supplier
MTPCADouble End StudClass 10.9Zinc/BlackM12-1.50 x 48/68m12-1.50 x 48/68 cl 10.9 bl/zn dbl end wheel stud w/hex drive 15/48 dog pointstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM10 x 25/38M10x25/38 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM10 x 40/53M10x40/53 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM6 x 40/48M6x40/48 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM12 x 35M12x35/50 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM12 x 40/55M12x40/55 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM8 x 35/45M8x35/45 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM8 x 45/55M8x45/55 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM10 x 35/48M10x35/48 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM10 x 45/58M10x45/58 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM6 x 16/23.5M6x16/23.5 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
MTPCADouble End StudClass 10.9Black OxideM12 x 50/65M12x50/65 10.9 blk double end stud bolts din 939-clstock
    Contact_Supplier
CIFILDouble End StudClass 10.9Zinc/ClearM30-3.50 x 245M30x3.5x245 double end stud 10.9 zinc plate 55 of thread on one end 100 thread on the other (6) (6)6
    Contact_Supplier
MMCCILDouble End StudClass 10.9Zinc/YellowM8 x 35double end stud 10.9 zinc yellow 8x35 din 835 class 10.9 zinc/yellow4
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM12 x 30double end stud 10.9 12x30 din 939 class 10.9 plain13
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM30 x 150double end stud 10.9 30x150oal din 939 class 10.9 plain2
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM30 x 220double end stud 10.9 30x220 din 939 class 10.9 plaininquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9Zinc/ClearM12 x 70double end stud 10.9 zinc 12x70 class 10.9 zinc/clearinquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM16 x 70m16x70 double end stud-10.9-plain-16x70 din 939 class 10.95
    Contact_Supplier
MMCCILDouble End StudClass 10.9Zinc/ClearM10 x 100m10x100 double end stud din 835 class 10.9 zinc plateinquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM24 x 150m24x150 double end stud din 939 class 10.9inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM16 x 65m16x65 double end stud din 939 class 10.9inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM16 x 180m16x180 double end stud 10.9 din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM10 x 72m10x72 double end stud 10.9 oal din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM12 x 110m12x110 double end stud 10.9 din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM12-1.25 x 105m12x1.25x105oal 45/45 double end stud 10.9 right hand/left 12x1.25x105oa din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM16 x 120m16x120 double end stud 10.9 plain din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM20 x 160m20x160 double end stud 10.9 plain din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM20 x 130m20x130 double end stud 10.9 plain din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM20 x 210m20x210 double end stud 10.9 plain din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM6 x 80m6x80oal double end stud 10.9 plain din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM8 x 80m8x80oal double end stud 10.9 plain din 939inquire
    Contact_Supplier
MMCCILDouble End StudClass 10.9PlainM8 x 130m8x130oal double end stud 10.9 plain din 939inquire
    Contact_Supplier
WDMBIADouble End StudClass 10.9PlainM8 x 65thrstud de b18.2.3.4m 10.9 m8x65 (W020)223
    Contact_Supplier
WDMBIADouble End StudClass 10.9PlainM20 x 39 0double end stud stiftschr. 10.9 (phr) m20x390/e=30 nzg20
    Contact_Supplier
ISSCOMODouble End StudClass 10.9PlainM12-1.75 x 20025 mm oe patchlok, 45mm oe, 200 mm oa565
    Contact_Supplier
General FMIDouble End StudClass 10.9PlainM10-1.50 x 62.5M10-1.5x62.5 dbl end stud 10.9 mod634
    Contact_Supplier
General FMIDouble End StudClass 10.9PlainM16-1.50 x 80M16-1.5x80 dbl end stud cl10.932,380
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM10 x 75M10x75 10.9 plain finish double end stud din 835foinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM12 x 45M12x45 10.9 plain finish double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM20 x 165M20x165 10.9 plain finish double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM16 x 160M16x160 10.9 plain finish double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM42 x 765M42x765 10.9 plain finish double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9Zinc/ClearM30 x 600M30x600 10.9 zinc plated double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM42 x 265M42x265 10.9 plain finish double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM16 x 65M16x65 10.9 plain finish double end stud metal end 1.25d din 939inquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM20 x 70m20 x 70 din 938 10.9 plain finish double end stud metal end 1dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM16 x 40m16 x 40 din 939 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM16 x 60m16 x 60 din 939 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM12 x 70m12 x 70 din 939 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM16 x 180m16 x 180 din 939 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM20 x 60m20 x 60 din 939 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM10 x 30m10 x 30 din 939 10.9 plain finish double end stud metal end 1.25d50
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM12 x 160m12 x 160 din 939 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM6 x 28m6 x 28 din 939 fo 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM8 x 30m8 x 30 din 939 fo 10.9 plain finish double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9Zinc/ClearM6 x 28m6 x 28 din 939 fo 10.9 zinc plated double end stud metal end 1.25dinquire
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9Zinc/ClearM8 x 30m8 x 30 din 939 fo 10.9 zinc plated double end stud metal end 1.25dinquire
    Contact_Supplier
FastWareSaskDouble End StudClass 10.9Zinc/YellowM20-2.50 x 325double ended stud 68 thread one end 53 thread with dog point other end reva102
    Contact_Supplier
FastWareSaskDouble End StudClass 10.9Zinc/YellowM24-3.00 x 120oal double end threaded stud 50 thread one end 35 thread other end rev a din 93931
    Contact_Supplier
EurolinkSCDouble End StudClass 10.9PlainM48-5.00 x 650m48 -5.0 x 650 double-end stud 10.9inquire
    Contact_Supplier

Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.