FCH Member Advertisement
FCH News
3 inch length Ball Bearings
A ball bearing is a type of rolling-element bearing that uses spherical balls to maintain separation between two concentric rings, called races, allowing for smooth relative motion between machine parts while minimizing friction. The primary function of a ball bearing is to reduce rotational friction and support both radial (perpendicular to the shaft) and axial (along the shaft) loads. It achieves this by using at least two races to contain the balls and transmit the loads through them: typically, one race is fixed while the other rotates with the shaft or hub
7 results, (click on any line for more information)
| Buy Ball Bearings from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 5/8 x 3 | pin ball detent with split ring | 4 |
|
| SWACO | OH | Ball Bearings, Balls, Bearing Mounts | Plain | 3 x 3 | 3l3-f nyliner flange bearing | 5477 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Steel | Plain | 12 x 3 | 12x3 semi-steel wheel 1 roll.brg. | 5 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 6 x 3 | wheel sz 6 x 3 mat cast iron gray enamel finish bearing roller bearing bore 1-1/4 bore less bearing 1-15/16 hub length 3-1/4 load cap 2800 lbs temp rt-45 to +800 f | 40 |
|
| THRDFAST | FL | Ball Bearings, Balls, Bearing Mounts | 1/2 x 3 | 1/2 drivex3 extension w/friction ball | 2 |
| ||
| THRDFAST | AL | Ball Bearings, Balls, Bearing Mounts | 1/2 x 3 | 1/2 drivex3 extension w/friction ball | 2 |
| ||
| All Size | TX | Ball Bearings, Balls, Bearing Mounts | 1/4 x 3 | 1/4 x 3 carbide end mill se 4fl ball nose center cut tiain coated | 6 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
